Tag Archives: 24 gear motor

China Customized NEMA 23 BLDC DC Gear Geared Motor 24 48VDC Planetary Reduction Gearbox Integrated Driver Brushless DC Motor Power 10W Upto 800W with high quality

Product Description

 

Custom-made NEMA 23 BLDC DC Gear Geared Motor 24 48VDC Planetary Reduction Gearbox Built-in Driver Brushless DC Motor Energy 10W Upto 800W 

Item Description

Merchandise Name: Brushless DC Motor

Amount of Section: 3 Section

Amount of Poles: 4 Poles /8 Poles /10 Poles

Rated Voltage: 12v /24v /36v /48v /310v

Rated Velocity: 3000rpm /4000rpm /or customized

Rated Torque: Custom-made

Rated Current: Custom-made

Rated Power: 23w~2500W

Jkongmotor has a vast assortment of micro motor generation strains in the market, like Stepper Motor, DC Servo Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Planetary Gearbox and so on. By way of technological innovation and customization, we aid you develop excellent application techniques and supply versatile solutions for a variety of industrial automation situations.

57mm 36V Brushless DC Motor Parameters:

Specification Unit Model
JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Amount Of Phase Period 3
Variety Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m .055 .11 .22 .33 .forty four
Rated Present Amps one.2 two three.6 five.three 6.eight
Rated Energy W 23 forty six 92 138 184
Peak Torque N.m .sixteen .33 .66 one 1.32
Peak Present Amps three.5 6.8 eleven.5 15.five twenty.five
Again E.M.F V/Krpm seven.8 7.7 7.four 7.three seven.1
Torque Continuous N.m/A .074 .073 .07 .07 .068
Rotor Inertia g.cm2 30 seventy five 119 173 230
Body Duration mm 37 47 67 87 107
Fat Kg .33 .44 .seventy five 1 one.twenty five
Sensor Honeywell
Insulation Course B
Diploma of Protection IP30
Storage Temperature -twenty five~+70ºC
Working Temperature -15~+50ºC
Working Humidity 85% RH or beneath (no condensation)
Working Setting Outdoor (no immediate sunlight), no corrosive gasoline, no flammable gasoline, no oil mist, no dust
Altitude 1000 meters or considerably less

Planetary Gearbox Parameters:

56JXE300K
Ring material Steel
Bearing at output Ball bearings
Max. Radial (12mm from flange) 300N
Max. shaft axial load 200N
Radial play of shaft (in close proximity to to flange) ≤0.08mm
Axial enjoy of shaft ≤0.4mm
Backlash at no-load ≤2.5°
Shaft push match power, max 300N

 

Motor Shaft Pinion Specs
Module 1
No. of enamel twelve fifteen nine
Stress angle 20°
Gap diameter Φ6H7
Reduction ratio 1/4.25  1/15  1/18  1/23  1/52  1/61  1/72  1/96  1/121  1/220  1/260  1/307 one/3.6  1/13  1/43  1/154  1/187 one/5.33  1/28

 

Gearbox Technical specs:
Reduction ratio Precise reduction ratio Rated tolerance torque Max momentary tolerance torque Effectiveness L (mm) Weight (g)
1/3.6  1/4.25  1/5.33 1/3.6  1/4.25  1/5.33 3 N.m Max 9 N.m 90% 37.8±0.5 489
one/13  1/15  1/18  1/23  1/28 1/twelve.96  1/fifteen.30  1/18.06  1/22.67  1/28.forty four twelve N.m Max 36 N.m .eighty one forty nine.5±0.5 681
1/43  1/52  1/61  1/72  1/96  1/121 1/42.69  1/51.84  1/61.20  1/seventy two.25  1/ninety six.33  1/one hundred twenty.89 24 N.m Max 72 N.m 73% 60.8±0.five 871
1/154  1/187  1/220  1/260  1/307 one/153.69  1/186.62  1/220.32  1/260.10  1/307.06 thirty N.m Max 90 N.m .sixty six seventy one.9±0.5 1066
Input & output very same rotation course Motor Max. enter velocity: <6000rpm Operating temperature range: -15ºC ~ +80ºC

We assistance a lot of distinct Gearbox to customise, this sort of as Planetary Gearbox, Large Precision Planetary Gearbox, Worm gearbox, Eccentric Gearbox and so on. If you have any personalized requirements, get in touch with us right away!!!

