Tag Archives: motor for electric car

China Professional 400V 100kw EV Motor Conversion Kit 3 in 1 with Controller Module for Electric Car Bus Truck manufacturer

Product Description

Company Introduction:
ZHangZhoug Hua Chuang New Energy Commercial Vehicle Co., LTD. (hereafter referred to as HCCV) is a high-tech enterprise focusing on the R&D,  manufacturing and sales of new energy commercial vehicles and its core components.
At present, the company covers an area of 240,000 square meters, with a building area of 140,000 square meters, with full vehicle production conditions including stamping, welding, painting, final assembly. HCCV’s total investment is 2 billion yuan, and the production line is designed to have an annual capacity of 60,000 vehicles. The company adopts the intelligent manufacturing demonstration application factory as the construction standard, which has a high degree of intelligence, automation,informatization and digital characteristics.

Production Information:
400V Ev motor Drive System  80KW 3 IN ONE(Electronic top or side optional) Suitable for Passenger Car Bus Truck 

Model HCEDU308

Voltage 260-450Vdc
Max Power 80 KW
Max Torque 150N.m
Motor CHINAMFG Speed 12000RPM
Rated power 30KW
Rated Torque 80N.m
Torque control accuracy 100 N.m Below ± 3N.m
100 N.m Above ± 3%
Protection Level IP67
Water Cooling Vol. 8L/ min, 65 degree
Gear Ratio  6.7-11
3 IN 1 Efficiency 93.2%


The core technical team of HCCV has been deeply engaged in the whole industry of automotive equipment manufacturing, body development and vehicle R&D for more than 20 years. On this foundation, a new Commercial Vehicle Technology Research Institute has been established. It has the ability to develop the whole process of commercial vehicle R&D from product positioning strategy, concept plHangZhou, vehicle modelling, engineering structural design, CAE/SE analysis, tooling development, and prototype trial production to mass production.

Packing & Delivery :


1. Are you manufacturer or trading company ?     
We are a professional manufacturer.
2. How long for the delivery time ?                       
Normally, it takes about 15-18 days for normal type and 30-60 days for small change OEM product.
3.  How many years do you make this product?   
 We have 20 years experience for truck cabin and truck and 15 years for ev motor.
4.  How about the guarantee time ?                     
We will carry out the guarantee according to the industry level.

5. Do you have the production line for PMSM motor ?
Yes. We have full production line for PMSM motor and its controller.
As to 60kw-250kw PMSM motor, we have automatic production line.
As to 30KW-60kw PMSM motor, we have half-automatic production line.
As to the controller, we have full production line from chips to final controller module.

6. Do you do OEM & ODM project ?
Any OEM&ODM project are warmly welcome.

7. Where do you ship ?
Normally, we ship from HangZhou or ZheJiang port.
If you need, we can do any port in China.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Car, Truck
Operating Speed: Adjust Speed
Operation Mode: Electric Motor
US$ 4900/Piece
1 Piece(Min.Order)


Order Sample



.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.

about shipping cost and estimated delivery time.
Payment Method:


Initial Payment

Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

electric motor

What maintenance practices are essential for prolonging the lifespan of an electric motor?

Maintaining electric motors is crucial for prolonging their lifespan and ensuring optimal performance. Proper maintenance practices help prevent failures, minimize downtime, and maximize the efficiency and reliability of electric motors. Here’s a detailed explanation of essential maintenance practices for prolonging the lifespan of an electric motor:

  1. Regular Inspections: Conduct regular visual inspections of the motor to identify any signs of wear, damage, or loose connections. Inspect the motor’s external components, such as the housing, bearings, cooling fans, and cables. Look for any unusual noise, vibration, or overheating during operation, as these can indicate potential issues that require attention.
  2. Lubrication: Proper lubrication is vital for the smooth operation and longevity of electric motors. Follow the manufacturer’s guidelines for lubrication intervals and use the recommended lubricants. Apply lubrication to bearings, shafts, and other moving parts as specified. Over-lubrication or using incompatible lubricants can cause overheating and premature wear, so it’s essential to follow the recommended practices.
  3. Cleaning: Keep the motor clean and free from dirt, dust, and debris that can accumulate over time. Regularly clean the motor’s exterior using a soft brush or compressed air. Ensure that cooling vents and fans are clear of any obstructions to maintain proper airflow and prevent overheating. Cleanliness helps prevent insulation damage and improves heat dissipation.
  4. Alignment and Balance: Misalignment or imbalance in the motor’s shaft and coupling can lead to excessive vibrations and premature wear. Regularly check and correct any misalignment or imbalance issues using precision alignment tools. Proper alignment and balance reduce stress on bearings and extend their lifespan, contributing to the overall longevity of the motor.
  5. Temperature Monitoring: Monitor the motor’s temperature during operation using temperature sensors or thermal imaging techniques. Excessive heat can damage insulation, bearings, and other components. If the motor consistently operates at high temperatures, investigate the cause and take corrective actions, such as improving ventilation, reducing loads, or addressing any cooling system issues.
  6. Electrical Connections: Inspect and tighten electrical connections regularly to ensure secure and reliable connections. Loose or corroded connections can lead to voltage drops, increased resistance, and overheating. Check terminal blocks, wiring, and motor leads for any signs of damage or degradation. Properly torquing electrical connections and addressing any issues promptly helps maintain electrical integrity.
  7. Vibration Analysis: Perform regular vibration analysis to detect any abnormal vibration patterns that could indicate underlying issues. Vibration analysis tools and techniques can help identify unbalanced rotors, misalignment, bearing wear, or other mechanical problems. Addressing vibration issues early can prevent further damage and improve motor performance and longevity.
  8. Periodic Testing and Maintenance: Conduct periodic testing and maintenance based on the manufacturer’s recommendations and industry best practices. This may include insulation resistance testing, winding resistance testing, bearing lubrication checks, and other diagnostic tests. Such tests help identify potential problems before they escalate and allow for timely maintenance and repairs.
  9. Training and Documentation: Ensure that maintenance personnel are properly trained in electric motor maintenance practices. Provide training on inspection techniques, lubrication procedures, alignment methods, and other essential maintenance tasks. Maintain comprehensive documentation of maintenance activities, including inspection reports, maintenance schedules, and repair records.

