Tag Archives: dc worm gear motor

China high quality DC Electric 12V 24V 30W 80rpm 63mm Worm Gear Motor wiper Motor vacuum pump design

Product Description

voltage
VDC
no load speed
RPM
no load current
A
load torque
KG.CM
on load speed
RPM
power
W
ratio
12 80 1.8 60 68 80 60:1
12 130 1.2 33 110 30 20:1
12 150 1.2 45 130 30 20:1
12 170 1.4 35 150 45 24:1
24 30 1.4 60 25 30 60:1
24 65 120 50 60 80 20:1
24 210 1.0 40 180 45 75:1

technical feature High Power version with 50A stall current:
With 48CPR encoder or not 48CPR
With back shaft or not.
With metal brush or carbon brush.
76mm dc worm gear motor
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Worm Gear Motor
Operating Speed: Low Speed
Excitation Mode: Excited
Function: Driving
Casing Protection: Open Type
Number of Poles: 2
Customization:
Available

|

electric motor

What factors should be considered when selecting the right electric motor for a task?

When selecting the right electric motor for a task, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed overview of the factors that should be taken into account:

  1. Load Requirements: The first consideration is understanding the specific load requirements of the task. This includes factors such as the torque or force needed to drive the load, the speed range required, and any variations in load that may occur. By accurately assessing the load requirements, you can determine the appropriate motor type, size, and characteristics needed to handle the task effectively.
  2. Motor Type: Different motor types are suited for specific applications. Common motor types include AC induction motors, brushless DC motors, brushed DC motors, and stepper motors. Each type has its own advantages and limitations in terms of speed range, torque characteristics, efficiency, control requirements, and cost. Choosing the right motor type depends on the task’s specific requirements and the desired performance.
  3. Power Supply: Consider the available power supply for the motor. Determine whether the application requires AC or DC power and the voltage and frequency range of the power source. Ensure that the motor’s power requirements align with the available power supply to avoid compatibility issues.
  4. Efficiency and Energy Consumption: Efficiency is an important factor to consider, especially for applications where energy consumption is a concern. Higher motor efficiency translates to lower energy losses and reduced operating costs over the motor’s lifetime. Look for motors with high efficiency ratings to minimize energy consumption and improve overall system efficiency.
  5. Environmental Factors: Assess the environmental conditions in which the motor will operate. Consider factors such as temperature, humidity, dust, and vibration. Some motors are specifically designed to withstand harsh environmental conditions, while others may require additional protection or enclosures. Choosing a motor that is suitable for the intended environment will ensure reliable and long-lasting operation.
  6. Control and Feedback Requirements: Determine whether the application requires precise control over motor speed, position, or torque. Some tasks may benefit from closed-loop control systems that incorporate feedback devices like encoders or sensors to provide accurate motor control. Evaluate the control and feedback requirements of the task and select a motor that is compatible with the desired control mechanism.
  7. Physical Constraints: Consider any physical constraints or limitations that may impact motor selection. These constraints may include space restrictions, weight limitations, mounting options, and mechanical compatibility with other components or equipment. Ensure that the chosen motor can physically fit and integrate into the system without compromising performance or functionality.
  8. Cost and Budget: Finally, consider the budget and cost constraints associated with the motor selection. Evaluate the initial purchase cost of the motor as well as the long-term operating costs, including maintenance and energy consumption. Strive to strike a balance between performance and cost-effectiveness to ensure the best value for your specific application.

By considering these factors, you can make an informed decision when selecting the right electric motor for a task. It is crucial to thoroughly analyze the requirements and match them with the motor’s specifications to achieve optimal performance, reliability, and efficiency.

electric motor

How do electric motors handle variations in voltage and frequency?

Electric motors are designed to handle variations in voltage and frequency to ensure proper operation and performance. The ability of electric motors to adapt to different voltage and frequency conditions depends on their design characteristics and the presence of additional control devices. Here’s a detailed explanation of how electric motors handle variations in voltage and frequency:

  1. Voltage Variations: Electric motors can handle certain variations in voltage without significant issues. The motor’s design factors in a voltage tolerance range to accommodate fluctuations in the power supply. However, excessive voltage variations beyond the motor’s tolerance can affect its performance and lead to problems such as overheating, increased energy consumption, and premature failure. To mitigate the impact of voltage variations, electric motors may incorporate the following features:
    • Voltage Regulation: Some electric motors, especially those used in industrial applications, may include voltage regulation mechanisms. These mechanisms help stabilize the motor’s voltage, compensating for slight voltage fluctuations and maintaining a relatively steady supply.
    • Voltage Protection Devices: Motor control circuits often incorporate protective devices such as voltage surge suppressors and voltage regulators. These devices help prevent voltage spikes and transient voltage variations from reaching the motor, safeguarding it against potential damage.
    • Voltage Monitoring: In certain applications, voltage monitoring systems may be employed to continuously monitor the motor’s supply voltage. If voltage variations exceed acceptable limits, the monitoring system can trigger alarms or take corrective actions, such as shutting down the motor to prevent damage.
  2. Frequency Variations: Electric motors are designed to operate at a specific frequency, typically 50 or 60 Hz, depending on the region. However, variations in the power system frequency can occur due to factors such as grid conditions or the use of frequency converters. Electric motors handle frequency variations in the following ways:
    • Constant Speed Motors: Most standard electric motors are designed for operation at a fixed speed corresponding to the rated frequency. When the frequency deviates from the rated value, the motor’s rotational speed changes proportionally. This can affect the motor’s performance, especially in applications where precise speed control is required.
    • Variable Frequency Drives (VFDs): Variable frequency drives are electronic devices that control the speed of an electric motor by varying the supplied frequency and voltage. VFDs allow electric motors to operate at different speeds and handle frequency variations effectively. By adjusting the frequency and voltage output, VFDs enable precise control of motor speed and torque, making them ideal for applications where speed control and energy efficiency are critical.
    • Inverter Duty Motors: Inverter duty motors are specifically designed to handle the frequency variations encountered when operated with VFDs. These motors feature improved insulation systems and robust designs to withstand the harmonic distortions and voltage spikes associated with VFD operation.
  3. Motor Protection: Electric motors may incorporate protective features to safeguard against adverse effects caused by voltage and frequency variations. These protection mechanisms include:
    • Thermal Protection: Motors often include built-in thermal protection devices such as thermal switches or sensors. These devices monitor the motor’s temperature and can automatically shut it down if it exceeds safe limits due to voltage or frequency variations that lead to excessive heating.
    • Overload Protection: Overload protection devices, such as overload relays, are employed to detect excessive currents drawn by the motor. If voltage or frequency variations cause the motor to draw abnormal currents, the overload protection device can interrupt the power supply to prevent damage.
    • Voltage/Frequency Monitoring: Advanced motor control systems may incorporate voltage and frequency monitoring capabilities. These systems continuously measure and analyze the motor’s supply voltage and frequency, providing real-time feedback on any deviations. If voltage or frequency variations exceed predetermined thresholds, the monitoring system can activate protective actions or trigger alarms for further investigation.

In summary, electric motors handle variations in voltage and frequency through design considerations, additional control devices, and protective mechanisms. Voltage variations are managed through voltage regulation, protective devices, and monitoring systems. Frequency variations can be accommodated by using variable frequency drives (VFDs) or employing inverter duty motors. Motor protection features, such as thermal protection and overload relays, help safeguard the motor against adverse effects caused by voltage and frequency variations. These measures ensure the reliable and efficient operation of electric motors under different voltage and frequency conditions.

electric motor

How do electric motors generate motion and mechanical work?

Electric motors generate motion and mechanical work through the interaction of magnetic fields and the conversion of electrical energy into mechanical energy. Here’s a detailed explanation of how electric motors accomplish this:

  1. Magnetic Fields: Electric motors consist of a stationary part called the stator and a rotating part called the rotor. The stator contains coils of wire that are supplied with an electric current, creating a magnetic field around them. The rotor, on the other hand, typically has magnets or electromagnets that produce their own magnetic fields.
  2. Magnetic Field Interaction: When an electric current flows through the coils in the stator, it generates a magnetic field. The interaction between the magnetic fields of the stator and the rotor creates a rotational force, also known as torque. This torque causes the rotor to start rotating.
  3. Electromagnetic Induction: In certain types of electric motors, such as induction motors, electromagnetic induction plays a significant role. When alternating current (AC) is supplied to the stator, it creates a changing magnetic field. This changing magnetic field induces voltage in the rotor, which leads to the flow of current in the rotor. The current in the rotor produces its own magnetic field, and the interaction between the stator’s magnetic field and the rotor’s magnetic field results in rotation.
  4. Commutation: In motors that use direct current (DC), such as brushed DC motors, commutation is employed. Commutation is the process of reversing the direction of current in the rotor’s electromagnets as the rotor rotates. This is done using a component called a commutator, which ensures that the magnetic fields of the rotor and the stator are always properly aligned. By periodically reversing the current, the commutator allows for continuous rotation.
  5. Conversion of Electrical Energy to Mechanical Energy: As the rotor rotates, the mechanical energy is produced. The rotational motion of the rotor is transferred to the motor’s output shaft, which is connected to the load or the device that needs to be driven. The mechanical work is performed as the output shaft drives the load, such as spinning a fan blade, rotating a conveyor belt, or powering a machine.