 

Planetary Gearbox Kind:

 

42mm 24V Brushless DC Motor Parameters:

Specification Unit Model
JK42BLS01 JK42BLS02 JK42BLS03 JK42BLS04
Number Of Section Period 3
Quantity Of Poles Poles 8
Rated Voltage VDC 24      
Rated Pace Rpm 4000      
Rated Torque N.m .0625 .a hundred twenty five .185 .twenty five
Peak Recent Amps one.eight three.3 4.eight six.3
Rated Electricity W 26 52.five seventy seven.five one zero five
Peak Torque N.m .19 .38 .56 .seventy five
Peak Existing Amps 5.4 ten.6 fifteen.5 twenty
Back E.M.F V/Krpm four.1 4.two 4.three four.three
Torque Constant N.m/A .039 .04 .041 .041
Rotor Inertia g.cm2 24 forty eight 72 96
Physique Size mm
Excess weight Kg
Sensor Honeywell
Insulation Class B
Degree of Safety IP30
Storage Temperature -twenty five~+70ºC
Running Temperature -fifteen~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Surroundings Outdoor (no direct sunlight), no corrosive gasoline, no flammable gasoline, no oil mist, no dust
Altitude 1000 meters or significantly less

60mm 48V Brushless DC Motor Parameters:

Specification Unit Model
JK60BLS01 JK60BLS02 JK60BLS03 JK60BLS04
Amount Of Phase Phase 3
Variety Of Poles Poles 8
Rated Voltage VDC 48
Rated Pace Rpm 3000
Rated Torque N.m .3 .6 .nine 1.two
Rated Current Amps 2.8 five.2 7.5 nine.5
Rated Electrical power W 94 188 283 377
Peak Torque N.m .nine 1.8 two.7 3.six
Peak Current Amps 8.four fifteen.6 22.five 28.5
Back E.M.F V/Krpm 12.1 12.6 twelve.four 13.3
Torque Continuous N.m/A .116 .12 .118 .127
Rotor Inertia kg.cm2 .24 .forty eight .seventy two .96
Entire body Size mm seventy eight 99 120 141
Weight Kg .85 one.25 1.sixty five two.05
Sensor Honeywell
Insulation Course B
Diploma of Protection IP30
Storage Temperature -25~+70ºC
Working Temperature -15~+50ºC
Functioning Humidity 85% RH or underneath (no condensation)
Functioning Setting Outdoor (no direct daylight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or significantly less

80mm 48V BLDC Motor Parameters:

Specification Unit Model
JK80BLS01 JK80BLS02 JK80BLS03 JK80BLS04
Number Of Stage Stage 3
Variety Of Poles Poles 4
Rated Voltage VDC 48
Rated Pace Rpm 3000
Rated Torque N.m .35 .seven 1.05 1.four
Rated Present Amps three 5.five eight 10.5
Rated Energy W one hundred ten 220 330 440
Peak Torque N.m one.05 2.one three.15 4.2
Peak Recent Amps 9 16.five 24 31.5
Back again E.M.F V/Krpm thirteen.five 13.3 13.one thirteen
Torque Continuous N.m/A .thirteen .127 .126 .124
Rotor Inertia g.cm2 210 420 630 840
Physique Length mm 78 98 118 138
Bodyweight Kg 1.4 two 2.six three.2
Sensor Honeywell
Insulation Course B
Diploma of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -fifteen~+50ºC
Doing work Humidity 85% RH or beneath (no condensation)
Working Setting Outdoor (no direct sunlight), no corrosive gas, no flammable gasoline, no oil mist, no dust
Altitude 1000 meters or significantly less

86mm 48V Dc Brushless Motor Parameters:

Specification Unit Model
JK86BLS58 JK86BLS71 JK86BLS84 JK86BLS98 JK86BLS125
Number Of Period Phase 3
Amount Of Poles Poles 8
Rated Voltage VDC 48
Rated Pace Rpm 3000
Rated Torque N.m .35 .seven one.05 1.4 two.1
Rated Present Amps 3 six.three nine 11.5 18
Rated Energy W 110 220 330 440 660
Peak Torque N.m 1.05 2.one 3.fifteen 4.two 6.3
Peak Present Amps 9 19 27 35 fifty four
Again E.M.F V/Krpm 13.seven 13 thirteen.5 13.seven thirteen.5
Torque Continuous N.m/A .thirteen .twelve .13 .thirteen .13
Rotor Inertia g.cm2 400 800 1200 1600 2400
Entire body Length mm seventy one eighty four.five ninety eight 111.five 138.5
Excess weight Kg one.5 1.nine 2.3 2.seven 4
Sensor Honeywell
Insulation Course B
Diploma of Defense IP30
Storage Temperature -twenty five~+70ºC
Functioning Temperature -15~+50ºC
Functioning Humidity 85% RH or underneath (no condensation)
Working Surroundings Outdoor (no immediate daylight), no corrosive fuel, no flammable gas, no oil mist, no dust
Altitude 1000 meters or considerably less

110mm 310V Brushless Motor Parameters:

Specification Unit Model
JK110BLS050 JK110BLS75 JK110BLS100 JK110BLS125
Quantity Of Stage Stage 3
Number Of Poles Poles 8
Rated Voltage VDC 310
Rated Velocity Rpm 3400
Rated Torque N.m 2.38 3.three 5 6.six
Rated Existing Amps .five .6 .8 one
Rated Power KW .seventy five 1.03 one.57 two.07
Back E.M.F V/Krpm ninety one.one 91.one ninety one.1 88.six
Torque Consistent N.m/A .87 .87 .87 .845
Entire body Duration mm one hundred thirty one hundred fifty five a hundred and eighty 205
Sensor Honeywell
Insulation Class H

Stepping Motor Customized

 

In depth Photographs

                                       Cnc Motor Kits                                                                                                   Brushless dc Motor with Brake

            Brushless Dc Motor with Planetary Gearbox                                                Bldc Motor with Encoder

 

                  Brushless Dc Motor                                                    Brushed Dc Motor                                                     Hybrid Stepper Motor

Firm Profile

HangZhou CZPT Co., Ltd was a high technological innovation sector zone in HangZhou, china. Our merchandise employed in many sorts of devices, this sort of as 3d printer CNC device, health care tools, weaving printing equipments and so on.
JKONGMOTOR warmly welcome ‘OEM’ & ‘ODM’ cooperations and other businesses to build lengthy-time period cooperation with us.
Business spirit of sincere and good status, gained the recognition and support of the wide masses of customers, at the same time with the domestic and international suppliers close local community of passions, the company entered the phase of stage of benign growth, laying a sound basis for the strategic purpose of recognizing only genuinely the sustainable improvement of the firm.

Equipments Display:
Production Circulation:
Package deal:
Certification:

1. who are we?

We are primarily based in ZheJiang , China, commence from 2011,offer to Domestic Industry(26.00%),Western Europe(20.00%),North
The united states(20.00%),Northern Europe(10.00%),Eastern Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South The usa(2.00%). There are total about 51-100 folks in our business office.

2. how can we assure quality?

We are dependent in ZheJiang , China, start off from 2011,offer to Domestic Market(26.00%),Western Europe(20.00%),North
America(20.00%),Northern Europe(10.00%),Japanese Europe(7.00%),Africa(5.00%),Southeast Asia(5.00%),Mid East(5.00%),South The us(2.00%). There are complete about fifty one-100 men and women in our business office.

three.what can you buy from us?

Usually a pre-manufacturing sample ahead of mass generation
Usually last Inspection before shipment

4. why need to you buy from us not from other suppliers?

Skilled 1-to-1 motor personalized . The world’s huge enterprise of decision for substantial high quality suppliers . ISO9001:2008 top quality management method certification, via the CE, ROHS certification.

5. what solutions can we provide?

Recognized Delivery Conditions: FOB,CFR,CIF,EXW,CIP,FCA,CPT,DDP,DDU,Categorical Supply,DAF,DES
Recognized Payment Currency:USD,EUR,CAD,HKD,GBP,CNY
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow
Language Spoken:English,Chinese


/ Piece
| 		10 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.

To be negotiated

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Excitation Mode: Compound

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

need to confirm the cost with seller

###

Customization:
Available

|

###

Specification Unit Model
JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
Rated Current Amps 1.2 2 3.6 5.3 6.8
Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm2 30 75 119 173 230
Body Length mm 37 47 67 87 107
Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

56JXE300K
Ring material Metal
Bearing at output Ball bearings
Max. Radial (12mm from flange) 300N
Max. shaft axial load 200N
Radial play of shaft (near to flange) ≤0.08mm
Axial play of shaft ≤0.4mm
Backlash at no-load ≤2.5°
Shaft press fit force, max 300N

###

Motor Shaft Pinion Specifications
Module 1
No. of teeth 12 15 9
Pressure angle 20°
Hole diameter Φ6H7
Reduction ratio 1/4.25  1/15  1/18  1/23  1/52  1/61  1/72  1/96  1/121  1/220  1/260  1/307 1/3.6  1/13  1/43  1/154  1/187 1/5.33  1/28

###

Gearbox Specifications:
Reduction ratio Exact reduction ratio Rated tolerance torque Max momentary tolerance torque Efficiency L (mm) Weight (g)
1/3.6  1/4.25  1/5.33 1/3.6  1/4.25  1/5.33 3 N.m Max 9 N.m 90% 37.8±0.5 489
1/13  1/15  1/18  1/23  1/28 1/12.96  1/15.30  1/18.06  1/22.67  1/28.44 12 N.m Max 36 N.m 0.81 49.5±0.5 681
1/43  1/52  1/61  1/72  1/96  1/121 1/42.69  1/51.84  1/61.20  1/72.25  1/96.33  1/120.89 24 N.m Max 72 N.m 73% 60.8±0.5 871
1/154  1/187  1/220  1/260  1/307 1/153.69  1/186.62  1/220.32  1/260.10  1/307.06 30 N.m Max 90 N.m 0.66 71.9±0.5 1066
Input & output same rotation direction; Motor Max. input speed: <6000rpm; Operating temperature range: -15ºC ~ +80ºC