By implementing these maintenance practices, motor owners can significantly prolong the lifespan of electric motors. Regular inspections, proper lubrication, cleaning, alignment, temperature monitoring, electrical connection maintenance, vibration analysis, periodic testing, and training contribute to the motor’s reliability, efficiency, and overall longevity.

electric motor

What safety precautions should be followed when working with electric motors?

Working with electric motors requires adherence to specific safety precautions to ensure the well-being of individuals and prevent accidents. Electric motors involve electrical hazards that can cause electric shock, burns, or other injuries if proper safety measures are not followed. Here’s a detailed explanation of the safety precautions that should be followed when working with electric motors:

  1. Qualified Personnel: It is important to assign work on electric motors to qualified personnel who have the necessary knowledge, training, and experience in electrical systems and motor operation. Qualified electricians or technicians should handle installation, maintenance, and repairs involving electric motors.
  2. De-Energization and Lockout/Tagout: Before performing any work on electric motors, they should be de-energized, and appropriate lockout/tagout procedures should be followed. This involves isolating the motor from the power source, ensuring that it cannot be energized accidentally. Lockout/tagout procedures help prevent unexpected startup and protect workers from electrical hazards.
  3. Personal Protective Equipment (PPE): When working with electric motors, appropriate personal protective equipment should be worn. This may include insulated gloves, safety glasses, protective clothing, and footwear with electrical insulation. PPE helps protect against potential electrical shocks, burns, and other physical hazards.
  4. Inspection and Maintenance: Regular inspection and maintenance of electric motors are essential to identify potential issues or defects that could compromise safety. This includes checking for loose connections, damaged insulation, worn-out components, or overheating. Any defects or abnormalities should be addressed promptly by qualified personnel.
  5. Proper Grounding: Electric motors should be properly grounded to prevent electrical shock hazards. Grounding ensures that any fault currents are redirected safely to the ground, reducing the risk of electric shock to individuals working on or around the motor.
  6. Avoiding Wet Conditions: Electric motors should not be operated or worked on in wet or damp conditions unless they are specifically designed for such environments. Water or moisture increases the risk of electrical shock. If working in wet conditions is necessary, appropriate safety measures and equipment, such as waterproof PPE, should be used.
  7. Safe Electrical Connections: When connecting or disconnecting electric motors, proper electrical connections should be made. This includes ensuring that power is completely switched off, using appropriate tools and techniques for making connections, and tightening electrical terminals securely. Loose or faulty connections can lead to electrical hazards, overheating, or equipment failure.
  8. Awareness of Capacitors: Some electric motors contain capacitors that store electrical energy even when the motor is de-energized. These capacitors can discharge unexpectedly and cause electric shock. Therefore, it is important to discharge capacitors safely before working on the motor and to be cautious of potential residual energy even after de-energization.
  9. Training and Knowledge: Individuals working with electric motors should receive proper training and have a good understanding of electrical safety practices and procedures. They should be knowledgeable about the potential hazards associated with electric motors and know how to respond to emergencies, such as electrical shocks or fires.
  10. Adherence to Regulations and Standards: Safety precautions should align with relevant regulations, codes, and standards specific to electrical work and motor operation. These may include local electrical codes, occupational safety guidelines, and industry-specific standards. Compliance with these regulations helps ensure a safe working environment.

It is crucial to prioritize safety when working with electric motors. Following these safety precautions, along with any additional guidelines provided by equipment manufacturers or local regulations, helps minimize the risk of electrical accidents, injuries, and property damage. Regular training, awareness, and a safety-focused mindset contribute to a safer working environment when dealing with electric motors.

electric motor

What industries and applications commonly use electric motors?

Electric motors are widely utilized in various industries and applications due to their versatility, efficiency, and controllability. Here’s a detailed overview of the industries and applications where electric motors are commonly employed:

  1. Industrial Manufacturing: Electric motors are extensively used in industrial manufacturing processes. They power machinery and equipment such as conveyor systems, pumps, compressors, fans, mixers, robots, and assembly line equipment. Electric motors provide efficient and precise control over motion, making them essential for mass production and automation.
  2. Transportation: Electric motors play a crucial role in the transportation sector. They are used in electric vehicles (EVs) and hybrid electric vehicles (HEVs) to drive the wheels, providing propulsion. Electric motors offer benefits such as high torque at low speeds, regenerative braking, and improved energy efficiency. They are also employed in trains, trams, ships, and aircraft for various propulsion and auxiliary systems.
  3. HVAC Systems: Heating, ventilation, and air conditioning (HVAC) systems utilize electric motors for air circulation, fans, blowers, and pumps. Electric motors help in maintaining comfortable indoor environments and ensure efficient cooling, heating, and ventilation in residential, commercial, and industrial buildings.
  4. Appliances and Household Devices: Electric motors are found in numerous household appliances and devices. They power refrigerators, washing machines, dryers, dishwashers, vacuum cleaners, blenders, food processors, air conditioners, ceiling fans, and many other appliances. Electric motors enable the necessary mechanical actions for these devices to function effectively.
  5. Renewable Energy: Electric motors are integral components of renewable energy systems. They are used in wind turbines to convert wind energy into electrical energy. Electric motors are also employed in solar tracking systems to orient solar panels towards the sun for optimal energy capture. Additionally, electric motors are utilized in hydroelectric power plants for controlling water flow and generating electricity.
  6. Medical Equipment: Electric motors are crucial in various medical devices and equipment. They power surgical tools, pumps for drug delivery and fluid management, diagnostic equipment, dental drills, patient lifts, wheelchair propulsion, and many other medical devices. Electric motors provide the necessary precision, control, and reliability required in healthcare settings.
  7. Robotics and Automation: Electric motors are extensively used in robotics and automation applications. They drive the joints and actuators of robots, enabling precise and controlled movement. Electric motors are also employed in automated systems for material handling, assembly, packaging, and quality control in industries such as automotive manufacturing, electronics, and logistics.
  8. Aerospace and Defense: Electric motors have significant applications in the aerospace and defense sectors. They are used in aircraft for propulsion, control surfaces, landing gear, and auxiliary systems. Electric motors are also employed in military equipment, drones, satellites, guided missiles, and underwater vehicles.

These are just a few examples of the industries and applications where electric motors are commonly used. Electric motors provide a reliable, efficient, and controllable means of converting electrical energy into mechanical energy, making them essential components in numerous technologies and systems across various sectors.

