The UCP pillow block is composed of a bearing insert with a spherical outer diameter in a 2 bolt solid iron housing. The bearing is normally fastened to the shaft by implies of two established screws in the extended portion of the internal ring.
Product # |
Substitute P/N |
(d) Shaft Diameter |
(H) Dimension |
(A) Dimension |
(E) Dimension |
(B) Dimension |
(S2) Dimension |
(Sone) Dimension |
Bolt Employed |
|---|---|---|---|---|---|---|---|---|---|
| NP12MM | UCP 201 | N/A | 1-three/sixteen in | 4 7/eight in | three-5/eight in | 1.4375 in | 3/4 in | 7/16 in | three/eight in |
| NP8 | UCP 201-eight | .five in | one-three/16 in | 4 seven/8 in | 3-five/eight in | 1.4375 in | 3/four in | seven/16 in | 3/8 in |
| NP15MM | UCP 202 | N/A | 1-three/16 in | four seven/8 in | three-five/eight in | 1.4375 in | 3/4 in | 7/sixteen in | 3/8 in |
| NP10 | UCP 202-10 | .625 in | one-three/16 in | four 7/8 in | three-5/8 in | 1.4375 in | three/4 in | seven/16 in | 3/8 in |
| NP17MM | UCP 203 | N/A | 1-three/16 in | 4 7/8 in | 3-5/8 in | 1.4375 in | 3/4 in | seven/16 in | 3/8 in |
| NP12 | UCP UCP 204-12 | .seventy five in | 1-five/sixteen in | 5 in | 3-3/four in | one.5000 in | 11/16 in | seven/16 in | 3/8 in |
| NP20MM | UCP 204 | N/A | 1-five/sixteen in | five in | three-3/4 in | 1.5000 in | 11/sixteen in | seven/16 in | three/8 in |
| NP14 | UCP 205-14 | .875 in | 1-7/16 in | five-1/2 in | 4-one/eight in | 1.5000 in | 11/16 in | 1/two in | three/8 in |
| NP15 | UCP 205-15 | .9375 in | 1-7/16 in | five-one/2 in | four-1/8 in | 1.5000 in | 11/sixteen in | 1/two in | three/8 in |
| NP25MM | UCP 205 | N/A | 1-seven/16 in | 5-one/two in | four-1/8 in | 1.5000 in | 11/16 in | 1/two in | 3/8 in |
| NP16 | UCP 205-16 | one in | 1-seven/16 in | five-one/2 in | 4-one/eight in | one.5000 in | 11/sixteen in | 1/two in | 3/eight in |
| NP17 | UCP 206-seventeen | one.0625 in | one-five/eight in1-11/16 in | six-five/16 in | four-three/4 in | 1.7500 in | thirteen/sixteen in | 9/16 in | one/two in |
| NP18 | UCP 206-eighteen | 1.a hundred twenty five in | 1-five/eight in1-eleven/sixteen in | 6-five/16 in | four-3/4 in | one.7500 in | thirteen/sixteen in | nine/16 in | one/2 in |
| NP30MM | UCP 206 | N/A | one-five/eight in1-11/sixteen in | 6-5/16 in | 4-3/four in | one.7500 in | thirteen/sixteen in | nine/16 in | one/2 in |
| NP19 | UCP 206-19 | one.1875 in | one-5/eight in1-11/sixteen in | six-five/sixteen in | 4-three/4 in | one.7500 in | 13/16 in | 9/16 in | one/two in |
| NP20S | UCP 206-twenty | 1.twenty five in | 1-five/8 in1-11/sixteen in | 6-five/16 in | 4-3/4 in | 1.7500 in | thirteen/sixteen in | 9/sixteen in | 1/two in |
| NP20 | UCP 207-20 | one.25 in | one-7/eight in | six-seventeen/32 in | 5 in | one-29/32 in | seven/8 in | nine/sixteen in | one/2 in |
| NP21 | UCP 207-21 | 1.3125 in | one-seven/eight in | 6-seventeen/32 in | five in | one-29/32 in | seven/eight in | nine/16 in | 1/2 in |
| NP22 | UCP 207-22 | 1.375 in | one-7/8 in | six-17/32 in | five in | 1-29/32 in | seven/eight in | 9/16 in | 1/two in |
