Product Description
Company Introduction:
ZHangZhoug Hua Chuang New Energy Commercial Vehicle Co., LTD. (hereafter referred to as HCCV) is a high-tech enterprise focusing on the R&D, manufacturing and sales of new energy commercial vehicles and its core components.
At present, the company covers an area of 240,000 square meters, with a building area of 140,000 square meters, with full vehicle production conditions including stamping, welding, painting, final assembly. HCCV’s total investment is 2 billion yuan, and the production line is designed to have an annual capacity of 60,000 vehicles. The company adopts the intelligent manufacturing demonstration application factory as the construction standard, which has a high degree of intelligence, automation,informatization and digital characteristics.
Production Information:
400V Ev motor Drive System 80KW 3 IN ONE(Electronic top or side optional) Suitable for Passenger Car Bus Truck
Model HCEDU308
| Voltage | 260-450Vdc |
| Max Power | 80 KW |
| Max Torque | 150N.m |
| Motor CHINAMFG Speed | 12000RPM |
| Rated power | 30KW |
| Rated Torque | 80N.m |
| Torque control accuracy | 100 N.m Below ± 3N.m 100 N.m Above ± 3% |
| Protection Level | IP67 |
| Water Cooling Vol. | 8L/ min, 65 degree |
| Gear Ratio | 6.7-11 |
| 3 IN 1 Efficiency | 93.2% |
Service:
The core technical team of HCCV has been deeply engaged in the whole industry of automotive equipment manufacturing, body development and vehicle R&D for more than 20 years. On this foundation, a new Commercial Vehicle Technology Research Institute has been established. It has the ability to develop the whole process of commercial vehicle R&D from product positioning strategy, concept plHangZhou, vehicle modelling, engineering structural design, CAE/SE analysis, tooling development, and prototype trial production to mass production.
Packing & Delivery :
4PCS/ CTN
FAQ:
1. Are you manufacturer or trading company ?
We are a professional manufacturer.
2. How long for the delivery time ?
Normally, it takes about 15-18 days for normal type and 30-60 days for small change OEM product.
3. How many years do you make this product?
We have 20 years experience for truck cabin and truck and 15 years for ev motor.
4. How about the guarantee time ?
We will carry out the guarantee according to the industry level.
5. Do you have the production line for PMSM motor ?
Yes. We have full production line for PMSM motor and its controller.
As to 60kw-250kw PMSM motor, we have automatic production line.
As to 30KW-60kw PMSM motor, we have half-automatic production line.
As to the controller, we have full production line from chips to final controller module.
6. Do you do OEM & ODM project ?
Any OEM&ODM project are warmly welcome.
7. Where do you ship ?
Normally, we ship from HangZhou or ZheJiang port.
If you need, we can do any port in China.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Car, Truck |
|---|---|
| Operating Speed: | Adjust Speed |
| Operation Mode: | Electric Motor |
| Samples: |
US$ 4900/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What maintenance practices are essential for prolonging the lifespan of an electric motor?
Maintaining electric motors is crucial for prolonging their lifespan and ensuring optimal performance. Proper maintenance practices help prevent failures, minimize downtime, and maximize the efficiency and reliability of electric motors. Here’s a detailed explanation of essential maintenance practices for prolonging the lifespan of an electric motor:
- Regular Inspections: Conduct regular visual inspections of the motor to identify any signs of wear, damage, or loose connections. Inspect the motor’s external components, such as the housing, bearings, cooling fans, and cables. Look for any unusual noise, vibration, or overheating during operation, as these can indicate potential issues that require attention.
- Lubrication: Proper lubrication is vital for the smooth operation and longevity of electric motors. Follow the manufacturer’s guidelines for lubrication intervals and use the recommended lubricants. Apply lubrication to bearings, shafts, and other moving parts as specified. Over-lubrication or using incompatible lubricants can cause overheating and premature wear, so it’s essential to follow the recommended practices.
- Cleaning: Keep the motor clean and free from dirt, dust, and debris that can accumulate over time. Regularly clean the motor’s exterior using a soft brush or compressed air. Ensure that cooling vents and fans are clear of any obstructions to maintain proper airflow and prevent overheating. Cleanliness helps prevent insulation damage and improves heat dissipation.
- Alignment and Balance: Misalignment or imbalance in the motor’s shaft and coupling can lead to excessive vibrations and premature wear. Regularly check and correct any misalignment or imbalance issues using precision alignment tools. Proper alignment and balance reduce stress on bearings and extend their lifespan, contributing to the overall longevity of the motor.
- Temperature Monitoring: Monitor the motor’s temperature during operation using temperature sensors or thermal imaging techniques. Excessive heat can damage insulation, bearings, and other components. If the motor consistently operates at high temperatures, investigate the cause and take corrective actions, such as improving ventilation, reducing loads, or addressing any cooling system issues.
- Electrical Connections: Inspect and tighten electrical connections regularly to ensure secure and reliable connections. Loose or corroded connections can lead to voltage drops, increased resistance, and overheating. Check terminal blocks, wiring, and motor leads for any signs of damage or degradation. Properly torquing electrical connections and addressing any issues promptly helps maintain electrical integrity.
- Vibration Analysis: Perform regular vibration analysis to detect any abnormal vibration patterns that could indicate underlying issues. Vibration analysis tools and techniques can help identify unbalanced rotors, misalignment, bearing wear, or other mechanical problems. Addressing vibration issues early can prevent further damage and improve motor performance and longevity.
- Periodic Testing and Maintenance: Conduct periodic testing and maintenance based on the manufacturer’s recommendations and industry best practices. This may include insulation resistance testing, winding resistance testing, bearing lubrication checks, and other diagnostic tests. Such tests help identify potential problems before they escalate and allow for timely maintenance and repairs.
- Training and Documentation: Ensure that maintenance personnel are properly trained in electric motor maintenance practices. Provide training on inspection techniques, lubrication procedures, alignment methods, and other essential maintenance tasks. Maintain comprehensive documentation of maintenance activities, including inspection reports, maintenance schedules, and repair records.
By implementing these maintenance practices, motor owners can significantly prolong the lifespan of electric motors. Regular inspections, proper lubrication, cleaning, alignment, temperature monitoring, electrical connection maintenance, vibration analysis, periodic testing, and training contribute to the motor’s reliability, efficiency, and overall longevity.
What safety precautions should be followed when working with electric motors?
Working with electric motors requires adherence to specific safety precautions to ensure the well-being of individuals and prevent accidents. Electric motors involve electrical hazards that can cause electric shock, burns, or other injuries if proper safety measures are not followed. Here’s a detailed explanation of the safety precautions that should be followed when working with electric motors:
- Qualified Personnel: It is important to assign work on electric motors to qualified personnel who have the necessary knowledge, training, and experience in electrical systems and motor operation. Qualified electricians or technicians should handle installation, maintenance, and repairs involving electric motors.
- De-Energization and Lockout/Tagout: Before performing any work on electric motors, they should be de-energized, and appropriate lockout/tagout procedures should be followed. This involves isolating the motor from the power source, ensuring that it cannot be energized accidentally. Lockout/tagout procedures help prevent unexpected startup and protect workers from electrical hazards.