China Professional 400V 100kw EV Motor Conversion Kit 3 in 1 with Controller Module for Electric Car Bus Truck   manufacturer China Professional 400V 100kw EV Motor Conversion Kit 3 in 1 with Controller Module for Electric Car Bus Truck   manufacturer
editor by CX 2024-04-10

China factory 12V 24V 36V Micro DC AC Gear Box BLDC Brushless Brushed Universal Table Fan Car Electric Motor for Robot /Fascia Massage Gun /Ginder/Blender/Mixer/Juicer with Hot selling

Product Description

Product Description

In such cases, CJC’s outer rotor motors are for your products: You prefer motor carrys higher inertia and builds higher force. Your are looking for high motor power with low energy consumption but with a compact size.

BLDC5530 is most suitable for stirring, vertical grinding and other low-speed vertical installation equipment with soft start, such as coffee makers, mixers, blenders, juicers, meat grinders, as well as creative new product, such as scooter board, massage gun, outboard wheels, strength loader for fitness.

Please consider the following requirements before requesting customization: motor size, controller, motor ratings, gearbox(if any), or other significant factors.
The following parameters for your reference, we could customize motor for your applications.


Rated Voltage DC 12~24V Rated Speed 3200RPM
Rated Current 5A@24V@32000RPM Torque 280mN.M
Rated Power 120-200W With Controller YES
No-Load Current 0.6A No-Load Speed 4000RPM


Characteristic of BLDC Motor:


Company Profile

Qualification Certificates:

Key Customers:



Q: Can I visit your factory before we place the order?

A: Yes. You are welcome to visit our factory.
Q: Do you accept customization?
A: Of course. We have a strong design team. Any problems will get our technical  answer.
Q: How soon can I get the price?
A: Usually we quote within 24 hours after getting your inquiry (Except weekend and holidays). If you are very urgent to get the price, please 
contact us by email or other  way so that we can quote.
Q: What’s the delivery time of samples?
A: 1-3 weeks.
Q: What’s the delivery time of mass production?
A: Normally one month. It depends on your order quantity or other special situation.
Q: What’s your payment terms?
A: T/T, Paypal, Western Union, and other payment ways is available. Please contact  us which payment ways you need before placing the order. Payment terms: 30%-50% deposit, the balance before shipment.
Q: What’s the shipping way?
A: We accept shipping way by Express (DHL, UPS, Fedex, etc), by Sea and other    shipping way. Please contact us if you need other shipping 
way before shipment.






Application: Universal, Industrial, Household Appliances
Operating Speed: Adjust Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 2-6
US$ 3.99/Piece
1 Piece(Min.Order)




electric motor

How do electric motors contribute to the efficiency of tasks like transportation?

Electric motors play a significant role in enhancing the efficiency of various transportation tasks. Their unique characteristics and advantages contribute to improved performance, reduced energy consumption, and environmental benefits. Here’s a detailed explanation of how electric motors contribute to the efficiency of tasks like transportation:

  1. High Energy Conversion Efficiency: Electric motors are known for their high energy conversion efficiency. They can convert a large percentage of electrical energy supplied to them into mechanical energy, resulting in minimal energy losses. Compared to internal combustion engines (ICEs), electric motors can achieve significantly higher efficiencies, which translates to improved energy utilization and reduced fuel consumption.
  2. Instant Torque and Responsive Performance: Electric motors deliver instant torque, providing quick acceleration and responsive performance. This characteristic is particularly advantageous in transportation tasks, such as electric vehicles (EVs) and electric trains, where rapid acceleration and deceleration are required. The immediate response of electric motors enhances overall vehicle efficiency and driver experience.
  3. Regenerative Braking: Electric motors enable regenerative braking, a process where the motor acts as a generator to convert kinetic energy into electrical energy during deceleration or braking. This recovered energy is then stored in batteries or fed back into the power grid, reducing energy waste and extending the vehicle’s range. Regenerative braking improves overall efficiency and helps maximize the energy efficiency of electric vehicles.
  4. Efficient Power Distribution: Electric motors in transportation systems can be powered by electricity generated from various sources, including renewable energy. This allows for a diversified and cleaner energy mix, contributing to reduced greenhouse gas emissions and environmental impact. By utilizing electric motors, transportation tasks can leverage the increasing availability of renewable energy resources, leading to a more sustainable and efficient transport ecosystem.
  5. Reduced Maintenance Requirements: Electric motors have fewer moving parts compared to ICEs, resulting in reduced maintenance requirements. They eliminate the need for components like spark plugs, fuel injection systems, and complex exhaust systems. As a result, electric motors typically have longer service intervals, lower maintenance costs, and reduced downtime. This enhances operational efficiency and reduces the overall maintenance burden in transportation applications.
  6. Quiet and Vibration-Free Operation: Electric motors operate quietly and produce minimal vibrations compared to ICEs. This characteristic contributes to a more comfortable and pleasant passenger experience, especially in electric vehicles and electric trains. The reduced noise and vibration levels enhance the overall efficiency and comfort of transportation tasks while minimizing noise pollution in urban environments.
  7. Efficient Power Management and Control: Electric motors can be integrated with advanced power management and control systems. This allows for precise control over motor speed, torque, and power output, optimizing efficiency for specific transportation tasks. Intelligent control algorithms and energy management systems can further enhance the efficiency of electric motors by dynamically adjusting power delivery based on demand, driving conditions, and energy availability.
  8. Reduction of Emissions and Environmental Impact: Electric motors contribute to significant reductions in emissions and environmental impact compared to traditional combustion engines. By eliminating direct emissions at the point of use, electric motors help improve air quality and reduce greenhouse gas emissions. When powered by renewable energy sources, electric motors enable nearly zero-emission transportation, paving the way for a cleaner and more sustainable transportation sector.

Through their high energy conversion efficiency, instant torque, regenerative braking, efficient power distribution, reduced maintenance requirements, quiet operation, efficient power management, and environmental benefits, electric motors significantly enhance the efficiency of tasks like transportation. The widespread adoption of electric motors in transportation systems has the potential to revolutionize the industry, promoting energy efficiency, reducing reliance on fossil fuels, and mitigating environmental impact.

electric motor

Can electric motors be used in renewable energy systems like wind turbines?