In summary, electric motors generate motion and mechanical work by utilizing the interaction of magnetic fields and the conversion of electrical energy into mechanical energy. The electric current flowing through the stator’s coils creates a magnetic field that interacts with the magnetic field of the rotor, producing torque and initiating rotation. In some motors, electromagnetic induction is employed, where a changing magnetic field induces voltage and current in the rotor, leading to rotation. Commutation, in certain motor types, ensures continuous rotation by reversing the current in the rotor’s electromagnets. The resulting rotational motion is then transferred to the motor’s output shaft, enabling the motor to perform mechanical work by driving the load.

China high quality DC Electric 12V 24V 30W 80rpm 63mm Worm Gear Motor wiper Motor   vacuum pump design		China high quality DC Electric 12V 24V 30W 80rpm 63mm Worm Gear Motor wiper Motor   vacuum pump design
editor by CX 2024-04-03

China Good quality 12V 24V 48V 72V 310V 90nm 80 Rpm 60rpm 1kw Brushless DC Worm Gear Electric Motor a/c vacuum pump

Product Description

Product Description

Feature:
A. High power range from 50W to 2KW
B. Dia: 57mm-110mm
C. Easy for speed & direction adjustment
D. Rich stock and fast shipping time in 10 working days
E. Strong stability for driver/controller
F. Lifetime above continuous 10000 hours
G. IP65 protection rank is available for us
H. Above 90% enery efficiency motor is available
I. 3D file is available if customers needed
K.High-performance and stable matching driver and controller

Kindly remind: As different customers may need different motor parameter for fitting your equipment. If below motor can’t fit your need, please kindly send inquiry to us with information for rated power or torque,rated speed, and rated voltage for our new size drawing making for you. CLICK HERE to contact me. Thanks a lot!
Δ 86mm BLDC Motor with RV40 Worm Gearbox Size Dimensions
Dimensions (Unit: mm )
Mounting screws are included with gear head.

Δ Brushless DC Motor Specification:

Motor Power (W)

600

1000

1500

Motor Length(mm)

123

153

183

Motor Rated Speed(rpm)

2000

Δ RV63 Worm Gearbox Specification:

Gear Ratio 7.5 10 15 20 25 30 40 50 60 80 100
Rated output speed(rpm) 267 200 133 100 80 67 50 40 33 25 20
Rated Torque(N.m)  28.7 38.2 57.3 74.5 90.7 106 133.7 124 94 115 87

Other Specification form:
Δ Motor interface, Voltage, Speed can be customized.

For More Details Of Product Specifications,
Please Click here contact us for updated size drawing if you have other different parameter needed. Thanks

 

More Motor Flange Size

Δ More Motor Flange Size to choose, if you need other size. Welcome to contact us to custom.

BLDC Motor with Gearbox Range

Company Profile

DMKE motor was founded in China, HangZhou city,Xihu (West Lake) Dis. district, in 2009. After 12 years’ creativity and development, we became 1 of the leading high-tech companies in China in dc motor industry.

We specialize in high precision micro dc gear motors, brushless motors, brushless controllers, dc servo motors, dc servo controllers etc. And we produce brushless dc motor and controller with wide power range from 5 watt to 20 kilowatt; also dc servo motor power range from 50 watt to 10 kilowatt. They are widely used in automatic guided vehicle , robots, lifting equipment,cleaning machine, medical equipment, packing machinery, and many other industrial automatic equipments.

With a plant area of 4000 square meters, we have built our own supply chain with high quality control standard and passed ISO9001 certificate of quality system.

With more than 10 engineers for brushless dc motor and controllers’ research and development, we own strong independent design and development capability. Custom-made motors and controllers are widely accepted by us. At the same time, we have engineers who can speak fluent English. That makes we can supply intime after-sales support and guidance smoothly for our customers.

Our motors are exported worldwide, and over 80% motors are exported to Europe, the United States, Saudi Arabia, Australia, Korea etc. We are looking CHINAMFG to establishing long-term business relationship together with you for mutual business success.

FAQ

Q1: What kind motors you can provide?
A1: For now, we mainly provide permanent magnet brushless dc motor, dc gear motor, micro dc motor, planetary gear motor, dc servo motor, brush dc motors, with diameter range from 16 to 220mm,and power range from 5W to 20KW.

Q2: Is there a MOQ for your motors?
A2: No. we can accept 1 pcs for sample making for your testing,and the price for sample making will have 10% to 30% difference than bulk price based on different style.