###

Specification Unit Model
JK42BLS01 JK42BLS02 JK42BLS03 JK42BLS04
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 24      
Rated Speed Rpm 4000      
Rated Torque N.m 0.0625 0.125 0.185 0.25
Peak Current Amps 1.8 3.3 4.8 6.3
Rated Power W 26 52.5 77.5 105
Peak Torque N.m 0.19 0.38 0.56 0.75
Peak Current Amps 5.4 10.6 15.5 20
Back E.M.F V/Krpm 4.1 4.2 4.3 4.3
Torque Constant N.m/A 0.039 0.04 0.041 0.041
Rotor Inertia g.cm2 24 48 72 96
Body Length mm
Weight Kg
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

Specification Unit Model
JK60BLS01 JK60BLS02 JK60BLS03 JK60BLS04
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.3 0.6 0.9 1.2
Rated Current Amps 2.8 5.2 7.5 9.5
Rated Power W 94 188 283 377
Peak Torque N.m 0.9 1.8 2.7 3.6
Peak Current Amps 8.4 15.6 22.5 28.5
Back E.M.F V/Krpm 12.1 12.6 12.4 13.3
Torque Constant N.m/A 0.116 0.12 0.118 0.127
Rotor Inertia kg.cm2 0.24 0.48 0.72 0.96
Body Length mm 78 99 120 141
Weight Kg 0.85 1.25 1.65 2.05
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

Specification Unit Model
JK80BLS01 JK80BLS02 JK80BLS03 JK80BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.35 0.7 1.05 1.4
Rated Current Amps 3 5.5 8 10.5
Rated Power W 110 220 330 440
Peak Torque N.m 1.05 2.1 3.15 4.2
Peak Current Amps 9 16.5 24 31.5
Back E.M.F V/Krpm 13.5 13.3 13.1 13
Torque Constant N.m/A 0.13 0.127 0.126 0.124
Rotor Inertia g.cm2 210 420 630 840
Body Length mm 78 98 118 138
Weight Kg 1.4 2 2.6 3.2
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

Specification Unit Model
JK86BLS58 JK86BLS71 JK86BLS84 JK86BLS98 JK86BLS125
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.35 0.7 1.05 1.4 2.1
Rated Current Amps 3 6.3 9 11.5 18
Rated Power W 110 220 330 440 660
Peak Torque N.m 1.05 2.1 3.15 4.2 6.3
Peak Current Amps 9 19 27 35 54
Back E.M.F V/Krpm 13.7 13 13.5 13.7 13.5
Torque Constant N.m/A 0.13 0.12 0.13 0.13 0.13
Rotor Inertia g.cm2 400 800 1200 1600 2400
Body Length mm 71 84.5 98 111.5 138.5
Weight Kg 1.5 1.9 2.3 2.7 4
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

Specification Unit Model
JK110BLS050 JK110BLS75 JK110BLS100 JK110BLS125
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 310
Rated Speed Rpm 3400
Rated Torque N.m 2.38 3.3 5 6.6
Rated Current Amps 0.5 0.6 0.8 1
Rated Power KW 0.75 1.03 1.57 2.07
Back E.M.F V/Krpm 91.1 91.1 91.1 88.6
Torque Constant N.m/A 0.87 0.87 0.87 0.845
Body Length mm 130 155 180 205
Sensor Honeywell
Insulation Class H

/ Piece
| 		10 Pieces

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.

To be negotiated

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: High Speed
Excitation Mode: Compound

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

need to confirm the cost with seller

###

Customization:
Available

|

###

Specification Unit Model
JK57BLS005 JK57BLS01 JK57BLS02 JK57BLS03 JK57BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 36
Rated Speed Rpm 4000
Rated Torque N.m 0.055 0.11 0.22 0.33 0.44
Rated Current Amps 1.2 2 3.6 5.3 6.8
Rated Power W 23 46 92 138 184
Peak Torque N.m 0.16 0.33 0.66 1 1.32
Peak Current Amps 3.5 6.8 11.5 15.5 20.5
Back E.M.F V/Krpm 7.8 7.7 7.4 7.3 7.1
Torque Constant N.m/A 0.074 0.073 0.07 0.07 0.068
Rotor Inertia g.cm2 30 75 119 173 230
Body Length mm 37 47 67 87 107
Weight Kg 0.33 0.44 0.75 1 1.25
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