Yes, electric motors can be used in renewable energy systems like wind turbines. In fact, electric motors play a crucial role in converting the kinetic energy of the wind into electrical energy in wind turbines. Here’s a detailed explanation of how electric motors are utilized in wind turbines and their role in renewable energy systems:

Wind turbines are designed to capture the energy from the wind and convert it into electrical power. Electric motors are used in wind turbines to drive the rotation of the turbine blades and generate electricity through the following process:

  1. Wind Capture: The wind turbine blades are designed to efficiently capture the kinetic energy of the wind. As the wind blows, it causes the blades to rotate.
  2. Blade Rotation: The rotational motion of the turbine blades is achieved through electric motors known as pitch motors. Pitch motors adjust the angle or pitch of the blades to optimize their orientation relative to the wind direction. The electric motors drive the mechanical mechanism that rotates the blades, allowing them to capture the maximum energy from the wind.
  3. Power Generation: The rotation of the wind turbine blades drives the main shaft of the turbine, which is connected to an electric generator. The generator consists of another electric motor known as the generator motor or generator rotor. The rotational motion of the generator rotor within a magnetic field induces an electrical current in the generator’s stator windings, producing electricity.
  4. Power Conversion and Distribution: The electricity generated by the wind turbine’s generator motor is typically in the form of alternating current (AC). To make it compatible with the electrical grid or local power system, the AC power is converted to the appropriate voltage and frequency using power electronics such as inverters. These power electronics may also incorporate electric motors for various conversion and control functions.
  5. Integration with Renewable Energy Systems: Wind turbines, equipped with electric motors, are integrated into renewable energy systems to contribute to the generation of clean and sustainable power. Multiple wind turbines can be connected together to form wind farms, which collectively generate significant amounts of electricity. The electricity produced by wind turbines can be fed into the electrical grid, used to power local communities, or stored in energy storage systems for later use.

Electric motors in wind turbines enable the efficient conversion of wind energy into electrical energy, making wind power a viable and renewable energy source. The advancements in motor and generator technologies, along with control systems and power electronics, have enhanced the performance, reliability, and overall efficiency of wind turbines. Additionally, electric motors allow for precise control and adjustment of the turbine blades, optimizing the energy capture and minimizing the impact of varying wind conditions.

Overall, the use of electric motors in wind turbines is instrumental in harnessing the power of wind and contributing to the generation of clean and sustainable energy in renewable energy systems.

electric motor

How do electric motors handle variations in load, speed, and torque?

Electric motors are designed to handle variations in load, speed, and torque through various control mechanisms and techniques. Here’s a detailed explanation of how electric motors handle these variations:

  1. Load Variations: Electric motors can handle variations in load by adjusting the amount of torque they produce. When the load on the motor increases, such as when additional resistance or weight is applied, the motor responds by increasing the torque output. This is achieved through the control of the motor’s input current or voltage. For example, in DC motors, increasing the current supplied to the motor can compensate for the increased load, ensuring that the motor can continue to operate at the desired speed.
  2. Speed Variations: Electric motors can handle variations in speed by adjusting the frequency of the power supply or by varying the voltage applied to the motor. In AC motors, the speed is determined by the frequency of the alternating current, so changing the frequency can alter the motor’s speed. In DC motors, the speed can be controlled by adjusting the voltage applied to the motor. This can be achieved using electronic speed controllers (ESCs) or by employing pulse width modulation (PWM) techniques to control the average voltage supplied to the motor.
  3. Torque Variations: Electric motors can handle variations in torque by adjusting the current flowing through the motor windings. The torque produced by a motor is directly proportional to the current flowing through the motor. By increasing or decreasing the current, the motor can adjust its torque output to match the requirements of the load. This can be accomplished through various control methods, such as using motor drives or controllers that regulate the current supplied to the motor based on the desired torque.
  4. Control Systems: Electric motors often incorporate control systems to handle variations in load, speed, and torque more precisely. These control systems can include feedback mechanisms, such as encoders or sensors, which provide information about the motor’s actual speed or position. The feedback signals are compared to the desired speed or position, and the control system adjusts the motor’s input parameters accordingly to maintain the desired performance. This closed-loop control allows electric motors to respond dynamically to changes in load, speed, and torque.

In summary, electric motors handle variations in load, speed, and torque through various control mechanisms. By adjusting the current, voltage, or frequency of the power supply, electric motors can accommodate changes in load and speed requirements. Additionally, control systems with feedback mechanisms enable precise regulation of motor performance, allowing the motor to respond dynamically to variations in load, speed, and torque. These control techniques ensure that electric motors can operate effectively across a range of operating conditions and adapt to the changing demands of the application.

China factory 12V 24V 36V Micro DC AC Gear Box BLDC Brushless Brushed Universal Table Fan Car Electric Motor for Robot /Fascia Massage Gun /Ginder/Blender/Mixer/Juicer   with Hot selling	China factory 12V 24V 36V Micro DC AC Gear Box BLDC Brushless Brushed Universal Table Fan Car Electric Motor for Robot /Fascia Massage Gun /Ginder/Blender/Mixer/Juicer   with Hot selling
editor by CX 2023-10-20

China SHINEGLE 15KW 108V144V AC Motor High Speed Electric Car Conversion Kit for tesla car motor

Guarantee: 3months-1year, 1 Year
Design Quantity: 25kw pmsm motor method
Sort: Asynchronous Motor
Frequency: 152HZ
Section: 3-stage
Shield Attribute: Completely Enclosed
AC Voltage: 320V
Performance: IE four
Rated Electrical power: 15kw
Rated Voltage: 108V
Rated Velocity: 4km safety to our clients.
Our Service Pre-Revenue Service* The customer provides inquiry* Tailor the proper technique* Sample testing help
After-Product sales Services* Well timed technological interaction* Result opinions and advancement
Packing & Supply