Q3: Could you send me a price list?
A3: For all of our motors, they are customized based on different requirements like power, voltage, gear ratio, rated torque and shaft diameter etc. The price also varies according to different order qty. So it’s difficult for us to provide a price list.
If you can share your detailed specification and order qty, we’ll see what offer we can provide.

Q4: Are you motors reversible?
A4: Yes, nearly all dc and ac motor are reversible. We have technical people who can teach how to get the function by different wire connection.

Q5: Is it possible for you to develop new motors if we provide the tooling cost?
A5: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we’ll make our evaluation to see if we can arrange or not.

Q6:How about your delivery time?
A6: For micro brush dc gear motor, the sample delivery time is 2-5 days, bulk delivery time is about 15-20 days, depends on the order qty.
For brushless dc motor, the sample deliver time is about 10-15 days; bulk time is 15-20 days.
Pleasecontact us for final reference.

Q7:What’s your warranty terms?
A6: One year /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Industrial, Household Appliances, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Compound
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 8
Samples:
US$ 275.4/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

electric motor

What factors should be considered when selecting the right electric motor for a task?

When selecting the right electric motor for a task, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed overview of the factors that should be taken into account:

  1. Load Requirements: The first consideration is understanding the specific load requirements of the task. This includes factors such as the torque or force needed to drive the load, the speed range required, and any variations in load that may occur. By accurately assessing the load requirements, you can determine the appropriate motor type, size, and characteristics needed to handle the task effectively.
  2. Motor Type: Different motor types are suited for specific applications. Common motor types include AC induction motors, brushless DC motors, brushed DC motors, and stepper motors. Each type has its own advantages and limitations in terms of speed range, torque characteristics, efficiency, control requirements, and cost. Choosing the right motor type depends on the task’s specific requirements and the desired performance.
  3. Power Supply: Consider the available power supply for the motor. Determine whether the application requires AC or DC power and the voltage and frequency range of the power source. Ensure that the motor’s power requirements align with the available power supply to avoid compatibility issues.
  4. Efficiency and Energy Consumption: Efficiency is an important factor to consider, especially for applications where energy consumption is a concern. Higher motor efficiency translates to lower energy losses and reduced operating costs over the motor’s lifetime. Look for motors with high efficiency ratings to minimize energy consumption and improve overall system efficiency.
  5. Environmental Factors: Assess the environmental conditions in which the motor will operate. Consider factors such as temperature, humidity, dust, and vibration. Some motors are specifically designed to withstand harsh environmental conditions, while others may require additional protection or enclosures. Choosing a motor that is suitable for the intended environment will ensure reliable and long-lasting operation.
  6. Control and Feedback Requirements: Determine whether the application requires precise control over motor speed, position, or torque. Some tasks may benefit from closed-loop control systems that incorporate feedback devices like encoders or sensors to provide accurate motor control. Evaluate the control and feedback requirements of the task and select a motor that is compatible with the desired control mechanism.
  7. Physical Constraints: Consider any physical constraints or limitations that may impact motor selection. These constraints may include space restrictions, weight limitations, mounting options, and mechanical compatibility with other components or equipment. Ensure that the chosen motor can physically fit and integrate into the system without compromising performance or functionality.
  8. Cost and Budget: Finally, consider the budget and cost constraints associated with the motor selection. Evaluate the initial purchase cost of the motor as well as the long-term operating costs, including maintenance and energy consumption. Strive to strike a balance between performance and cost-effectiveness to ensure the best value for your specific application.

By considering these factors, you can make an informed decision when selecting the right electric motor for a task. It is crucial to thoroughly analyze the requirements and match them with the motor’s specifications to achieve optimal performance, reliability, and efficiency.

electric motor

How do electric motors contribute to the precision of tasks like robotics?

Electric motors play a critical role in enabling the precision of tasks in robotics. Their unique characteristics and capabilities make them well-suited for precise and controlled movements required in robotic applications. Here’s a detailed explanation of how electric motors contribute to the precision of tasks in robotics:

  1. Precise Positioning: Electric motors offer precise positioning capabilities, allowing robots to move with accuracy and repeatability. By controlling the motor’s speed, direction, and rotation, robots can achieve precise position control, enabling them to perform tasks with high levels of accuracy. This is particularly important in applications that require precise manipulation, such as assembly tasks, pick-and-place operations, and surgical procedures.
  2. Speed Control: Electric motors provide precise speed control, allowing robots to perform tasks at varying speeds depending on the requirements. By adjusting the motor’s speed, robots can achieve smooth and controlled movements, which is crucial for tasks that involve delicate handling or interactions with objects or humans. The ability to control motor speed precisely enhances the overall precision and safety of robotic operations.
  3. Torque Control: Electric motors offer precise torque control, which is essential for tasks that require forceful or delicate interactions. Torque control allows robots to exert the appropriate amount of force or torque, enabling them to handle objects, perform assembly tasks, or execute movements with the required precision. By modulating the motor’s torque output, robots can delicately manipulate objects without causing damage or apply sufficient force for tasks that demand strength.
  4. Feedback Control Systems: Electric motors in robotics are often integrated with feedback control systems to enhance precision. These systems utilize sensors, such as encoders or resolvers, to provide real-time feedback on the motor’s position, speed, and torque. The feedback information is used to continuously adjust and fine-tune the motor’s performance, compensating for any errors or deviations and ensuring precise movements. The closed-loop nature of feedback control systems allows robots to maintain accuracy and adapt to dynamic environments or changing task requirements.
  5. Dynamic Response: Electric motors exhibit excellent dynamic response characteristics, enabling quick and precise adjustments to changes in command signals. This responsiveness is particularly advantageous in robotics, where rapid and accurate movements are often required. Electric motors can swiftly accelerate, decelerate, and change direction, allowing robots to perform intricate tasks with precision and efficiency.
  6. Compact and Lightweight: Electric motors are available in compact and lightweight designs, making them suitable for integration into various robotic systems. Their small size and high power-to-weight ratio allow for efficient utilization of space and minimal impact on the overall weight and size of the robot. This compactness and lightness contribute to the overall precision and maneuverability of robotic platforms.

Electric motors, with their precise positioning, speed control, torque control, feedback control systems, dynamic response, and compactness, significantly contribute to the precision of tasks in robotics. These motors enable robots to execute precise movements, manipulate objects with accuracy, and perform tasks that require high levels of precision. The integration of electric motors with advanced control algorithms and sensory feedback systems empowers robots to adapt to various environments, interact safely with humans, and achieve precise and controlled outcomes in a wide range of robotic applications.

electric motor

How do electric motors handle variations in load, speed, and torque?

Electric motors are designed to handle variations in load, speed, and torque through various control mechanisms and techniques. Here’s a detailed explanation of how electric motors handle these variations:

  1. Load Variations: Electric motors can handle variations in load by adjusting the amount of torque they produce. When the load on the motor increases, such as when additional resistance or weight is applied, the motor responds by increasing the torque output. This is achieved through the control of the motor’s input current or voltage. For example, in DC motors, increasing the current supplied to the motor can compensate for the increased load, ensuring that the motor can continue to operate at the desired speed.
  2. Speed Variations: Electric motors can handle variations in speed by adjusting the frequency of the power supply or by varying the voltage applied to the motor. In AC motors, the speed is determined by the frequency of the alternating current, so changing the frequency can alter the motor’s speed. In DC motors, the speed can be controlled by adjusting the voltage applied to the motor. This can be achieved using electronic speed controllers (ESCs) or by employing pulse width modulation (PWM) techniques to control the average voltage supplied to the motor.
  3. Torque Variations: Electric motors can handle variations in torque by adjusting the current flowing through the motor windings. The torque produced by a motor is directly proportional to the current flowing through the motor. By increasing or decreasing the current, the motor can adjust its torque output to match the requirements of the load. This can be accomplished through various control methods, such as using motor drives or controllers that regulate the current supplied to the motor based on the desired torque.
  4. Control Systems: Electric motors often incorporate control systems to handle variations in load, speed, and torque more precisely. These control systems can include feedback mechanisms, such as encoders or sensors, which provide information about the motor’s actual speed or position. The feedback signals are compared to the desired speed or position, and the control system adjusts the motor’s input parameters accordingly to maintain the desired performance. This closed-loop control allows electric motors to respond dynamically to changes in load, speed, and torque.

In summary, electric motors handle variations in load, speed, and torque through various control mechanisms. By adjusting the current, voltage, or frequency of the power supply, electric motors can accommodate changes in load and speed requirements. Additionally, control systems with feedback mechanisms enable precise regulation of motor performance, allowing the motor to respond dynamically to variations in load, speed, and torque. These control techniques ensure that electric motors can operate effectively across a range of operating conditions and adapt to the changing demands of the application.