56JXE300K
Ring material Metal
Bearing at output Ball bearings
Max. Radial (12mm from flange) 300N
Max. shaft axial load 200N
Radial play of shaft (near to flange) ≤0.08mm
Axial play of shaft ≤0.4mm
Backlash at no-load ≤2.5°
Shaft press fit force, max 300N

###

Motor Shaft Pinion Specifications
Module 1
No. of teeth 12 15 9
Pressure angle 20°
Hole diameter Φ6H7
Reduction ratio 1/4.25  1/15  1/18  1/23  1/52  1/61  1/72  1/96  1/121  1/220  1/260  1/307 1/3.6  1/13  1/43  1/154  1/187 1/5.33  1/28

###

Gearbox Specifications:
Reduction ratio Exact reduction ratio Rated tolerance torque Max momentary tolerance torque Efficiency L (mm) Weight (g)
1/3.6  1/4.25  1/5.33 1/3.6  1/4.25  1/5.33 3 N.m Max 9 N.m 90% 37.8±0.5 489
1/13  1/15  1/18  1/23  1/28 1/12.96  1/15.30  1/18.06  1/22.67  1/28.44 12 N.m Max 36 N.m 0.81 49.5±0.5 681
1/43  1/52  1/61  1/72  1/96  1/121 1/42.69  1/51.84  1/61.20  1/72.25  1/96.33  1/120.89 24 N.m Max 72 N.m 73% 60.8±0.5 871
1/154  1/187  1/220  1/260  1/307 1/153.69  1/186.62  1/220.32  1/260.10  1/307.06 30 N.m Max 90 N.m 0.66 71.9±0.5 1066
Input & output same rotation direction; Motor Max. input speed: <6000rpm; Operating temperature range: -15ºC ~ +80ºC

###

Specification Unit Model
JK42BLS01 JK42BLS02 JK42BLS03 JK42BLS04
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 24      
Rated Speed Rpm 4000      
Rated Torque N.m 0.0625 0.125 0.185 0.25
Peak Current Amps 1.8 3.3 4.8 6.3
Rated Power W 26 52.5 77.5 105
Peak Torque N.m 0.19 0.38 0.56 0.75
Peak Current Amps 5.4 10.6 15.5 20
Back E.M.F V/Krpm 4.1 4.2 4.3 4.3
Torque Constant N.m/A 0.039 0.04 0.041 0.041
Rotor Inertia g.cm2 24 48 72 96
Body Length mm
Weight Kg
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

Specification Unit Model
JK60BLS01 JK60BLS02 JK60BLS03 JK60BLS04
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.3 0.6 0.9 1.2
Rated Current Amps 2.8 5.2 7.5 9.5
Rated Power W 94 188 283 377
Peak Torque N.m 0.9 1.8 2.7 3.6
Peak Current Amps 8.4 15.6 22.5 28.5
Back E.M.F V/Krpm 12.1 12.6 12.4 13.3
Torque Constant N.m/A 0.116 0.12 0.118 0.127
Rotor Inertia kg.cm2 0.24 0.48 0.72 0.96
Body Length mm 78 99 120 141
Weight Kg 0.85 1.25 1.65 2.05
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

Specification Unit Model
JK80BLS01 JK80BLS02 JK80BLS03 JK80BLS04
Number Of Phase Phase 3
Number Of Poles Poles 4
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.35 0.7 1.05 1.4
Rated Current Amps 3 5.5 8 10.5
Rated Power W 110 220 330 440
Peak Torque N.m 1.05 2.1 3.15 4.2
Peak Current Amps 9 16.5 24 31.5
Back E.M.F V/Krpm 13.5 13.3 13.1 13
Torque Constant N.m/A 0.13 0.127 0.126 0.124
Rotor Inertia g.cm2 210 420 630 840
Body Length mm 78 98 118 138
Weight Kg 1.4 2 2.6 3.2
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

Specification Unit Model
JK86BLS58 JK86BLS71 JK86BLS84 JK86BLS98 JK86BLS125
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 48
Rated Speed Rpm 3000
Rated Torque N.m 0.35 0.7 1.05 1.4 2.1
Rated Current Amps 3 6.3 9 11.5 18
Rated Power W 110 220 330 440 660
Peak Torque N.m 1.05 2.1 3.15 4.2 6.3
Peak Current Amps 9 19 27 35 54
Back E.M.F V/Krpm 13.7 13 13.5 13.7 13.5
Torque Constant N.m/A 0.13 0.12 0.13 0.13 0.13
Rotor Inertia g.cm2 400 800 1200 1600 2400
Body Length mm 71 84.5 98 111.5 138.5
Weight Kg 1.5 1.9 2.3 2.7 4
Sensor Honeywell
Insulation Class B
Degree of Protection IP30
Storage Temperature -25~+70ºC
Operating Temperature -15~+50ºC
Working Humidity 85% RH or below (no condensation)
Working Environment Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust
Altitude 1000 meters or less