- Personal Protective Equipment (PPE): When working with electric motors, appropriate personal protective equipment should be worn. This may include insulated gloves, safety glasses, protective clothing, and footwear with electrical insulation. PPE helps protect against potential electrical shocks, burns, and other physical hazards.
- Inspection and Maintenance: Regular inspection and maintenance of electric motors are essential to identify potential issues or defects that could compromise safety. This includes checking for loose connections, damaged insulation, worn-out components, or overheating. Any defects or abnormalities should be addressed promptly by qualified personnel.
- Proper Grounding: Electric motors should be properly grounded to prevent electrical shock hazards. Grounding ensures that any fault currents are redirected safely to the ground, reducing the risk of electric shock to individuals working on or around the motor.
- Avoiding Wet Conditions: Electric motors should not be operated or worked on in wet or damp conditions unless they are specifically designed for such environments. Water or moisture increases the risk of electrical shock. If working in wet conditions is necessary, appropriate safety measures and equipment, such as waterproof PPE, should be used.
- Safe Electrical Connections: When connecting or disconnecting electric motors, proper electrical connections should be made. This includes ensuring that power is completely switched off, using appropriate tools and techniques for making connections, and tightening electrical terminals securely. Loose or faulty connections can lead to electrical hazards, overheating, or equipment failure.
- Awareness of Capacitors: Some electric motors contain capacitors that store electrical energy even when the motor is de-energized. These capacitors can discharge unexpectedly and cause electric shock. Therefore, it is important to discharge capacitors safely before working on the motor and to be cautious of potential residual energy even after de-energization.
- Training and Knowledge: Individuals working with electric motors should receive proper training and have a good understanding of electrical safety practices and procedures. They should be knowledgeable about the potential hazards associated with electric motors and know how to respond to emergencies, such as electrical shocks or fires.
- Adherence to Regulations and Standards: Safety precautions should align with relevant regulations, codes, and standards specific to electrical work and motor operation. These may include local electrical codes, occupational safety guidelines, and industry-specific standards. Compliance with these regulations helps ensure a safe working environment.
It is crucial to prioritize safety when working with electric motors. Following these safety precautions, along with any additional guidelines provided by equipment manufacturers or local regulations, helps minimize the risk of electrical accidents, injuries, and property damage. Regular training, awareness, and a safety-focused mindset contribute to a safer working environment when dealing with electric motors.
What industries and applications commonly use electric motors?
Electric motors are widely utilized in various industries and applications due to their versatility, efficiency, and controllability. Here’s a detailed overview of the industries and applications where electric motors are commonly employed:
- Industrial Manufacturing: Electric motors are extensively used in industrial manufacturing processes. They power machinery and equipment such as conveyor systems, pumps, compressors, fans, mixers, robots, and assembly line equipment. Electric motors provide efficient and precise control over motion, making them essential for mass production and automation.
- Transportation: Electric motors play a crucial role in the transportation sector. They are used in electric vehicles (EVs) and hybrid electric vehicles (HEVs) to drive the wheels, providing propulsion. Electric motors offer benefits such as high torque at low speeds, regenerative braking, and improved energy efficiency. They are also employed in trains, trams, ships, and aircraft for various propulsion and auxiliary systems.
- HVAC Systems: Heating, ventilation, and air conditioning (HVAC) systems utilize electric motors for air circulation, fans, blowers, and pumps. Electric motors help in maintaining comfortable indoor environments and ensure efficient cooling, heating, and ventilation in residential, commercial, and industrial buildings.
- Appliances and Household Devices: Electric motors are found in numerous household appliances and devices. They power refrigerators, washing machines, dryers, dishwashers, vacuum cleaners, blenders, food processors, air conditioners, ceiling fans, and many other appliances. Electric motors enable the necessary mechanical actions for these devices to function effectively.
- Renewable Energy: Electric motors are integral components of renewable energy systems. They are used in wind turbines to convert wind energy into electrical energy. Electric motors are also employed in solar tracking systems to orient solar panels towards the sun for optimal energy capture. Additionally, electric motors are utilized in hydroelectric power plants for controlling water flow and generating electricity.
- Medical Equipment: Electric motors are crucial in various medical devices and equipment. They power surgical tools, pumps for drug delivery and fluid management, diagnostic equipment, dental drills, patient lifts, wheelchair propulsion, and many other medical devices. Electric motors provide the necessary precision, control, and reliability required in healthcare settings.
- Robotics and Automation: Electric motors are extensively used in robotics and automation applications. They drive the joints and actuators of robots, enabling precise and controlled movement. Electric motors are also employed in automated systems for material handling, assembly, packaging, and quality control in industries such as automotive manufacturing, electronics, and logistics.
- Aerospace and Defense: Electric motors have significant applications in the aerospace and defense sectors. They are used in aircraft for propulsion, control surfaces, landing gear, and auxiliary systems. Electric motors are also employed in military equipment, drones, satellites, guided missiles, and underwater vehicles.
These are just a few examples of the industries and applications where electric motors are commonly used. Electric motors provide a reliable, efficient, and controllable means of converting electrical energy into mechanical energy, making them essential components in numerous technologies and systems across various sectors.
editor by CX 2024-04-10
China factory Electric Motor NEMA 23 425oz-in Integrated Closed Loop Stepper Motor Driver Kit vacuum pump and compressor
Product Description
Item Specifications:
Step Angle 1.8degree
Temperature Rise 80. C Max.
Ambient Temperature -20. C~+50. C
Insulation Resistance 100MΩ Min., 500VDC
Dielectric Strength 500VAC for 1 minute
Shaft Radial Play 0.02Max. (450 g-load)
Shaft Axial Play 0.08Max. (450 g-load)
Max. Radial force 75N (20mm from the flange)
Max. Axial force 15N
Description:
1.8 degree Size 57mm Hybrid stepper motor. 3D Printer stepper motor
57mm size stepper motor, NEMA23 stepping motor,
Small stepping motors, 2 phase 57mm stepper motor, Stepper motor 57mm size
Hybird Stepper Motors
1) CE and RoHS approved
2) We can develop customer design version
About our manufacturer:
We are a professional manufacturer for Stepper motor, Stepper driver, BLDC motor and DC motor. We can supply OEM service.
Our products all with CE and RoHS.
Welcome you visit our company HangZhou Jingkong Motor&Electric Appliance Co., Ltd
Depending on advanced technology and CHINAMFG service, we establish a good and diligent team and keep nice business relationship with a large amount of worthy clients in global market. We are prepared to provide the best products to clients at competitive price.
High quality.
Competitive price,
Good Packing,
Fast Delivery.
Timely after-sales service.
If you need more information. Please contact with us, our contact information:
HangZhou Jingkong Motor&Electric Appliance Co., Ltd
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Printing Equipment |
|---|---|
| Speed: | High Speed |
| Number of Stator: | Two-Phase |
| Excitation Mode: | HB-Hybrid |
| Function: | Control, Driving |
| Number of Poles: | 2 |
| Customization: |
Available
|
|
|---|
How do electric motors contribute to the efficiency of tasks like transportation?