Size1280 (L) * 456 (W) * 789 (D)
Bodyweightone.2 T
Packaging SpecificsThe standard package deal is wood box(Measurement: L*W*H). If export to European countries,the picket box will be fumigated.If container is as well tigher,we will use PE film for packing or pack it according to consumers unique request.
Dimensions123 (L) * 456 (W) * 789 (D)
Packaging SpecificsThe standard package is picket box(Measurement: L*W*H). Often we decide on cartons when we send out cargo by air.
Relevant Products (Click on for More Info)AC&BLDC Motor Controller3kw ac & bldc motor controller 4kw ac & bldc motor controller 5kw ac & R-3530 24V 12 Volt 6000RPM 10000RPM Electrical Motors Mini Higher Torque 35MM Diameter 12v Geared Dc Motor For Sale 36 37 MM Gearbox bldc motor controller7.5kw ac & bldc motor controller 10kw ac & bldc motor controller 15kw ac & bldc motor controllerAC Motor3kw ac motor 4kw ac motor 5kw ac motor7.5kw ac motor 10kw ac motor 15kw ac motorElectric Vehicle Conversion Kit7.5kw electric motor vehicle conversion package 10kw electrical motor vehicle conversion kit15kw electric powered vehicle conversion package
Electric Automobile Conversion Package
DC Motor Controller
AC Motor Controller
FAQ 1.Q: How to select the proper motor for electrical car?AC motor, BLDC motor and PMSM motor are the major 3 types of motor that are employed in electric powered auto. About their variation, make sure you check out the post on our website: ?spm=a2700.7756200.1998619056.12.0qhJST2.Q: Is your controller appropriate with ac & dc motor?Yes. Which means it can be employed in the two ac and dc motor.3. Q: How to install them in motor vehicle?We will provide instruction and technological help online to support customers to make it work.4. Q: How to create an electrical car or hybrid auto?Even though we are the provider of electrical car elements, we are determined to solve problems for clients. So if you do not have feelings, we are happy to be of help. Just get in touch with us.
As a company that is of R&D potential, we are now plHangZhou to develop controllers for diverse programs, such as electric bus, road sweeper, mobility scooter for the senior, electric bike, and so forth. If you are in require, just send out us inquiry or chat with us by Trade Supervisor.Come to feel cost-free to contact us if you have any problem for we have self confidence in providing an best resolution for you with fifteen-12 months expertise in developing motor and motor handle method.

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China SHINEGLE 15KW 108V144V AC Motor High Speed Electric Car Conversion Kit for tesla     car motor		China SHINEGLE 15KW 108V144V AC Motor High Speed Electric Car Conversion Kit for tesla     car motor
editor by czh 2023-02-21

China Hot Sale Curtis AC Programmable Motor Controller For Electric Car 1238-6401 motor driver

Design Variety: 1238-6401, 1238-6401
Voltage: 48V/80V
Motor Sort: AC Motor
Recent: 450A
Guarantee: 1 12 months
Application: Powered Pallet Truck
Excitation Variety: Collection Excitation
Top quality: Outstanding
Packaging Details: CARTON
Port: ZheJiang

CZPT 1238 AC induction motor controllers supply clean power not like any earlier vehicle management program. They provide unprecedented adaptability and electrical power by way of inclusion of a discipline-programmable logic controller embedded in a state-of-the-artwork motor controller.The embedded logic controller runs a entirely practical subject-oriented AC motor control operating system (OS) that can be user-tailor-made by way of parameter modification. The OS also is made up of logic to execute OEMdeveloped application, called VCL, that can be utilized to increase the controller abilities over and above the principles.The CAN bus communications included in the 1238, as well as in several other CZPT goods, enable these AC induction motor controllers to be component of an successful dispersed method. Inputs and outputs can be optimally shared throughout the program, reducing wiring and generating built-in features that usually lessen the price of the program. CZPT 1238 controllers are the excellent resolution for traction, hoist, dual drive, and other motor travel and automobile management demands.
Crucial Attributes:CURTIS Model: 1238-6401Nominal enter voltage: 72V (default placing), 48V, 60V or 80V (84V)2 Moment RMS Existing Score (amps): 450S2-sixty Moment RMS Current Rating (amps): 155MOSFET overtemperature cutback: linear cutback starts off at 100°C comprehensive cutoff at 110°CMOSFET undertemperature cutback: approx. 50% motor present at -25°C Substantial High quality Locking Set Screw 4mm Bore Double Split Shaft Collar Stainless Steelcarbon Metal Sokun comprehensive cutoff at -40°CAll lower electricity connections are created via a solitary 35-pin AMPSEAL connectorThrottle Variety: -5K Ω (default placing), flexible throttle circuitry accommodates a assortment of throttle varieties: 5kΩ–0, 0–5kΩ, 0–5V, and so forth.Working Ambient Temperature Selection: -40°C to 50°CInternal Heatsink Operating Temperature Selection: -40°C to 95°CStorage Ambient Temperature Assortment: -40° Black Hard Anodized Aluminum Roll Rubber Printing Ink Roller For Offset Printing Device C to 95°C
With many years of export experience together With several years of export expertise alongside Services Welcome Sample Purchase OEM Producing welcome: Solution, Package…
We will reply you for your inquiry in 24 hours.Our FirmHangZhou CZPT Technologies Advancement Co., Ltd. has been devoting ourselves to creating and production and other since 2004. We are located in HangZhou, ZheJiang Province, with convenient transportation entry. We employ in excess of a hundred and one – two hundred People employees users. We have accomplished wonderful advancement considering that our company was established in 2004. We abide by the motto of Firstclass high quality, Realistic price, Best service and Skilled merchandise support.
Certifications Packing & DeliveryPackage: Normally we use the standard exporting packaging. We also can in accordance to clients’ request .
1. By Couriers: DHL, UPS, FEDEX, TNT are the primary courier firms we are cooperating.2. By Air: Delivery from the ZheJiang airport to customer’s location city air port.3. By Sea: Delivery from the ZheJiang sea port .
FAQQ1. Can I have a sample get?A: Sure, we welcome sample get to check and examine good quality.Q2. What about the guide time?A: Sample requirements 3-5 days.Q3. Do you have any MOQ restrict?A: Lower MOQ, 1pc for sample checking is availableQ4. How do you ship the products and how lengthy does it get to get there?A: We generally ship by DHL, Higher Effectiveness Electrical MOTOR YS8012 3 stage asynchronous motor UPS, FedEx or TNT. It usually normally takes 3-5 days to get there. Airline and sea shipping also optional.Q5. How to move forward an buy?A: Firstly enable us know your needs or software. Next We quotation in accordance to your specifications or our suggestions. Thirdly buyer confirms the samples and areas deposit for formal get. Fourthly We set up the generation.Q6. Is it Alright to print my logo on the solution?A: Indeed. You should inform us formally ahead of our generation and confirm the layout first of all dependent on our sample.Q7: Do you offer you promise for the merchandise?A: Sure, we offer you 2years warranty to our products.Q8: How to offer with the defective?A: Our items are developed in strict quality management technique and the faulty charge will be less than .2%.

Dynamic Modeling of a Planetary Motor

A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.

planetary gear system

A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.

planetary gear train

To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?

planetary gear train with fixed carrier train ratio

The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.

planetary gear train with zero helix angle

The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!

planetary gear train with spur gears

A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.

planetary gear train with helical gears

A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.