| NP35MM | UCP 207 | N/A | 1-7/8 in | six-seventeen/32 in | five in | one-29/32 in | 7/8 in | nine/sixteen in | 1/2 in |
| NP23 | UCP 207-23 | one.4375 in | 1-7/8 in | six-seventeen/32 in | five in | one-29/32 in | 7/8 in | 9/16 in | one/two in |
| NP24 | UCP 208-24 | one.5 in | one-15/16 in | 7-1/8 in | five-7/sixteen in | 2.0000 in | seven/8 in | 9/sixteen in | one/2 in |
| NP25 | UCP 208-twenty five | 1.5625 in | one-fifteen/16 in | seven-1/8 in | five-7/sixteen in | two.0000 in | 7/8 in | nine/16 in | 1/2 in |
| NP40MM | UCP 208 | N/A | 1-fifteen/sixteen in | 7-one/eight in | 5-7/16 in | 2.0000 in | seven/8 in | 9/sixteen in | 1/2 in |
| NP26 | UCP 209-26 | one 5/eight in | 2-1/eight in | 7-one/2 in | 5-three/4 in | 2.1250 in | thirteen/sixteen in | 19/32 in | one/2 in |
| NP27 | UCP 209-27 | one 11/16 in | two-1/eight in | 7-1/two in | five-three/four in | two.1250 in | 13/16 in | 19/32 in | one/2 in |
| NP28 | UCP 209-28 | one 3/4 in | 2-one/8 in | 7-1/two in | five-three/four in | two.1250 in | thirteen/sixteen in | 19/32 in | 1/2 in |
| NP45MM | UCP 209 | N/A | 2-one/8 in | 7-one/two in | five-three/4 in | two.1250 in | thirteen/16 in | 19/32 in | one/2 in |
| NP30 | UCP 210-30 | one 7/8 in | 2-one/4 in | eight in | 6-1/four in | two.2500 in | 15/sixteen in | 23/32 in | five/8 in |
| NP31 | UCP 210-31 | one fifteen/16 in | two-1/four in | eight in | 6-1/four in | two.2500 in | fifteen/16 in | 23/32 in | five/8 in |
| NP50MM | UCP 210 | N/A | 2-one/4 in | eight in | six-one/four in | 2.2500 in | fifteen/16 in | 23/32 in | five/8 in |
| NP32S | UCP 210-32 | 2 in | two-1/four in | 8 in | 6-one/4 in | 2.2500 in | fifteen/sixteen in | 23/32 in | five/eight in |
| NP32 | UCP 211 32 | 2 in | two-1/2 in | 8-five/eight in | 6-seven/8 in | 2.3750 in | fifteen/sixteen in | 23/32 in | 5/8 in |
| NP34 | UCP 211-34 | 2 one/8 in | 2-1/2 in | eight-5/8 in | six-seven/8 in | two.3750 in | fifteen/sixteen in | 23/32 in | five/eight in |
| NP55MM | UCP 211 | N/A | two-1/2 in | eight-five/8 in | six-seven/8 in | two.3750 in | fifteen/16 in | 23/32 in | 5/8 in |
| NP35 | UCP 211-35 | 2 3/16 in | two-one/two in | 8-five/eight in | 6-seven/eight in | two.3750 in | 15/16 in | 23/32 in | 5/8 in |
| NP36 | UCP 212-36 | two 1/four in | 2-three/four in | nine-seventeen/32 in | seven-11/32 in | 2.5000 in | 1 in | twenty five/32 in | five/eight in |
| NP60MM | UCP 212 | N/A | 2-three/four in | nine-seventeen/32 in | 7-11/32 in | 2.5000 in | one in | twenty five/32 in | 5/eight in |
| NP38 | UCP 212-38 | 2.375 in | 2-3/four in | nine-17/32 in | seven-11/32 in | 2.5000 in | 1 in | twenty five/32 in | 5/eight in |
| NP39 | UCP 212-39 | 2 seven/16 in | 2-three/four in | 9-seventeen/32 in | seven-11/32 in | 2.5000 in | 1 in | 25/32 in | five/8 in |
| NP40 | UCP 213-40 | 2 1/2 in | three in | 10-three/4 in | 8-1/8 in | 2.5000 in | one-three/sixteen in | 13/16 in | 5/8 in |
| NP65MM | UCP 213 | N/A | 3 in | 10-3/4 in | 8-1/8 in | two.5000 in | one-three/sixteen in | 13/16 in | five/8 in |