Electric motors play a significant role in enhancing the efficiency of various transportation tasks. Their unique characteristics and advantages contribute to improved performance, reduced energy consumption, and environmental benefits. Here’s a detailed explanation of how electric motors contribute to the efficiency of tasks like transportation:
- High Energy Conversion Efficiency: Electric motors are known for their high energy conversion efficiency. They can convert a large percentage of electrical energy supplied to them into mechanical energy, resulting in minimal energy losses. Compared to internal combustion engines (ICEs), electric motors can achieve significantly higher efficiencies, which translates to improved energy utilization and reduced fuel consumption.
- Instant Torque and Responsive Performance: Electric motors deliver instant torque, providing quick acceleration and responsive performance. This characteristic is particularly advantageous in transportation tasks, such as electric vehicles (EVs) and electric trains, where rapid acceleration and deceleration are required. The immediate response of electric motors enhances overall vehicle efficiency and driver experience.
- Regenerative Braking: Electric motors enable regenerative braking, a process where the motor acts as a generator to convert kinetic energy into electrical energy during deceleration or braking. This recovered energy is then stored in batteries or fed back into the power grid, reducing energy waste and extending the vehicle’s range. Regenerative braking improves overall efficiency and helps maximize the energy efficiency of electric vehicles.
- Efficient Power Distribution: Electric motors in transportation systems can be powered by electricity generated from various sources, including renewable energy. This allows for a diversified and cleaner energy mix, contributing to reduced greenhouse gas emissions and environmental impact. By utilizing electric motors, transportation tasks can leverage the increasing availability of renewable energy resources, leading to a more sustainable and efficient transport ecosystem.
- Reduced Maintenance Requirements: Electric motors have fewer moving parts compared to ICEs, resulting in reduced maintenance requirements. They eliminate the need for components like spark plugs, fuel injection systems, and complex exhaust systems. As a result, electric motors typically have longer service intervals, lower maintenance costs, and reduced downtime. This enhances operational efficiency and reduces the overall maintenance burden in transportation applications.
- Quiet and Vibration-Free Operation: Electric motors operate quietly and produce minimal vibrations compared to ICEs. This characteristic contributes to a more comfortable and pleasant passenger experience, especially in electric vehicles and electric trains. The reduced noise and vibration levels enhance the overall efficiency and comfort of transportation tasks while minimizing noise pollution in urban environments.
- Efficient Power Management and Control: Electric motors can be integrated with advanced power management and control systems. This allows for precise control over motor speed, torque, and power output, optimizing efficiency for specific transportation tasks. Intelligent control algorithms and energy management systems can further enhance the efficiency of electric motors by dynamically adjusting power delivery based on demand, driving conditions, and energy availability.
- Reduction of Emissions and Environmental Impact: Electric motors contribute to significant reductions in emissions and environmental impact compared to traditional combustion engines. By eliminating direct emissions at the point of use, electric motors help improve air quality and reduce greenhouse gas emissions. When powered by renewable energy sources, electric motors enable nearly zero-emission transportation, paving the way for a cleaner and more sustainable transportation sector.
Through their high energy conversion efficiency, instant torque, regenerative braking, efficient power distribution, reduced maintenance requirements, quiet operation, efficient power management, and environmental benefits, electric motors significantly enhance the efficiency of tasks like transportation. The widespread adoption of electric motors in transportation systems has the potential to revolutionize the industry, promoting energy efficiency, reducing reliance on fossil fuels, and mitigating environmental impact.
Are there any emerging trends in electric motor technology, such as smart features?
Yes, there are several emerging trends in electric motor technology, including the integration of smart features. These trends aim to improve motor performance, efficiency, and functionality, while also enabling connectivity and advanced control capabilities. Here’s a detailed explanation of some of the emerging trends in electric motor technology:
- Internet of Things (IoT) Integration: Electric motors are becoming increasingly connected as part of the broader IoT ecosystem. IoT integration allows motors to communicate, share data, and be remotely monitored and controlled. By embedding sensors, communication modules, and data analytics capabilities, motors can provide real-time performance data, predictive maintenance insights, and energy consumption information. This connectivity enables proactive maintenance, optimized performance, and enhanced energy efficiency.
- Condition Monitoring and Predictive Maintenance: Smart electric motors are equipped with sensors that monitor various parameters such as temperature, vibration, and current. This data is analyzed in real-time to detect anomalies and potential faults. By implementing predictive maintenance algorithms, motor failures can be anticipated, enabling maintenance activities to be scheduled proactively. This trend reduces unplanned downtime, improves reliability, and optimizes maintenance costs.
- Advanced Motor Control and Optimization: Emerging electric motor technologies focus on advanced motor control techniques and optimization algorithms. These advancements allow for precise control of motor performance, adapting to changing load conditions, and optimizing energy efficiency. Additionally, sophisticated control algorithms enable motor systems to operate in coordination with other equipment, such as variable speed drives, power electronics, and energy storage systems, resulting in improved overall system efficiency.
- Energy Harvesting and Regenerative Features: Electric motors can harness energy through regenerative braking and energy harvesting techniques. Regenerative braking allows motors to recover and convert kinetic energy into electrical energy, which can be fed back into the system or stored for later use. Energy harvesting technologies, such as piezoelectric or electromagnetic systems, can capture ambient energy and convert it into usable electrical energy. These features enhance energy efficiency and reduce overall power consumption.
- Integration with Artificial Intelligence (AI) and Machine Learning (ML): The integration of electric motors with AI and ML technologies enables advanced motor control, optimization, and decision-making capabilities. AI and ML algorithms analyze motor performance data, identify patterns, and make real-time adjustments to optimize efficiency and performance. The combination of AI/ML with electric motors opens up possibilities for autonomous motor control, adaptive energy management, and intelligent fault detection.
- Miniaturization and Lightweight Design: Emerging trends in electric motor technology focus on miniaturization and lightweight design without compromising performance. This trend is particularly relevant for portable devices, electric vehicles, and aerospace applications. Advancements in materials, manufacturing processes, and motor design allow for smaller, lighter, and more powerful motors, enabling greater mobility, improved efficiency, and increased power density.
The integration of smart features in electric motor technology is driving advancements in connectivity, data analytics, predictive maintenance, advanced control, energy harvesting, AI/ML integration, and miniaturization. These trends are revolutionizing the capabilities and functionality of electric motors, making them more intelligent, efficient, and adaptable to various applications. As technology continues to evolve, electric motors are expected to play a crucial role in the ongoing transition towards smart and sustainable industries.
What are the different types of electric motors available?
There are various types of electric motors available, each designed for specific applications and operating principles. These motors differ in their construction, power sources, and performance characteristics. Here is an overview of some common types of electric motors:
- DC Motors: DC (Direct Current) motors are widely used and come in different configurations. The most common types include brushed DC motors and brushless DC motors. Brushed DC motors use brushes and a commutator to switch the direction of current in the rotor, while brushless DC motors use electronic commutation. DC motors offer good speed control and torque characteristics, making them suitable for applications like robotics, electric vehicles, and small appliances.
- AC Motors: AC (Alternating Current) motors are classified into several types, including induction motors, synchronous motors, and universal motors. Induction motors are popular for their simplicity and reliability. They operate based on electromagnetic induction and are commonly used in industrial and residential applications. Synchronous motors operate at a constant speed and are often used in applications that require precise control, such as industrial machinery and synchronous clocks. Universal motors are designed to operate on both AC and DC power sources and are commonly found in household appliances like vacuum cleaners and power tools.