China Hot Sale Curtis AC Programmable Motor Controller For Electric Car 1238-6401     motor driver	China Hot Sale Curtis AC Programmable Motor Controller For Electric Car 1238-6401     motor driver
editor by czh 2023-02-19

China Curtis Club Car AC Motor Controller 1236E-5421 36V 48V 450A for Electric Car wholesaler

Your session has expired. Please reauthenticate.

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China Curtis Club Car AC Motor Controller 1236E-5421 36V 48V 450A for Electric Car     wholesaler China Curtis Club Car AC Motor Controller 1236E-5421 36V 48V 450A for Electric Car     wholesaler
editor by czh 2023-02-18

China 350W 24V 36V 3100RPM High Speed MY1016 DC Gear Motor for Electric Modified Car Equipment ac motor

Guarantee: 3months-1year
Model Number: MY1016
Usage: BOAT, Car, Electric Bicycle, House Appliance
Type: Gear MOTOR
Torque: 1.28N.m
Development: Long lasting Magnet
Commutation: Brush
Safeguard Attribute: Totally Enclosed
Pace(RPM): 3100r/min
Ongoing Current(A): ≤19.4A
Performance: IE 2
Solution Title: MY1016
Rated Electricity: 350W
Rated Voltage: 24V/36V
Rated Pace: 3100r/min
Rated Existing: ≤19.4A
No-load Curernt: ≤2.0A
Efficinecy: ≥75%
IP Grade: IP44
Using Temperature: -10℃~+40℃(Nonfreezing)
Using Humidity: ≤85%(Place with out dew)
Packaging Information: carton

Product Overview 350W 24V 36V 3100RPM Large Speed MY1016 DC Equipment Motor for Electric Modified Vehicle Euipment

Rated Power350W350W
Rated Voltage24V36V
No Load Recent≤2.0A≤1.5A
No Load Velocity3100RPM3100RPM
Rated Torque1.28N.m1.28N.m
Rated Velocity2600RPM2600RPM
Rated Current≤19.4A≤12.9A
IP GradeIP44IP44
Total Dimension Design: MY1016Sorts operate: Wheelchairs electrical bike amusement apparatus agricultural equipment Merchandise introduction: Features tiny quantity, low pace, substantial output torque, minimal noise, large trustworthiness, simple upkeep, and so on. Item Information 25H 11Teeth Foundation Sprocket Style Synchronous Wheel Type Apps This kind of MY1016 motor is broadly utilized in wheelchair, tricycle, stability vehicle, Silicon carbide shaft wafer Silicon Carbide ceramic disk for gasoline electric bike,scooter, boat and other electric equioment. Why Decide on Us Bundle&Transport Outer packing: Regular export carton with necessary shipping and delivery marksInner packing: Water-proof packing with shock absorbing EPE and cardboard surroundedAs for every the clients demandsShipment: TNT, DHL, UPS, FedEx, By Sea are available. The other shipping and delivery ways are also accessible. Rigorous solution packaging makes certain that the motors is not broken for the duration of transportation. Company Profile LUNYEE INDUSTRIES Development CO, Minimal was started in 2007, is a top producer for manufacturing facility automation (FA) goods! We are focused in electrical power transmission and movement management answers! Our ProductsWe manufacture energy transmission products like AC and DC(brush/brushless) equipment motor, substantial precision planetary gearbox (spur/helical gear) for servo motor and stepping motor, linear motion products like linear bushing, linear guidebook, ball screw, locking nut and coupling and so on! Our ServiceA satisfying one-phase service comes from our ongoing innovation staff and our rigorously-inspected sub-contractors! Our items are broadly used to machine resources, industrial robotic, textile device, Substantial Precision OEM Shaft Collar with set screw instrument element packing device, meals equipment, medical device, CNC system and air problem and so on! FAQ Q: Are you investing firm or company?A: We are the motor manufacturer for 15 years in China. Q: How to order?A: deliver us inquiry → receive our quotation → negotiate specifics → confirm the sample → sign contract/deposit → mass manufacturing → cargo ready → balance/shipping and delivery → more cooperation Q: How about Sample get?A: Sample is obtainable for you. remember to contact us for details. Once we charge you sample payment, you should feel straightforward. It would be refound when you location formal purchase. Q: Which shipping way is available?A: DHL, FedEx, By Sea are offered. The other shipping and delivery approaches are also offered, remember to get in touch with us if you need ship by the other transport way. Q: How extended is the deliver, creating and shipping and delivery?A: Produce time relies upon on the amount you buy. typically it will take fifteen-twenty five operating days. Q: My package deal has lacking items. What can I do?A: Make sure you get in touch with our assistance team and we will validate your purchase with the deal contents. We apologize for any inconveniences. Q: How to affirm the payment?A: We acknowledge payment by T/T, PayPal, the other payment ways also could be acknowledged, Please make contact with us prior to you shell out by the other payment ways. Also thirty fifty% deposit is offered, Casing Clamp Sort Established Screw End Collar Shaft Break up fourteen Aluminum 12Mm Bore Double Locking the stability cash should be compensated just before shipping.If you have yet another query, pls feel cost-free to speak to us.

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China 350W 24V 36V 3100RPM High Speed MY1016 DC Gear Motor for Electric Modified Car Equipment     ac motor	China 350W 24V 36V 3100RPM High Speed MY1016 DC Gear Motor for Electric Modified Car Equipment     ac motor
editor by czh 2023-02-16

China Best Sales Reusable Electric Car Brushless Motor DC for Robot Arm with Low Price with Great quality

Product Description

Merchandise DESCRIPTION: 

Advisable Products

Model No. TQ-I-5218 Unit Tolerance
Diameter Dimension fifty two.00 mm +/-.015
 Stack Top 18.35 mm +/-.015
Design and style Voltage forty eight.00 Vdc NOM
Rated Recent 3.6 Arms NOM
Rated Energy eighty five.00 Watts NOM
Rated Torque .35 N.m NOM
Peak Torque one.10 N.m NOM
Rated Pace 3840.00 RPM NOM
Again EMF Coefficient 2.forty five Vrms/kRPM +/-ten%
 Cogging Torque <0.008 N.m NOM
Torque Fluctuation <0.08 N.m/Arms +/-10%

AC motors are also different from DC motors because most AC motors do not contain brushes. This implies that upkeep and elements substitution needs for AC motors are likely to be substantially diminished, with most customers typically anticipating a for a longer time common lifespan. As opposed to DC motors, the output velocity of numerous varieties of AC motors is frequently decided by inverter handle – yet again, we will briefly outline a assortment of possible variants on the fundamental AC motor model.
Synchronous motors run at a speed that is synchronous with the frequency of the mains present. This means that in the continual-condition of the motor, the rotation of the shaft is synchronized with the frequency of the source recent. The period of rotation of the shaft is equal to the amount of AC cycles. The stator of a synchronous motor has polyphase AC electromagnets. These electromagnets generate a magnetic field that rotates in synchrony with the current in the wire. The rotor outfitted with long term magnets or electromagnets rotates synchronously with the stator magnetic field to kind the next synchronous rotating magnetic discipline of the AC motor.