| NP43 | UCP 214-43 | two eleven/sixteen in | three in | 10-3/4 in | eight-one/eight in | 2.5000 in | one-13/sixteen in | 13/sixteen in | 5/8 in |
| NP44 | UCP 214-44 | two three/4 in | three in | 10-3/4 in | eight-1/eight in | 2.5000 in | one-13/sixteen in | 13/sixteen in | 5/eight in |
| NP70MM | UCP 214 | N/A | three in | 10-three/4 in | eight-one/8 in | two.5000 in | one-thirteen/16 in | 13/16 in | 5/eight in |
| NP47 | UCP 215-47 | two fifteen/sixteen in | three-one/4 in | 10-thirteen/16 in | 8-one/two in | two.9375 in | one-one/four in | one in | seven/8 in |
| NP75MM | UCP 215 | N/A | three-1/4 in | ten-13/sixteen in | 8-1/2 in | two.9375 in | 1-one/4 in | 1 in | 7/8 in |
| NP48 | UCP 215-48 | 3 in | three-1/four in | ten-13/16 in | 8-one/2 in | 2.9375 in | 1-1/4 in | 1 in | 7/eight in |
ZheJiang DSR CZPT Co.,ltd is a professional producer of bearings, all varieties of rollers, with a lot more than 15 several years experience. Our manufacturing facility is in ZheJiang and our export office is in ZheJiang . We have set up extended-expression cooperative relations with buyers in Canada, Mexico, the United States and other countries and locations. So we also hope to cooperate with you! We feel that our secure high quality and competitive price will support you get a lot more market and far better advancement!
Right after many years of advancement, our company has fashioned a established of effective and cooperative management types and our business philosophy. “Take into account More From the CZPTer’s Aspect” is our support principle. As a experienced domestic & international investing business, our products are comprehensive and considerable. They are extensively utilised in metallurgy, mining, petroleum, equipment, electric powered energy, paper, grass and other fields. We sincerely hope that there will be more customers from distinct places to cooperate with our company, and we will give leading support.
We are really assured in our goods, and we are sure that we can earn your have faith in!
Q:What the MOQ of your business?
A: In stock, MOQ is 1pc.
Q:Could you take OEM and personalize?
A:Of course, we can customize for you according to sample or drawing.
Q:Could you offer sample for free of charge?
A:Of course, we can supply sample for free of charge, you only need to spend for the delivery price.
Q:Is you firm manufacturing facility or Trade Company?
A:We have our possess manufacturing facility our type is factory + trade.
Q:Could you explain to me the substance of your bearing?
A:We have chrome steel, and stainless metal, ceramic and carbon steel.
Q:Could you supply doorway to door provider?
A:Indeed, by express (DHL, FEDEX, TNT, EMS, 4-ten days to your metropolis.)
Q:What is your business payment terms?
A:T/T. Western Union, PayPal
Small get TT, a hundred% entire payment before delivery.
If large purchase we can do 50% down payment or 30% down payment 70% Equilibrium payment on copy of B/L, relies upon on the purchase.
Q:Could you explain to me the shipping and delivery time of your items?
A:If stock, in 7days or foundation on your purchase quantity.