- Stepper Motors: Stepper motors are designed to move in discrete steps or increments, making them suitable for applications that require precise positioning. They are often used in robotics, 3D printers, CNC machines, and other automated systems. Stepper motors are available in various configurations, including permanent magnet stepper motors, variable reluctance stepper motors, and hybrid stepper motors.
- Servo Motors: Servo motors are a type of motor that combines a DC motor with a feedback control mechanism. They are known for their precise control over position, velocity, and acceleration. Servo motors are commonly used in robotics, industrial automation, and applications that require accurate motion control, such as robotic arms, RC vehicles, and camera gimbals.
- Linear Motors: Linear motors are designed to produce linear motion instead of rotational motion. They operate on similar principles as rotary motors but with a different mechanical arrangement. Linear motors find applications in high-speed transportation systems, cutting machines, and other systems that require linear motion without the need for mechanical conversion from rotary to linear motion.
- Haptic Motors: Haptic motors, also known as vibration motors, are small motors used to create tactile feedback or vibrations in electronic devices. They are commonly found in smartphones, game controllers, wearable devices, and other gadgets that require haptic feedback to enhance the user experience.
These are just a few examples of the different types of electric motors available. Each type has its own advantages, limitations, and specific applications. The selection of an electric motor depends on factors such as the required torque, speed, control, efficiency, and the specific needs of the application at hand.
editor by CX 2024-03-30
China Good quality CZPT 1200W 1300W 48V 72 V Lawn Mower Electric Brushless DC Motor Kit with Great quality
Product Description
Product Description
Feature:
A. High power range from 5W to 20KW
B. Rich stock and fast shipping time in 10 working days
C. Easy for speed & direction adjustment
D. 16mm to 220mm size range with low noisy
E. Strong stability for driver/controller
F. Lifetime above continuous 10000 hours
G. IP65 protection rank is available for us
H. Above 90% enery efficiency motor is available
I. 3D file is available if customers needed
J. Permanent magnet brushless dc motor
K.High-performance and stable matching driver and controller
| Rated power(W) | Rated voltag(V) | Rated speed(r/min) | Rated torque(N.m) | Rated current(A) | L=Motor length(mm) |
| 1000W | DC48V | 3000r/min | 3.18 | 26.04A | 123mm |
| 1500W | DC48V | 3000r/pmin | 4.78 | 39.06A | 153mm |
| 2000W | DC48V | 3000r/min | 6.36 | 52.08A | 183mm |
Δ Motor interface, Voltage, Speed can be customized.
For More Details Of Product Specifications,
Please Click here contact us for updated size drawing if you have other different parameter needed. Thanks
More Motor Flange Size
Δ More Motor Flange Size to choose, if you need other size. Welcome to contact us to custom.
BLDC Motor with Gearbox Range
Company Profile
DMKE motor was founded in China, HangZhou city,Xihu (West Lake) Dis. district, in 2009. After 12 years’ creativity and development, we became 1 of the leading high-tech companies in China in dc motor industry.
We specialize in high precision micro dc gear motors, brushless motors, brushless controllers, dc servo motors, dc servo controllers etc. And we produce brushless dc motor and controller with wide power range from 5 watt to 20 kilowatt; also dc servo motor power range from 50 watt to 10 kilowatt. They are widely used in automatic guided vehicle , robots, lifting equipment,cleaning machine, medical equipment, packing machinery, and many other industrial automatic equipments.
With a plant area of 4000 square meters, we have built our own supply chain with high quality control standard and passed ISO9001 certificate of quality system.
With more than 10 engineers for brushless dc motor and controllers’ research and development, we own strong independent design and development capability. Custom-made motors and controllers are widely accepted by us. At the same time, we have engineers who can speak fluent English. That makes we can supply intime after-sales support and guidance smoothly for our customers.
Our motors are exported worldwide, and over 80% motors are exported to Europe, the United States, Saudi Arabia, Australia, Korea etc. We are looking forward to establishing long-term business relationship together with you for mutual business success.
Q1: What kind motors you can provide?
A1: For now, we mainly provide permanent magnet brushless dc motor, dc gear motor, micro dc motor, planetary gear motor, dc servo
motor, brush dc motors, with diameter range from 16 to 220mm,and power range from 5W to 20KW.
Q2: Is there a MOQ for your motors?
A2: No. we can accept 1 pcs for sample making for your testing,and the price for sample making will have 10% to 30% difference
than bulk price based on different style.
Q3: Could you send me a price list?
A3: For all of our motors, they are customized based on different requirements like power, voltage, gear ratio, rated torque and
shaft diameter etc. The price also varies according to different order qty. So it’s difficult for us to provide a price list. If
you can share your detailed specification and order qty, we’ll see what offer we can provide.
Q4: Are you motors reversible?
A4: Yes, nearly all dc and ac motor are reversible. We have technical people who can teach how to get the function by different
wire connection.
Q5: Is it possible for you to develop new motors if we provide the tooling cost?
A5: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we’ll make
our evaluation to see if we can arrange or not.
Q6:How about your delivery time?
A6: For micro brush dc gear motor, the sample delivery time is 2-5 days, bulk delivery time is about 15-20 days, depends on the
order qty. For brushless dc motor, the sample deliver time is about 10-15 days; bulk time is 15-20 days.Please take the sales
confirmation for final reference.
Q7:What’s your warranty terms?
A6: One year
| Application: | Universal, Industrial, Household Appliances, Power Tools |
|---|---|
| Operating Speed: | Adjust Speed |
| Excitation Mode: | Compound |
| Function: | Control, Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 8 |
| Samples: |
US$ 155/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
The Basics of a Gear Motor
The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Induction worm gear motor
If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Parallel shaft helical gear motor
The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Helical gear unit
This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.
editor by CX 2023-10-19
China SHINEGLE 15KW 108V144V AC Motor High Speed Electric Car Conversion Kit for tesla car motor
Guarantee: 3months-1year, 1 Year
Design Quantity: 25kw pmsm motor method
Sort: Asynchronous Motor
Frequency: 152HZ
Section: 3-stage
Shield Attribute: Completely Enclosed
AC Voltage: 320V
Performance: IE four
Rated Electrical power: 15kw
Rated Voltage: 108V
Rated Velocity: 4km safety to our clients.
Our Service Pre-Revenue Service* The customer provides inquiry* Tailor the proper technique* Sample testing help
After-Product sales Services* Well timed technological interaction* Result opinions and advancement
Packing & Supply
| Packaging | ||
| Size | 1280 (L) * 456 (W) * 789 (D) | |
| Bodyweight | one.2 T | |
| Packaging Specifics | The standard package deal is wood box(Measurement: L*W*H). If export to European countries,the picket box will be fumigated.If container is as well tigher,we will use PE film for packing or pack it according to consumers unique request. | |
| Packaging | ||
| Dimensions | 123 (L) * 456 (W) * 789 (D) | |
| Bodyweight | 100kg | |
| Packaging Specifics | The standard package is picket box(Measurement: L*W*H). Often we decide on cartons when we send out cargo by air. | |
Electric Automobile Conversion Package
DC Motor Controller
AC Motor Controller
FAQ 1.Q: How to select the proper motor for electrical car?AC motor, BLDC motor and PMSM motor are the major 3 types of motor that are employed in electric powered auto. About their variation, make sure you check out the post on our website: ?spm=a2700.7756200.1998619056.12.0qhJST2.Q: Is your controller appropriate with ac & dc motor?Yes. Which means it can be employed in the two ac and dc motor.3. Q: How to install them in motor vehicle?We will provide instruction and technological help online to support customers to make it work.4. Q: How to create an electrical car or hybrid auto?Even though we are the provider of electrical car elements, we are determined to solve problems for clients. So if you do not have feelings, we are happy to be of help. Just get in touch with us.