###

Specification Unit Model
JK110BLS050 JK110BLS75 JK110BLS100 JK110BLS125
Number Of Phase Phase 3
Number Of Poles Poles 8
Rated Voltage VDC 310
Rated Speed Rpm 3400
Rated Torque N.m 2.38 3.3 5 6.6
Rated Current Amps 0.5 0.6 0.8 1
Rated Power KW 0.75 1.03 1.57 2.07
Back E.M.F V/Krpm 91.1 91.1 91.1 88.6
Torque Constant N.m/A 0.87 0.87 0.87 0.845
Body Length mm 130 155 180 205
Sensor Honeywell
Insulation Class H

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China Customized NEMA 23 BLDC DC Gear Geared Motor 24 48VDC Planetary Reduction Gearbox Integrated Driver Brushless DC Motor Power 10W Upto 800W with high qualityChina Customized NEMA 23 BLDC DC Gear Geared Motor 24 48VDC Planetary Reduction Gearbox Integrated Driver Brushless DC Motor Power 10W Upto 800W with high quality
editor by CX 2023-03-27

China Bringsmart JGB37-3157 37mm Diameter gear dc motor High Torque motor 12v dc 1270RPM 24 volt motor With Reduction Gear motor driver

Warranty: Other
Model Quantity: JGB37-3157
Use: BOAT, Automobile, Electric Bicycle, Fan, House Appliance, Beauty instrument, Smart Home
Sort: Equipment MOTOR
Torque: .6-35kg.cm
Development: Everlasting Magnet
Commutation: Brush
Protect Feature: Absolutely Enclosed
Speed(RPM): 4-1270RPM
Steady Present(A): less than .3-1A
Effectiveness: IE two
Certification: CCC, ce, RoHS
Packaging Specifics: Interior Packaging: High Quality Bubble bagsOutside packing: Stable Kraft Cartons
Port: HangZhou

Brand TitleBringSmart
Main ItemDC Motor, AC Motor, DC Linear Actuator look at much more
OEMAccepted
Delivery TimeWithin fifteen days
The motor varieties are various, send us your technological requirement, We will advocate suitable product in accordance your request, anyquestion, You should click on on this hyperlink to speak to us. Specification Motor Overall performance Curves Contact us if you need to have information efficiency curves information,You should click on this link to make contact with us. Merchandise show & Drawing Customized Service We can customise various shafts, terminal , 750W BLDC Tricycle 48V Volt Electric Rickshaw Brushless DC Motor gearboxes, code discs, and so forth. according to your needs. Remember to ship an inquiry or TM to tell us. Motor Tailored Specification, Make sure you click on on this link to contact us. Software Organization Profile HangZhou BRINGSMART Smart TEC.CO.,LTD. are 1 of the major manufacturers and exportersin motor, linear actuator industry with eleven years encounters. Our relentlesscommitment to engaging in products innovation, recruiting knowledgeable andself enthusiastic personnel, and aims to serving the wants of the customers are essential essential factors all contributed to our achievement nowadays. Bringsmart has set up a fully state of artworking method for CNC, R&D, and Q.C to guarantee each and every and every single of our product meets with the highest quality standard just before transport it to the clients. With 11 a long time knowledge, our R &D team is able to create OEM/ODM goods in accordance to buyers needs. Bringsmart advocates the concept of “Bright Long term with Total Dedication” We try to apply sophisticated intelligent systems, to increase electricity effectiveness and lifespan of our goods. We support and advertise power conserving programs and environmental protectionglobally. Certifications Searching Ahead To Your Opinions,Please click on on this url to speak to us. Exceptional top quality, New promotion sizzling design shaft collar lowes plastic shaft collar circle shaft with skd-11 better price tag, good service, and on time shipping. Contact Us FAQ Q1: why nevertheless not get my buy?A1: someday, some cargo would be marginally delay on street. Remember to speak to with us very first, we will offer you a excellent resolution for you. Q2: what is the material of the gear?A2: The motor gears are made of metal. If you want other supplies, you can get in touch with us. Q3: what is the torque imply?A3: torque is the fat that the motor can load at a particular voltage and pace. If the motor you bought is 12v 12rpm, its corresponding torque is 70kg.cm. This indicates that when the motor is at 12v and 12rpm, it can load 70kg objects with a diameter of 1cm. If the iameter of the load is 10cm, then the rated torque is 7kg. Remember to do not exceed the rated load for the duration of the use of the motor, normally the gear is susceptible to wear and tear. This fall: how to adjust rotation route?A4: make sure you alter wiring polarity to modify rotation course. Q5: how to modify velocity?A5: you can acquire our beneath velocity controller, to adjust pace from -10rpm. Q6: what do “self locking” imply?A6: It is the feature of this motor, when power off, this motor also has lock torque, can not simple to transfer by other power. It can be utilized for some particular function. These kinds of as Anti-theft sliding doorways. Q7: what happens when a voltage of 18V is connected to a 12V motor or an 18V motor?A7: The 12V motor link 18V voltage will be damaged, and the 24V motor relationship 18V voltage will impact his velocity and torque, and will not even operate. If you have any question and difficulty in employing, 3D Printer One Split Collar Transmission Shaft Connector Rigid Coupling please contact us first. We will consider our best to take care of the issue.