China Good quality 12V 24V 48V 72V 310V 90nm 80 Rpm 60rpm 1kw Brushless DC Worm Gear Electric Motor   a/c vacuum pump		China Good quality 12V 24V 48V 72V 310V 90nm 80 Rpm 60rpm 1kw Brushless DC Worm Gear Electric Motor   a/c vacuum pump
editor by CX 2024-03-29

China high quality D50 D60 D63 12V 24V Electric DC Worm Gear Motor/Planetary Gear Motor for Lifting System/Wiper Motor/Transmission Devices/Window Opener Motor vacuum pump ac system

Product Description

Product Description

MODEL VOLT POWER FREE SPEED FREE CURRENT
D49R 24V 30W 180±5RPM <0.65A
D76R 12V 70W 80±8RPM <0.65A
D63R 12V 70W 65±6RPM <0.65A

Motor Application

Production Line

Main Products

 

 

Packaging & Shipping

 

Company Profile

Certifications

 

FAQ

 

Our company FAQ for you
(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we’d love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it’s also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.

 

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Excited
Samples:
US$ 150/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

electric motor

What factors should be considered when selecting the right electric motor for a task?

When selecting the right electric motor for a task, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed overview of the factors that should be taken into account:

  1. Load Requirements: The first consideration is understanding the specific load requirements of the task. This includes factors such as the torque or force needed to drive the load, the speed range required, and any variations in load that may occur. By accurately assessing the load requirements, you can determine the appropriate motor type, size, and characteristics needed to handle the task effectively.
  2. Motor Type: Different motor types are suited for specific applications. Common motor types include AC induction motors, brushless DC motors, brushed DC motors, and stepper motors. Each type has its own advantages and limitations in terms of speed range, torque characteristics, efficiency, control requirements, and cost. Choosing the right motor type depends on the task’s specific requirements and the desired performance.
  3. Power Supply: Consider the available power supply for the motor. Determine whether the application requires AC or DC power and the voltage and frequency range of the power source. Ensure that the motor’s power requirements align with the available power supply to avoid compatibility issues.
  4. Efficiency and Energy Consumption: Efficiency is an important factor to consider, especially for applications where energy consumption is a concern. Higher motor efficiency translates to lower energy losses and reduced operating costs over the motor’s lifetime. Look for motors with high efficiency ratings to minimize energy consumption and improve overall system efficiency.
  5. Environmental Factors: Assess the environmental conditions in which the motor will operate. Consider factors such as temperature, humidity, dust, and vibration. Some motors are specifically designed to withstand harsh environmental conditions, while others may require additional protection or enclosures. Choosing a motor that is suitable for the intended environment will ensure reliable and long-lasting operation.
  6. Control and Feedback Requirements: Determine whether the application requires precise control over motor speed, position, or torque. Some tasks may benefit from closed-loop control systems that incorporate feedback devices like encoders or sensors to provide accurate motor control. Evaluate the control and feedback requirements of the task and select a motor that is compatible with the desired control mechanism.
  7. Physical Constraints: Consider any physical constraints or limitations that may impact motor selection. These constraints may include space restrictions, weight limitations, mounting options, and mechanical compatibility with other components or equipment. Ensure that the chosen motor can physically fit and integrate into the system without compromising performance or functionality.
  8. Cost and Budget: Finally, consider the budget and cost constraints associated with the motor selection. Evaluate the initial purchase cost of the motor as well as the long-term operating costs, including maintenance and energy consumption. Strive to strike a balance between performance and cost-effectiveness to ensure the best value for your specific application.

By considering these factors, you can make an informed decision when selecting the right electric motor for a task. It is crucial to thoroughly analyze the requirements and match them with the motor’s specifications to achieve optimal performance, reliability, and efficiency.

electric motor

How do electric motors handle variations in voltage and frequency?

Electric motors are designed to handle variations in voltage and frequency to ensure proper operation and performance. The ability of electric motors to adapt to different voltage and frequency conditions depends on their design characteristics and the presence of additional control devices. Here’s a detailed explanation of how electric motors handle variations in voltage and frequency:

  1. Voltage Variations: Electric motors can handle certain variations in voltage without significant issues. The motor’s design factors in a voltage tolerance range to accommodate fluctuations in the power supply. However, excessive voltage variations beyond the motor’s tolerance can affect its performance and lead to problems such as overheating, increased energy consumption, and premature failure. To mitigate the impact of voltage variations, electric motors may incorporate the following features:
    • Voltage Regulation: Some electric motors, especially those used in industrial applications, may include voltage regulation mechanisms. These mechanisms help stabilize the motor’s voltage, compensating for slight voltage fluctuations and maintaining a relatively steady supply.
    • Voltage Protection Devices: Motor control circuits often incorporate protective devices such as voltage surge suppressors and voltage regulators. These devices help prevent voltage spikes and transient voltage variations from reaching the motor, safeguarding it against potential damage.
    • Voltage Monitoring: In certain applications, voltage monitoring systems may be employed to continuously monitor the motor’s supply voltage. If voltage variations exceed acceptable limits, the monitoring system can trigger alarms or take corrective actions, such as shutting down the motor to prevent damage.
  2. Frequency Variations: Electric motors are designed to operate at a specific frequency, typically 50 or 60 Hz, depending on the region. However, variations in the power system frequency can occur due to factors such as grid conditions or the use of frequency converters. Electric motors handle frequency variations in the following ways:
    • Constant Speed Motors: Most standard electric motors are designed for operation at a fixed speed corresponding to the rated frequency. When the frequency deviates from the rated value, the motor’s rotational speed changes proportionally. This can affect the motor’s performance, especially in applications where precise speed control is required.
    • Variable Frequency Drives (VFDs): Variable frequency drives are electronic devices that control the speed of an electric motor by varying the supplied frequency and voltage. VFDs allow electric motors to operate at different speeds and handle frequency variations effectively. By adjusting the frequency and voltage output, VFDs enable precise control of motor speed and torque, making them ideal for applications where speed control and energy efficiency are critical.
    • Inverter Duty Motors: Inverter duty motors are specifically designed to handle the frequency variations encountered when operated with VFDs. These motors feature improved insulation systems and robust designs to withstand the harmonic distortions and voltage spikes associated with VFD operation.
  3. Motor Protection: Electric motors may incorporate protective features to safeguard against adverse effects caused by voltage and frequency variations. These protection mechanisms include:
    • Thermal Protection: Motors often include built-in thermal protection devices such as thermal switches or sensors. These devices monitor the motor’s temperature and can automatically shut it down if it exceeds safe limits due to voltage or frequency variations that lead to excessive heating.
    • Overload Protection: Overload protection devices, such as overload relays, are employed to detect excessive currents drawn by the motor. If voltage or frequency variations cause the motor to draw abnormal currents, the overload protection device can interrupt the power supply to prevent damage.
    • Voltage/Frequency Monitoring: Advanced motor control systems may incorporate voltage and frequency monitoring capabilities. These systems continuously measure and analyze the motor’s supply voltage and frequency, providing real-time feedback on any deviations. If voltage or frequency variations exceed predetermined thresholds, the monitoring system can activate protective actions or trigger alarms for further investigation.

In summary, electric motors handle variations in voltage and frequency through design considerations, additional control devices, and protective mechanisms. Voltage variations are managed through voltage regulation, protective devices, and monitoring systems. Frequency variations can be accommodated by using variable frequency drives (VFDs) or employing inverter duty motors. Motor protection features, such as thermal protection and overload relays, help safeguard the motor against adverse effects caused by voltage and frequency variations. These measures ensure the reliable and efficient operation of electric motors under different voltage and frequency conditions.

electric motor

What industries and applications commonly use electric motors?

Electric motors are widely utilized in various industries and applications due to their versatility, efficiency, and controllability. Here’s a detailed overview of the industries and applications where electric motors are commonly employed:

  1. Industrial Manufacturing: Electric motors are extensively used in industrial manufacturing processes. They power machinery and equipment such as conveyor systems, pumps, compressors, fans, mixers, robots, and assembly line equipment. Electric motors provide efficient and precise control over motion, making them essential for mass production and automation.
  2. Transportation: Electric motors play a crucial role in the transportation sector. They are used in electric vehicles (EVs) and hybrid electric vehicles (HEVs) to drive the wheels, providing propulsion. Electric motors offer benefits such as high torque at low speeds, regenerative braking, and improved energy efficiency. They are also employed in trains, trams, ships, and aircraft for various propulsion and auxiliary systems.
  3. HVAC Systems: Heating, ventilation, and air conditioning (HVAC) systems utilize electric motors for air circulation, fans, blowers, and pumps. Electric motors help in maintaining comfortable indoor environments and ensure efficient cooling, heating, and ventilation in residential, commercial, and industrial buildings.
  4. Appliances and Household Devices: Electric motors are found in numerous household appliances and devices. They power refrigerators, washing machines, dryers, dishwashers, vacuum cleaners, blenders, food processors, air conditioners, ceiling fans, and many other appliances. Electric motors enable the necessary mechanical actions for these devices to function effectively.
  5. Renewable Energy: Electric motors are integral components of renewable energy systems. They are used in wind turbines to convert wind energy into electrical energy. Electric motors are also employed in solar tracking systems to orient solar panels towards the sun for optimal energy capture. Additionally, electric motors are utilized in hydroelectric power plants for controlling water flow and generating electricity.
  6. Medical Equipment: Electric motors are crucial in various medical devices and equipment. They power surgical tools, pumps for drug delivery and fluid management, diagnostic equipment, dental drills, patient lifts, wheelchair propulsion, and many other medical devices. Electric motors provide the necessary precision, control, and reliability required in healthcare settings.
  7. Robotics and Automation: Electric motors are extensively used in robotics and automation applications. They drive the joints and actuators of robots, enabling precise and controlled movement. Electric motors are also employed in automated systems for material handling, assembly, packaging, and quality control in industries such as automotive manufacturing, electronics, and logistics.
  8. Aerospace and Defense: Electric motors have significant applications in the aerospace and defense sectors. They are used in aircraft for propulsion, control surfaces, landing gear, and auxiliary systems. Electric motors are also employed in military equipment, drones, satellites, guided missiles, and underwater vehicles.