As a company that is of R&D potential, we are now plHangZhou to develop controllers for diverse programs, such as electric bus, road sweeper, mobility scooter for the senior, electric bike, and so forth. If you are in require, just send out us inquiry or chat with us by Trade Supervisor.Come to feel cost-free to contact us if you have any problem for we have self confidence in providing an best resolution for you with fifteen-12 months expertise in developing motor and motor handle method.
How to Select a Gear Motor
A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.
Angular geared motors
Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Planetary gearboxes
Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Hydraulic gear motors
Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Croise motors
There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.
editor by czh 2023-02-21
China factory Efficient EV Motor Permanent CZPT Motor Drive Motor Electric Car Conversion Kit for Electric Bus with Free Design Custom
Product Description
Product Description
K01 Series EV motor is made for 8-12m electric powered town bus. The power assembly adopts the integrated design and style of the motor and motor controller. Integrated layout, modest footprint, convenient for automobile structure EMC CZPT a few-section wiring harness Radiation, although minimizing power loss on the wiring harness lowering procurement expenses. Attain the intercontinental initial-course design stage. The powertrain adopts axial integration in composition, and the motor controller is integrated into the place of the motor rear go over, which is especially appropriate for industrial cars. Central direct-drive transmission format.
Item Parameters
| TZ400XS Collection Motor Specification | |||||
| Model | Rated/Peak Power (kW) |
Rated Voltage (VDC) |
Rated/Peak Speed (rpm) |
Rated/Peak Torque (N.m) |
Applicable types |
| 90-k01 | ninety/150 | 576 | 1350/3100 | 636.7/1700 | eight.5m Bus |
| 90-k02 | 90/170 | 576 | a thousand/2700 | 860/2150 | 8.5-ten.5m Bus |
| one hundred-k01 | 100/200 | 576 | 1000/2500 | 955/2500 | ten.5-12m Bus |
| one hundred twenty-k01 | a hundred and twenty/two hundred | 576 | 955/2500 | 1200/2800 | 12m Bus |
In depth Images
Our Advantages
(1) Large efficiency rate: ninety nine% (peak benefit), ≥95% (high efficiency location ≥65%)
(2) Large-precision management: fast and correct torque handle and pace manage
(5) High-reliability automotive-grade IGBT electrical power module
(6) IGBT gate-amount drive with integrated defense perform
(7) Protected and dependable fault detection and handling steps
(8) Comply with the national necessary EMC requirements for electrical and electrical automobiles
(9) The assembly program matches the permanent CZPT synchronous motor, which has higher vitality suggestions traits, and the effectiveness is elevated by 5%
(10) Integrated style, completely adopts customized remedies, caters to market place need, and sets market benchmarks.
Organization Profile
FAQ
Q1. What are your phrases of packing?
A: Usually, we pack our products in CZPT white bins and paper cartons. If you have a lawfully registered brand, we can pack the merchandise in your branded bins after receiving your authorization letters.
Q2. What are your phrases of payment?
A: T/T fifty% as deposit, and fifty% ahead of supply. We will deliver you the photographs of the products and packages before you shell out the harmony. For massive orders, we accept L/C at sight.
Q3. What are your conditions of delivery?
A: EXW, FOB, CFR
This autumn. How about your supply time?
A: Normally, it will just take fifteen to 45days soon after receiving your CZPT payment. The particular delivery time depends on the objects and the amount of your purchase.
Q5. Can you generate according to the samples?
A: Sure, we can create your samples or complex drawings. We can produce the molds and fixtures in-property.
Q6. What is your sample coverage?
A: We can provide the sample if we have the areas in inventory, buyers have to shell out the sample expense and the courier value.
Q7. Do you take a look at all your goods just before supply?
A: Of course, we have a 100% examination prior to shipping and delivery, if needed we can deliver an inspection report just before delivery.
Q8: How do you make our organization extended-expression and very good partnership?
A:1. We hold great top quality and aggressive price to guarantee our buyers advantage
2. We regard each client as our pal and we sincerely do organization and make pals with them, no subject in which they occur from.
Solitary-stage motors have a stator. They do not have the rotating magnetic discipline characteristics of polyphase or polyphase motors. The magnetic discipline created by the stator windings is pulsating, not rotating. When the rotor is stationary, the expansion and contraction of the stator’s magnetic subject generate an electrical recent in the rotor. The present makes the rotor magnetic discipline with the reverse polarity to the stator magnetic area. The reverse polarity applies rotational force to the upper and reduce components of the rotor. Given that this force passes by way of the heart of the rotor, it stays equivalent in every single course, keeping the rotor stationary. If the rotor starts to change, it continues to change in the path it started out, simply because the rotor’s momentum results in a rotational power in that course. Solitary-stage motors are employed in lower-electrical power purposes this kind of as ceiling supporters, mixer grinders, and house appliances these kinds of as transportable electrical power instruments.
Solitary-stage motors have a stator. They do not have the rotating magnetic field attributes of polyphase or polyphase motors. The magnetic subject created by the stator windings is pulsating, not rotating. When the rotor is stationary, the enlargement and contraction of the stator’s magnetic area generate an electrical current in the rotor. The recent produces the rotor magnetic area with the opposite polarity to the stator magnetic field. The reverse polarity applies rotational pressure to the upper and lower components of the rotor. Because this force passes by means of the middle of the rotor, it continues to be equal in each route, retaining the rotor stationary. If the rotor commences to switch, it continues to flip in the direction it started out, simply because the rotor’s momentum generates a rotational drive in that path. One-stage motors are utilised in low-electrical power apps these kinds of as ceiling supporters, mixer grinders, and home appliances such as transportable energy equipment.
China Professional CZPT Electric Scooter Motor Wheel Kit Scooter 5inch Hub Motor (TZD303) with Hot selling
Solution Description
Product Description
TZD303 Hub Motor Wheel
This model is well-known in the market now.It can be implement for electrical scooter.In the international countries, it can be share with the community.It has the greater tyre,it is much more safer than skatebroad.The tyre is 90 mm,it really is extensive adequate to load a aduld ‘s bodyweight.It is our new item this month.
Merchandise Parameters
| Item | Info |
| Product | TZD303 |
| Power | 50~250W |
| Fee Voltage | DC 24V/36V |
| No-load Current | .3~1.3A |
| No-load Pace | 350~1600rpm |
| Tyre | The inflate-free tyre |
| Brake mode | Holding brake |
| Internet weight | 1.9Kg(with tyre) |
| Effectiveness | ≥84% |
Proportions
Product Benefits
Versatile travel method
Regardless of whether it is a front-wheel push/ rear-wheel push / 4-wheel push,
it can be implemented fairly simply.
Efficient maintenance
BLDC motor,It’s convient to preserve in the future.