How to Select a Gear Motor

A gearmotor is an electrical machine that transfers energy from one place to another. There are many types of gearmotors. This article will discuss the types of gearmotors, including Angular geared motors, Planetary gearboxes, Hydraulic gear motors, and Croise motors. In addition to its uses, gearmotors have many different characteristics. In addition, each type has distinct advantages and disadvantages. Listed below are a few tips on selecting a gearmotor.

Angular geared motors

Angular geared motors are the optimum drive element for applications where torques, forces, and motions need to be transferred at an angle. Compared to other types of geared motors, these have few moving parts, a compact design, and a long life. Angular geared motors are also highly efficient in travel drive applications. In addition to their durability, they have a low maintenance requirement and are highly corrosion-resistant.
Helical worm geared motors are a low-cost solution for drives that employ angular geared motors. They combine a worm gear stage and helical input stage to offer higher efficiency than pure worm geared motors. This drive solution is highly reliable and noise-free. Angular geared motors are often used in applications where noise is an issue, and helical worm geared motors are particularly quiet.
The gear ratio of an angular geared motor depends on the ratio between its input and output shaft. A high-quality helical geared motor has a relatively low mechanical noise level, and can be installed in almost any space. The torque of a helical geared motor can be measured by using frequency measurement equipment. The energy efficiency of angular geared motors is one of the most important factors when choosing a motor. Its symmetrical arrangement also allows it to operate in low-speed environments.
When selecting the right angular geared motor, it is important to keep in mind that increased torque will lead to poor output performance. Once a gear motor reaches its stall torque, it will no longer function properly. This makes it important to consult a performance curve to choose the appropriate motor. Most DC motor manufacturers are more than happy to provide these to customers upon request. Angular geared motors are more expensive than conventional worm gear motors.
Motor

Planetary gearboxes

Planetary gearboxes are used in industrial machinery to generate higher torque and power density. There are three main types of planetary gearboxes: double stage, triple stage, and multistage. The central sun gear transfers torque to a group of planetary gears, while the outer ring and spindle provide drive to the motor. The design of planetary gearboxes delivers up to 97% of the power input.
The compact size of planetary gears results in excellent heat dissipation. In some applications, lubrication is necessary to improve durability. Nevertheless, if you are looking for high speed transmission, you should consider the additional features, such as low noise, corrosion resistance, and construction. Some constructors are better than others. Some are quick to respond, while others are unable to ship their products in a timely fashion.
The main benefit of a planetary gearbox is its compact design. Its lightweight design makes it easy to install, and the efficiency of planetary gearboxes is up to 0.98%. Another benefit of planetary gearboxes is their high torque capacity. These gearboxes are also able to work in applications with limited space. Most modern automatic transmissions in the automotive industry use planetary gears.
In addition to being low in cost, planetary gearboxes are a great choice for many applications. Neugart offers both compact and right angle versions. The right angle design offers a high power-to-weight ratio, making it ideal for applications where torque is needed to be transmitted in reverse mode. So if you’re looking for an efficient way to move heavy machinery around, planetary gearboxes can be a great choice.
Another advantage of planetary gearboxes is their ability to be easily and rapidly changed from one application to another. Since planetary gears are designed to be flexible, you don’t have to buy new ones if you need to change gear ratios. You can also use planetary gears in different industries and save on safety stock by sharing common parts. These gears are able to withstand high shock loads and demanding conditions.
Motor