China Best Sales Reusable Electric Car Brushless Motor DC for Robot Arm with Low Price     with Great quality

China best CE Certificate 130mm AC Servo Motor 220V 2.3kw 15nm Electric Car Motor, Servo Motor and Driver, Sewing Machine Motor for Milling Machine 1500rpm with Free Design Custom

Product Description

Siheng ideal sellers 130SF-M15015 Ac Servo Motor 220V 2.3Kw 15nm Servo Motor and driver for Milling machine


one. How can we know the product high quality?

A1: We propose you to purchase a sample. Also, you can send out us electronic mail for depth pictures for examining if you can not get sufficient information in the product page. OUR Product HAS significantly advantages, this sort of effectively good quality with competitive price in domestic and overseas industry, and our research crew is lager and larger to make sure the good quality constant and well.

two. How can we get your catalog?

A2: Remember to go to under web site url to download it .-http://sihengmotor


3. Can we have free sample?

A3: Sorry good friend,you should shell out the sample value,but we can apply the price reduction for you.

four. Is this your ultimate cost? May possibly i have the price cut?

A4: Our cost is the factory price, and if your amount is greater, we will permit the low cost for you.


5.Is there inexpensive delivery cost to import to our nation?A5: Yes, we have our typical shipping and delivery business, they have really excellent cost.


six. Can we pay a visit to your manufacturing unit?

A6: Indeed welcome warmly. 


7.What is the Warranty for your goods?

A7: One 12 months guarantee for all digital items. If any good quality issues on our facet occured in this period of time, we will take on the delivery value and substitute.

Item Description

KA10 Motor driver dimension

DC motors use energy from batteries or other producing sources that offer a consistent voltage. A DC motor is made up of many components, the most renowned of which contain bearings, shafts, and gearboxes or gears. DC motors give greater speed variation and control and make much more torque than AC motors. The two sorts of DC motors include Brushed motors: Brushed motors are one particular of the oldest types and are internally commutated motors pushed by DC current. A brushed motor consists of a rotor, brushes, and a shaft. The demand and polarity of the brushes control the course and speed of the motor. Brushless Motors: In modern several years, brushless motors have become popular for numerous purposes, mostly simply because of their efficiency. Brushless motors are constructed in the exact same way as brushed motors, minus the brushes of course. Brushless motors also contain focused circuitry to handle speed and route. In brushless motors, magnets are mounted around the rotor, an effectiveness-boosting configuration.
The rotor of a reluctance motor is composed of a strong forged metal part with a convex toothed rack. Their beginning procedure is related to an induction motor, but it operates like a synchronous motor. Normally, their rotors have less poles than stators, which minimizes torque ripple and prevents excellent pole alignment, as no torque is developed in that spot. Reluctance motors selection in power ratings from a handful of watts to about 22 kilowatts.

China best CE Certificate 130mm AC Servo Motor 220V 2.3kw 15nm Electric Automobile Motor, Servo Motor and Driver, Stitching Device Motor for Milling Device 1500rpm     with Cost-free Style Customized

China factory Efficient EV Motor Permanent CZPT Motor Drive Motor Electric Car Conversion Kit for Electric Bus with Free Design Custom

Product Description


Product Description

K01 Series EV motor is made for 8-12m electric powered town bus. The power assembly adopts the integrated design and style of the motor and motor controller. Integrated layout, modest footprint, convenient for automobile structure EMC CZPT a few-section wiring harness Radiation, although minimizing power loss on the wiring harness lowering procurement expenses. Attain the intercontinental initial-course design stage. The powertrain adopts axial integration in composition, and the motor controller is integrated into the place of the motor rear go over, which is especially appropriate for industrial cars. Central direct-drive transmission format.

Item Parameters

TZ400XS Collection Motor Specification
Model  Rated/Peak Power 
Rated Voltage 
Rated/Peak Speed 
Rated/Peak Torque
Applicable types
90-k01  ninety/150 576 1350/3100 636.7/1700 eight.5m Bus 
90-k02 90/170 576 a thousand/2700 860/2150 8.5-ten.5m Bus 
one hundred-k01  100/200 576 1000/2500 955/2500 ten.5-12m Bus 
one hundred twenty-k01  a hundred and twenty/two hundred 576 955/2500 1200/2800 12m Bus  

In depth Images

Our Advantages

(1) Large efficiency rate: ninety nine% (peak benefit), ≥95% (high efficiency location ≥65%)
(2) Large-precision management: fast and correct torque handle and pace manage
(5) High-reliability automotive-grade IGBT electrical power module
(6) IGBT gate-amount drive with integrated defense perform
(7) Protected and dependable fault detection and handling steps
(8) Comply with the national necessary EMC requirements for electrical and electrical automobiles
(9) The assembly program matches the permanent CZPT synchronous motor, which has higher vitality suggestions traits, and the effectiveness is elevated by 5%
(10) Integrated style, completely adopts customized remedies, caters to market place need, and sets market benchmarks.

Organization Profile


Q1. What are your phrases of packing?
A: Usually, we pack our products in CZPT white bins and paper cartons. If you have a lawfully registered brand, we can pack the merchandise in your branded bins after receiving your authorization letters.
Q2. What are your phrases of payment?
A: T/T fifty% as deposit, and fifty% ahead of supply. We will deliver you the photographs of the products and packages before you shell out the harmony. For massive orders, we accept L/C at sight.
Q3. What are your conditions of delivery?
This autumn. How about your supply time?
A: Normally, it will just take fifteen to 45days soon after receiving your CZPT payment. The particular delivery time depends on the objects and the amount of your purchase.
Q5. Can you generate according to the samples?
A: Sure, we can create your samples or complex drawings. We can produce the molds and fixtures in-property.
Q6. What is your sample coverage?
A: We can provide the sample if we have the areas in inventory, buyers have to shell out the sample expense and the courier value.
Q7. Do you take a look at all your goods just before supply?
A: Of course, we have a 100% examination prior to shipping and delivery, if needed we can deliver an inspection report just before delivery.
Q8: How do you make our organization extended-expression and very good partnership?
A:1. We hold great top quality and aggressive price to guarantee our buyers advantage
   2. We regard each client as our pal and we sincerely do organization and make pals with them, no subject in which they occur from.