Merchandise Composition
Certifications
Organization Profile
ZHangZhoug CZPT Engineering Co., Ltd launched 2015, in ZHangZhouG styles, manufactures and sells agv, driving wheel assembly, DC/AC motors, encoder, reducer, controller, caster wheel, equipment, Pu wheel, motor in wheel units and all in excess of the world.
TZBOT proceeds to deliver outstanding items, technological innovation and relieve of customizing to the automatic equipment.
The manufacturing facility, is one thousand sq. ft, and employs 50 individuals. The firm is licensed to ISO9001:2015.
The core to TZBOT’s development is the continual dedication to the pursuit of full consumer satisfaction. They have a strong presence in domestic and global markets, as nicely as, fantastic generation overall flexibility. CZPT has come to be regarded as 1 of the biggest suppliers of electrical push.
Ongoing expenditure in the most CZPT machinery has additional enhanced and designed the good quality and flexibility of each solution.
Today, CZPT can rapidly layout and generate engines and particular areas request from buyers.
TZBOT’s solution are used in a myriad of application, including but not minimal to: Forklifts, AGV, Aerial Platforms, Airport Machines, Agricultural Machines, Hydraulic Programs, Floor Scrubbers, Sweepers, Wind Power, Marine, and in the area of Health care Products.
All prototypes are analyzed for prolonged intervals of time to confirm the top quality and the duration will function completely ahead of sending production parts to clients. Due diligence is paramount to the pleasure of our consumers.
FAQ
Q: Payment
A: Our payment is T/T, Paypal, West Union, Trade Assurance(Ali spend or E-verify), L/C, and D/P.
Q: Following-sale service
A: For certain top quality all items, we check out all products’ quantity 2 times. The initial time is conclude of manufacturing, the second time is before packing into cartons. If any carelessness or accident about our items, after obtained products inside ten times, make sure you never fear to get in touch with us at any time. We will reply you in 24 several hours and enable you choose solutions to fulfill your satisfactory.
Q: Our advantage
A: Totally free cameraman unique for you: Source higher quality pictures for you right after requested. Preserve tax: We can make C/O, Type E, Type-F and so on. They can assist you preserve ten~30$ custom tax. Minimize freight rate: We compress beds, integration space and talk with specific. Just for conserving freight charge for consumer. Generally, by the way, it can help save about 20%~35% delivery expense. And we are striving to improve all the time. We have a skilled technological crew: We can offer a total selection of pre-sale consulting and right after-sale specialized assistance.
AC motors vary from a lot of other kinds of motors, specifically some of the a lot more familiar DC (direct present) motors, by numerous essential requirements. The most simple of these is the reality that an AC motor depends entirely on the alternating current around its circuit to create effective mechanical vitality. We’ll talk about this unique method in far more depth in the adhering to sections of this guide.
Two varieties of AC motors include: Synchronous: The reality that a synchronous motor rotates at the identical charge as the frequency of the mains current provides the motor its name. A synchronous motor is composed of a stator and a rotor. Synchronous motors have a extensive selection of apps. Induction: Induction motors are the most straightforward and strongest motors offered. These AC motors consist of two electrical components: a wound stator and rotor assembly. The current required to change the rotor is produced by the electromagnetic induction designed by the stator windings. Induction motors are a single of the most generally utilized kinds of motors in the world.
China factory 2 Phase NEMA23 57mm 2.2n. M 4.2A Electric Brushless Step Stepper Stepping Motor Kit with Brake for 3D Printer with Free Design Custom
Product Description
two section nema23 57mm 2.2N.m 4.2A electrical brushless step stepper stepping motor package with brake for 3D printer
Item Description
Performance parameter
|
Model |
Shaft extension |
Holding Torque |
Positioning Torque |
Existing /stage |
Resistance /period |
Inductance /section |
Rotor inertia |
Motor |
Motor L |
|
ZL57HS09-one thousand |
platform .5x15mm |
one.0N.m |
45mN.m |
4.2A |
.41Ω |
one.3mH |
245g.cm² |
1.1kg |
80mm |
|
ZL57HS22-one thousand |
system .5x15mm |
two.2N.m |
78mN.m |
4.2A |
.60Ω |
2.2mH |
470g.cm² |
1.4kg |
106mm |
|
ZL57HS22-1000 |
platform .5x15mm |
two.8N.m |
130mN.m |
four.2A |
.70Ω |
two.5mH |
810g.cm² |
one.6kg |
125mm |
|
ZL57HS22-E1-28 |
system .5x15mm |
2.8N.m |
130mN.m |
four.2A |
.70Ω |
2.5mH |
810g.cm² |
one.6kg |
125mm |
| ZL57HS22-one thousand-B |
platform .5x15mm |
2.8N.m |
130mN.m |
4.2A |
.70Ω |
2.5mH |
810g.cm² |
one.6kg |
125mm |
Feature:
- Large output torque, higher speed and no stage reduction
- Minimal warmth, reduced noise, reduced vibration and high precision and lengthy lifespan.
- Combine stepper motor and driver in 1 motor.
Stepper Motor substance decomposition
Dimensions (device: mm)
Motor wiring
Attention:
one. When installing the motor, be certain to use the front stop cover of the motor to set up the quit placement, and shell out attention to the cooperation, strictly guarantee the concentricity of the motor shaft and the load.
2. When the motor is linked to the driver, do not hook up the wrong phase.
Assembling approach
All varieties of 2 phase built-in open loop stepper motors for choice
Packaging & Delivery
Motor excess weight: 1400g
Driver weigth: .2kg
Motor length: 106mm
Package: carton with foam, amount for each carton will count on the motor size.
Shipping: merchandise will be deliveried by air(EMS, DHL, FedEx,TNT and so on), by prepare or by boat in accordance to your specifications.
Company Data
1. Transient introduction:
HangZhou CZPT Engineering Co., Ltd. is a CZPT business specialized in R&D, generation and revenue of industrial automation transmission items The firm gathered a big amount of R&D elites being engaged in movement handle field for much more than 10 years and constantly give expense-efficient motion manage goods for our partners.
2. Solution ranges:
Robotic Hub Servo Motor, Electronic Stepper Driver, Closed Loop Stepper Driver, Lower-voltage DC Servo Driver and Stepper Motor, Multi-axis Movement Controller and so forth.
three. Our service philosophy: Develop value for consumers.
four. Core worth: Focused, revolutionary, virtuous, and pragmatic
5. Our vision: Currently being the most skilled manufacturer in the area of automation control, serving the world-wide market
About CZPT goods on Exhibition:
Get in touch with:
Tel: -571-29799302 Cel: -13510984905
FAQ:
1. Manufacturing unit or trader?
We are manufacturing facility, and have skilled R&D staff as released in business information.
two. How about the shipping?
– Sample: 3-5 days.
– Bulk buy: 15-30 times.
three. What is your right after-income providers?
1. Cost-free upkeep within twelve months assure, life span advisor.
2. Specialist options in installation and maintence.
4. Why pick us?
one. Manufacturing facility Price & 24/7 right after-sale solutions.
2. From mildew customization to materials processing and welding, from wonderful elements to completed assembly, seventy two procedures, 24 handle details, rigid aging, finished product inspection.
5. Do you get the pertinent certification?
All merchandise are made in accordance to ISO9001, CE demands.