Hydraulic gear motors

Hydraulic gear motors are driven by oil that is pumped into a gear box and causes the gears to rotate. This method of energy production is quiet and inexpensive. The main drawbacks of hydraulic gear motors are that they are noisy and inefficient at low speeds. The other two types of hydraulic motors are piston and vane-type hydraulic motors. The following are some common benefits of hydraulic gear motors.
A hydraulic gear motor is composed of two gears – a driven gear and an idler. The driven gear is attached to the output shaft via a key. High-pressure oil flows into the housing between the gear tips and the motor housing, and the oil then exits through an outlet port. Unlike a conventional gear motor, the gears mesh to prevent the oil from flowing backward. As a result, they are an excellent choice for agricultural and industrial applications.
The most common hydraulic gear motors feature a gerotor and a drive gear. These gears mesh with a larger gear to produce rotation. There are also three basic variations of gear motors: roller-gerotor, gerotor, and differential. The latter produces higher torque and less friction than the previous two. These differences make it difficult to choose which type is the best for your needs. A high-performance gear motor will last longer than an ordinary one.
Radial piston hydraulic motors operate in the opposite direction to the reciprocating shaft of an electric gearmotor. They have nine pistons arranged around a common center line. Fluid pressure causes the pistons to reciprocate, and when they are stationary, the pistons push the fluid out and move back in. Because of the high pressure created by the fluid, they can rotate at speeds up to 25,000RPM. In addition, hydraulic gear motors are highly efficient, allowing them to be used in a wide range of industrial and commercial applications.
Hydraulic gear motors complement hydraulic pumps and motors. They are also available in reversible models. To choose the right hydraulic motor for your project, take time to gather all the necessary information about the installation process. Some types require specialized expertise or complicated installation. Also, there are some differences between closed and open-loop hydraulic motors. Make sure to discuss the options with a professional before you make a decision.
Motor

Croise motors

There are many advantages to choosing a Croise gear motor. It is highly compact, with less weight and space than standard motors. Its right-angle shaft and worm gear provide smooth, quiet operation. A silent-type brake ensures no metallic sound during operation. It also offers excellent positioning accuracy and shock resistance. This is why this motor is ideal for high-frequency applications. Let’s take a closer look.
A properly matched gearmotor will provide maximum torque output in a specified period. Its maximum developing torque is typically the rated output torque. A one-twelfth-horsepower (1/8 horsepower) motor can meet torque requirements of six inch-pounds, without exceeding its breakdown rating. This lower-cost unit allows for production variations and allows the customer to use a less powerful motor. Croise gear motors are available in a variety of styles.

China Bringsmart JGB37-3157 37mm Diameter gear dc motor High Torque motor 12v dc 1270RPM 24 volt motor With Reduction Gear motor driver China Bringsmart JGB37-3157 37mm Diameter gear dc motor High Torque motor 12v dc 1270RPM 24 volt motor With Reduction Gear motor driver
editor by czh 2023-02-17

China China Manufacturer High Quality 12V 24 Volt Micro BLDC Motors / Brushless Planetary Gear Motors motor electric

Item Description

China Producer Higher Good quality 12V 24 volt micro bldc motors / brushless planetary gear motors

Specification

Voltage: 12V- 310V
Electricity:  15W-400W
Rated Speed: 2000-3000RPM
Output Velocity: Personalized
Torque: Tailored
Diameter of gearbox: sixty-104cm
 

Thorough Photographs


 

Greensky Mechanical Items include:

1. AC (equipment) motor
2. DC & BLDC (equipment) motor
3. Worm gearbox
four. Helical gearbox
five. Coreless motor
6. External rotor motor
seven. Motor controller
eight. Tailored motor

If you have projects that want motors and equipment boxes, remember to freely speak to me.

Business Overview

  

About Greensky Mechanical

  • Background: Greensky Mechanical is a motor manufacturer of Greensky power organization Restricted. The brand name Greensky Mechanical was started in 2012 with investing in a fifteen yr old motor factory in ZHangZhoug Province. Greensky Power introduced new management concept to the new joint firm and enhance the top quality of the motors as Greensky Energy usually gives steady and excellent quality and support to the society. The Positioning of the brand name is medium & high good quality amount. Our customers are primarily in Europe. We help save price by rising the performance of production and supply. 
  • Industry: Greensky has clients in thirty distinct countries. Germany, Austria, Japan, Usa and Center-East are our principal industry .
  • Mission:  “After and without end” is our purpose to provide customers in the world. After we do business with client, we will do company without end.

The rewards of doing work with us are:

one.  Convenience. We can provide all types of motor & gearbox by producing and out sourcing.
two.  High Quality. All products are <1% defect rate with ≥ 1 calendar year promise.
3.  Low Expense. We critically reduce cost on material, processing, assembling, packing and shipping and delivery.
four.  Flexible support. MOQ beneath 10pcs & customize obtainable & urgent purchase remedy.
5.  Fast reaction. Our theory is reaction in 15 minutes and provide solution in 24 several hours.

We hope you get pleasure from cooperating with us.
 

To Be Negotiated 10 Pieces
(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Constant Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Closed Type
Number of Poles: 4

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

To Be Negotiated 10 Pieces
(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Constant Speed
Excitation Mode: Excited
Function: Control, Driving
Casing Protection: Closed Type
Number of Poles: 4

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|

Customized Request

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Motor

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China China Manufacturer High Quality 12V 24 Volt Micro BLDC Motors / Brushless Planetary Gear Motors motor electric China China Manufacturer High Quality 12V 24 Volt Micro BLDC Motors / Brushless Planetary Gear Motors motor electric
editor by czh 2023-01-25