Solitary-stage motors have a stator. They do not have the rotating magnetic discipline characteristics of polyphase or polyphase motors. The magnetic discipline created by the stator windings is pulsating, not rotating. When the rotor is stationary, the expansion and contraction of the stator’s magnetic subject generate an electrical recent in the rotor. The present makes the rotor magnetic discipline with the reverse polarity to the stator magnetic area. The reverse polarity applies rotational force to the upper and reduce components of the rotor. Given that this force passes by way of the heart of the rotor, it stays equivalent in every single course, keeping the rotor stationary. If the rotor starts to change, it continues to change in the path it started out, simply because the rotor’s momentum results in a rotational power in that course. Solitary-stage motors are employed in lower-electrical power purposes this kind of as ceiling supporters, mixer grinders, and house appliances these kinds of as transportable electrical power instruments.
Solitary-stage motors have a stator. They do not have the rotating magnetic field attributes of polyphase or polyphase motors. The magnetic subject created by the stator windings is pulsating, not rotating. When the rotor is stationary, the enlargement and contraction of the stator’s magnetic area generate an electrical current in the rotor. The recent produces the rotor magnetic area with the opposite polarity to the stator magnetic field. The reverse polarity applies rotational pressure to the upper and lower components of the rotor. Because this force passes by means of the middle of the rotor, it continues to be equal in each route, retaining the rotor stationary. If the rotor commences to switch, it continues to flip in the direction it started out, simply because the rotor’s momentum generates a rotational drive in that path. One-stage motors are utilised in low-electrical power apps these kinds of as ceiling supporters, mixer grinders, and home appliances such as transportable energy equipment.

China factory Efficient EV Motor Permanent CZPT Motor Drive Motor Electric Car Conversion Kit for Electric Bus     with Free Design Custom

China best High Speed Motor Brushless Differential Motor 48V60V72V 1000W 1800W 2200W 3000W Brushless DC Motor for Electric Tricycle Mini Car Engine with Good quality

Item Description


Item Description

Brushless dc motor


one.Power saving increased by fifty% through variable frequency voltage.
two.Straight Replacement to Shade Pole Motors, CZPT Motors.
three.Noise reduced by 70%.
four.Output electrical power: 1w, 3w, 5w, 10w, 16w, 25w, 34w and so forth.up to 550w(Max)
5.Enter voltage :220-240VAC-fifty/60HZ,110VAC-60Hz
six.Specifically created for refrigerators, CZPT enthusiasts, air flow programs, automation and control.
seven.For a longer time support existence for tens of thousands of hrs in contrast with working time a thousand-2000 several hours for frequent motors.

Item Parameters



Design Load kind Pace Type
Voltage 60V 60V
Electricity 1500W 1500W
Velocity 3200r/min 4600r/min
Reference Velocity
(GPS Vehicle Speed)
(.5m Diameter Tire 1:ten )
(.5m Diameter Tire 1:ten )
Groove Straight Slanting
Sounds Frequent Electromagnetic Seem De-electromagnetic Audio


Design Load variety Pace Type
Voltage 72V 72V
Electrical power 1500W 1500W
Pace 3200r/min 4600r/min
Reference Pace
(GPS Vehicle Velocity)
(.5m Diameter Tire 1:ten )
(.5m Diameter Tire 1:ten )
Groove Straight Slanting
Noise Widespread Electromagnetic Sound De-electromagnetic Seem
Application Cargo vehicles, sanitation automobiles, modified vehicles, large traction autos, heavy-responsibility, large duty equipment Bus, modified cars, house tricycle, automobile
IPX rainproof, soaking prohibited
Warning Forbidding: overload use, digital relationship of stage strains, liquid soaking, use interface oil seepage differentials
Cooling Way Wind cooling


Comprehensive Pictures






Q: How to buy?
A: send out us inquiry → receive our quotation → negotiate information → confirm the sample → sign deal/deposit → mass generation → cargo ready → balance/supply → further cooperation.

Q: How about Sample purchase?
A: Sample is available for you. remember to get in touch with us for particulars. Contact us

Q: Which shipping way is avaliable?
A: DHL, UPS, FedEx, TNT, EMS, China Post,Sea are accessible.The other delivery ways are also available, you should speak to us if you need ship by the other delivery way. 

Q: How long is the supply?
A: Devliver time relies upon on the quantity you purchase. typically it requires 15-25 operating times.

Q: My package deal has missing products. What can I do?
A: You should contact our assist crew and we will validate your purchase with the package contents.We apologize for any inconveniences. 

Q: How to validate the payment?
A: We take payment by T/T, PayPal, the other payment techniques also could be acknowledged,Remember to contact us ahead of you pay out by the other payment ways. Also thirty-fifty% deposit is offered, the equilibrium money ought to be paid out just before transport.

An AC motor is a kind of motor that makes use of the phenomenon of electromagnetic induction. AC energy drives the motor. It is a existing that periodically reverses path and modifications its magnitude of the current over time. This current is the reverse of a direct present or “DC” which flows in only one particular direction. AC motors can give a comparatively productive way to produce mechanical energy from a straightforward electrical input signal.
Two sorts of AC motors contain: Synchronous: The reality that a synchronous motor rotates at the very same charge as the frequency of the mains current presents the motor its identify. A synchronous motor consists of a stator and a rotor. Synchronous motors have a wide assortment of applications. Induction: Induction motors are the most basic and strongest motors offered. These AC motors consist of two electrical components: a wound stator and rotor assembly. The existing required to change the rotor is created by the electromagnetic induction produced by the stator windings. Induction motors are one particular of the most generally used kinds of motors in the planet.

China best High Speed Motor Brushless Differential Motor 48V60V72V 1000W 1800W 2200W 3000W Brushless DC Motor for Electric Tricycle Mini Car Engine     with Good quality