An AC motor is a common sort of electrical motor that is driven by alternating recent. As the most effective useful motors for everyday industrial programs (as properly as hobbyist initiatives, home products, and all other professional gear and client merchandise), AC motors provide a relatively effective method of making mechanical power from a basic electrical enter sign.
These NEMA c-plane reducers are gear toughness, maintenance-free, and can be put in in any orientation with a slip suit “O” ring design and style. Accessible in low to high reduction ratios, flange mount or base mount styles, appropriate angle or hollow shaft appropriate angle variations. Set up NEMA C-Encounter AC motors, brushless DC motors, and brushed DC motors. For 1/2 HP to 3 HP Motors NEMA 56C, 140TC, and 180TC Enter Flange Inline Helical Equipment Reducers Proper Angle Hypoid Gear Reducers
China Hot selling High Power Electric 57byg NEMA 23 0.9 Degree Hybrid Step/Stepping/Stepper Motor for Car Conversion Kit with Hot selling
Solution Description
57BYG Nema 23 .9 diploma hybrid stepper motor
| 57BYG Hybrid Step Motor | ||||||
| Basic Info | ||||||
| Item | Data | |||||
| Step Angle | 1.8° | |||||
| Tem Rise | 60K max | |||||
| Working Tem | (-20ºC~+70ºC) | |||||
| Insulation Resistance | 100MΩ min 500VDC | |||||
| Surge Test | 500VAC for 1min | |||||
| Radial Clearance | 0.O2max(450g load) | |||||
| Axial Clearance | 0.O8max(450g load) | |||||
| Max Radial Pressure | 15N(20mm from the flange) | |||||
| Max Axial Pressure | 75N | |||||
| Insulation Class | E | |||||
The specification of 57BYG Nema 23 .9 degree hybrid stepper motor
| PN | Rated Voltage |
Step Angle |
Size | Recent | Resistance | Inductance | Torque | Lead wire QTY |
Constructive inertia |
Weight |
| V DC | (°) | (L)mm | A | Ω | mH | mN.m | No. | g.cm² | g | |
| 57BYGH018 | 6.nine | 1.eight | 20 | .six | eleven.five | 23 | 580 | 4 | one hundred thirty five | 430 |
| 57BYGH117 | five.1 | 1.8 | 20 | .6 | eight.five | 125 | 480 | four | 185 | 490 |
| 57BYGH127N | six.one | 1.8 | 20 | .six | ten.two | 18.five | 480 | four | 185 | 490 |
| 57BYGH216 | five.1 | 1.eight | twenty | .six | 8.5 | ten | five hundred | 4 | 209 | 515 |
| 57BYGH312E | five.three | one.8 | twenty | .6 | eight.eight | 27 | 900 | four | 253 | 615 |
| 57BYGH413 | four.five | 1.8 | 20 | .6 | seven.5 | 15 | 760 | four | 281 | 680 |
| 57BYGH601 | four.8 | one.eight | twenty | .four | 12 | 28 | 840 | 4 | 371 | 970 |
| 57BYGH501 | four.eight | 1.eight | twenty | .4 | 12 | 38 | one thousand | four | 506 | 1050 |
| 57BYGH702 | four.4 | 1.eight | twenty | .three | 14.five | 52 | 920 | four | 573 | 1100 |
The over parameters for the traditional specs, the certain needs can be customized in accordance to customer needs.
About Probond organization
Probond motors patterns brush, brushless, stepper, hysteresis and linear motors to meet up with customers requirements.
Our motors use regular and unique components with customer chosen torque/pace demands that can be modified to your programs.
Probond motor owns skilled product sales team and engineer group with more than 10 many years encounter in motor industry, dependent on China mainland managing abroad enterprise for a long time, we know your wants far better than other people.
Probond Sonicare Toothbrush Motor and Thermostatic Valve Hysteresis Motor are our scorching goods on market in 2017 with very good quality level and aggressive price tag.
Time period of trade
| Terms of price | FOB,CIF,CFR,EXW,DDP,and so on. |
| Terms of payment | one hundred% T/T in advance for samples |
| Bulk quantity payment way can be negotited | |
| Guarantee | 12 months limited warranty once the items are delivered to the buyer. |
| Lead time | Usually within 2 weeks for trial orders, within 3 weeks for bulk orders. |
| Package | Carton o plywood pallet. |
| Place of loading | ZheJiang , HangZhou, etc. |
| Shipment carrier | Items are usually shipped via Fedex,DHL, TNT,UPS,EMS for trial orders and via vessel for bulk orders. |
| Delivery time | Usually within 5 working days by Express 15-30 working days by vessel |
Our assure to our Customers:
1. Solution customer’s inquiry in 2 working times.
2. Reply to our customer inquiries & Concerns within 3 operating days.
three. Admit Buyer purchase orders in 24 hours.
If you have any inquiry, pls truly feel free of charge to make contact with with us. Thank you.
Two varieties of AC motors contain: Synchronous: The simple fact that a synchronous motor rotates at the exact same price as the frequency of the mains current gives the motor its identify. A synchronous motor is composed of a stator and a rotor. Synchronous motors have a wide range of programs. Induction: Induction motors are the most basic and strongest motors accessible. These AC motors consist of two electrical elements: a wound stator and rotor assembly. The present essential to switch the rotor is generated by the electromagnetic induction designed by the stator windings. Induction motors are one of the most frequently utilised varieties of motors in the entire world.
Two kinds of AC motors incorporate: Synchronous: The fact that a synchronous motor rotates at the identical fee as the frequency of the mains present offers the motor its title. A synchronous motor is made up of a stator and a rotor. Synchronous motors have a vast selection of programs. Induction: Induction motors are the simplest and strongest motors accessible. These AC motors consist of two electrical factors: a wound stator and rotor assembly. The current necessary to switch the rotor is generated by the electromagnetic induction created by the stator windings. Induction motors are a single of the most frequently utilized sorts of motors in the world.
China Custom Electric Bicycle Motor Kit Small Motor Light Battery TFT Display with Good quality
Solution Description
S110 motor is a new variety of smart brushless motor which developed by our business following many a long time of investigation and development.The motor not only has the traits of scaled-down measurement and lighter excess weight, but also integrated various sensors and controllers.
S110 motor can function by just connecting the exterior battery and show.
The greatest torque can achieve a lot more than 25N.m. It make you journey This huge torque provides powerful climbing capability.
Much more than 90% electric powered conversion efficiency helps make the electrical bicycle journey lengthier.
Specification
| Specification | S110SWXRDC36 | S110SWXRDC33 | S110SWXRDC24 |
| Diameter(mm): | 110 | ||
| Width(mm) | 135±2 | ||
| Relevant flywheel | Cassette flywheel | ||
| Rated output electrical power(W) | 250 | ||
| Max.output power(W) | five hundred | ||
| Max. output torque(Nm) | 25 | ||
| Rated voltage (V) | 36 | 33 | 24 |
| Rated input present(A) | 8.seven | 9.5 | 13 |
| Max. current(A) | 8-twelve | 8-thirteen | 10-15 |
| Performance(%) | ≥91% | ≥90% | ≥89% |
| Rated revolution (r/min) | a hundred and sixty-260 | 160-260 | one hundred sixty-260 |
| Excess weight(kg) | 2.3 | 2.three | 2.3 |
Motor drawing
Packing list
| Serial No. | Goods particulars | Item No./Title | Qty(laptop) |
| 1 | S110 Intelligent rear motor | S110SWXRDC | 1 |
| two | Accessories bundle | M12 Washer | four |
| 3 | M12*1.twenty five Nut | two | |
| four | Cassette tool | one |
Reminder:
Simply because the get url only contains the motor,
it is suggested to purchase the instrument and connection cable with each other.
In addition, you can also contemplate purchasing our battery or your personal matching battery and charger and other necessary equipment, or else the motor are not able to be utilised by itself.
For more info, you should seek the advice of the product sales workers directly,
Q1.What is your terms of packing?
A: Normally, we pack our goods in brown cartons.
Q2.What is your conditions of payment?
A: one hundred%T/T.
If essential, we’ll show you the images of the items and deals ahead of you pay out the harmony.
Q3.What is your terms of shipping?
A: DDU by convey.
Q4.How about your shipping and delivery time?
A: For RTS purchase, it will just take 15 days soon after receiving your CZPT payment.The specific delivery time depends on the products and the quantity of your buy.And Sample orders supply in fifteen times.
Q5.Can you create in accordance to the samples?
A: Yes, we can supply motor with personalized logo and CZPT symbol.
Tailored logo will cost symbol price.
Q6.What is your sample plan?
A: We can supply the sample , but the customers have to spend the sample expense and the courier cost.
Q7.Do you test all your items just before delivery?
A: Of course, we have a hundred% check just before shipping and delivery
Q8:How do you make our enterprise lengthy-phrase and excellent relationship?
A: 1.We keep great top quality and aggressive cost to guarantee our customers reward.
2.We respect every single client as our buddy and we sincerely do organization and make pals with them, no subject exactly where they come from.
Q9.What is your warranty?
A:Motor : S110 motor 30 months, 15Ah battert 24 months, other elements 12 months.
Two sorts of AC motors incorporate: Synchronous: The reality that a synchronous motor rotates at the identical charge as the frequency of the mains existing provides the motor its name. A synchronous motor consists of a stator and a rotor. Synchronous motors have a wide assortment of apps. Induction: Induction motors are the easiest and strongest motors obtainable. These AC motors consist of two electrical factors: a wound stator and rotor assembly. The existing required to switch the rotor is created by the electromagnetic induction produced by the stator windings. Induction motors are one of the most typically utilised kinds of motors in the globe.
The rotor of a reluctance motor is made up of a solid cast steel component with a convex toothed rack. Their starting approach is related to an induction motor, but it operates like a synchronous motor. Generally, their rotors have fewer poles than stators, which minimizes torque ripple and prevents perfect pole alignment, as no torque is made in that location. Reluctance motors assortment in electrical power rankings from a handful of watts to about 22 kilowatts.
China Hot selling 48V10kw Electric Car BLDC motor conversion drive kit , 10kw motor convension kit ,Electric motorcycle motor kit for Electric Motorbike,Electric boat(HPM10KL) with Hot selling
Merchandise Description
Cooling/Drinking water CZPT 48v /72v /96v 10kw for Electric Motorcycle, Push Your Motorcycle Up to 100mph
Transform your gasoline powered motorcycle, scooter into electric variation very easily!
Thoroughly clean, Quiet, Productive, Light Weight, Monstrous Powerful, and Cost-effective.
Strong, Effective and Reputable BLDC Motors
We are leading manufacturer of basic-function brushless dc (BLDC) motors with power assortment from 200W to 20KW, and the voltage assortment from 24V to 120V DC. It has been widely employed for a lot of programs, eg., vehicle business, battery run bikes, scooters, electrical vehicles, forklifts, golfing buggies, boats etc. It has better performances than other traditional dc motors.
10kW Motor :
1.Voltage:48V/72V/96V/120V
two.Rated Electricity:8kW-20kW
3.Peak Energy :20kW
4.Velocity:3000-5000rpm
five. Rated torque: 26Nm
six. CZPT torque: eighty five Nm
seven. Performance: >90%
eight. Proportions: 21cm diameter, 23cm height
9.Bodyweight: 17Kg(Air),seventeen.7kg(Liquid)
ten. Cooling: Air or Liquid Cooling
The Specs of Our BLDC Motor Package:
| one. | Voltage | 48V/72V/96V/120V |
| 2. | Rated Power | 8kW-20kW |
| three. | Peak Electrical power | 20kW |
| four. | Pace | 3000-5000rpm |
| five. | Rated torque | 26Nm |
| 6. | Peak torque | 85Nm |
| 7. | Effectiveness | >90% |
| eight. | Proportions | 21cm diameter, 23cm height |
| 9. | Bodyweight | 45Kg |
| 10. | Cooling | 17Kg(Air),17.7kg(Liquid) |
Images of the 3KW -10KW BLDC Motor
VEC500
product/eKBmsgIFrUcu/China-Effective-Revolutionary-Sine-Wave-Controller-for-10kw-Brushless-Motor.html
Application of Electrical motorbike Conversion Design
3KW, 5KW, 10KW BLDC Motor for Electrical Bike from Our Customers
Why Pick US?
Our Service
one.Reply your inquiry in 24 working several hours.
2.Tailored design is offered.OEM & ODM are welcomed.
three.Specialist engineers & Unique and distinctive solution.
4.Well-skilled staffs.
five.Return Policy: For faulty items,remember to deliver us the photos to confirm then we will give you the replacement during warranty period of time.
6.Warranty :We warrant that this item shall be free from flaws in materials or workmanship for 1 12 months from the day of obtain.The guarantee of the battery is 1year from the date of buy.This warranty does not utilize to any merchandise that has been subject to misuse,abuse,carelessness or neglect.Defects triggered by tempering ,alterations and /or repairs are not lined by this guarantee.
seven.Payment :TT /PAYPAL
Seller Policy:
one.Be a part of Golden Motor Dealership Today — Our web site appeals to and redirects in excess of 5000 potential customers every day to our dealers around the world!
two.Now we have our a hundred and eighty sellers in the globe.
three.To be our vendor,you just area the first order CZPT of the minimum ten thousand$.
4.When you are to be our dealer,your info will be place on our supplier website page on our internet site.which have hundreds of website visitors every single working day.
Two sorts of AC motors contain: Synchronous: The simple fact that a synchronous motor rotates at the exact same rate as the frequency of the mains existing presents the motor its name. A synchronous motor consists of a stator and a rotor. Synchronous motors have a wide assortment of applications. Induction: Induction motors are the most straightforward and strongest motors available. These AC motors consist of two electrical parts: a wound stator and rotor assembly. The present needed to change the rotor is created by the electromagnetic induction produced by the stator windings. Induction motors are 1 of the most frequently used types of motors in the planet.
AC motors and gear motors contain single-phase motors for solitary-phase AC electricity and a few-period motors for three-section AC electrical power. A single-period motor just requirements to be related to a solitary-period energy source through the provided capacitors to operate. 3-phase motors do not call for capacitors. You merely hook up the motor directly to the three-phase AC electrical power supply. Dongfang Electrical gives a wide assortment of AC motors and gear motors Continual or variable speed AC motors are obtainable with one or three-stage gear and electromagnetic braking possibilities