These are just a few examples of the industries and applications where electric motors are commonly used. Electric motors provide a reliable, efficient, and controllable means of converting electrical energy into mechanical energy, making them essential components in numerous technologies and systems across various sectors.

China high quality D50 D60 D63 12V 24V Electric DC Worm Gear Motor/Planetary Gear Motor for Lifting System/Wiper Motor/Transmission Devices/Window Opener Motor   vacuum pump ac system	China high quality D50 D60 D63 12V 24V Electric DC Worm Gear Motor/Planetary Gear Motor for Lifting System/Wiper Motor/Transmission Devices/Window Opener Motor   vacuum pump ac system
editor by CX 2023-11-16

China Standard D50 D60 D63 12V 24V Electric DC Worm Gear Motor/Planetary Gear Motor for Lifting System/Wiper Motor/Transmission Devices/Window Opener Motor vacuum pump diy

Product Description

Product Description

MODEL VOLT POWER FREE SPEED FREE CURRENT
D49R 24V 30W 180±5RPM <0.65A
D76R 12V 70W 80±8RPM <0.65A
D63R 12V 70W 65±6RPM <0.65A

Motor Application

Production Line

Main Products

 

 

Packaging & Shipping

 

Company Profile

Certifications

 

FAQ

 

Our company FAQ for you
(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we’d love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it’s also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.

 

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Excited
Samples:
US$ 150/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

electric motor

Can you provide examples of machinery or equipment that rely on electric motors?

Electric motors are extensively used in various machinery and equipment across different industries. They play a crucial role in converting electrical energy into mechanical energy to power a wide range of applications. Here are some examples of machinery and equipment that heavily rely on electric motors:

  • Industrial Machinery: Electric motors are found in numerous industrial machinery and equipment, such as pumps, compressors, fans, conveyors, agitators, mixers, and machine tools. These motors provide the necessary power for moving fluids, gases, and materials, as well as driving mechanical processes in manufacturing, mining, construction, and other industrial applications.
  • Electric Vehicles: Electric motors are the primary propulsion system in electric vehicles (EVs) and hybrid electric vehicles (HEVs). They provide the power needed to drive the wheels and propel the vehicle. Electric motors in EVs and HEVs offer high efficiency, instant torque, and regenerative braking capabilities, contributing to the advancement of sustainable transportation.
  • Household Appliances: Many household appliances rely on electric motors for their operation. Examples include refrigerators, air conditioners, washing machines, dishwashers, vacuum cleaners, blenders, and electric fans. Electric motors enable the movement, cooling, or mechanical functions in these appliances, enhancing convenience and efficiency in daily household tasks.
  • HVAC Systems: Heating, ventilation, and air conditioning (HVAC) systems utilize electric motors for various functions. Motors power the fans in air handling units, circulate air through ducts, and drive compressors in air conditioning and refrigeration systems. Electric motors in HVAC systems contribute to efficient temperature control and air circulation in residential, commercial, and industrial buildings.
  • Medical Equipment: Electric motors are essential components in a wide array of medical equipment. Examples include MRI machines, X-ray machines, CT scanners, surgical robots, dental drills, infusion pumps, and patient lifts. These motors enable precise movements, imaging capabilities, and mechanical functions in medical devices, supporting diagnostics, treatment, and patient care.
  • Power Tools: Electric motors are commonly used in power tools such as drills, saws, grinders, sanders, and routers. They provide the rotational force and power required for cutting, shaping, drilling, and other tasks. Electric motors in power tools offer portability, ease of use, and consistent performance for both professional and DIY applications.
  • Aircraft Systems: Electric motors are increasingly utilized in aircraft systems. They power various components, including landing gear actuation systems, fuel pumps, hydraulic systems, and cabin air circulation systems. Electric motors in aircraft contribute to weight reduction, energy efficiency, and improved reliability compared to traditional hydraulic or pneumatic systems.

These examples represent just a fraction of the machinery and equipment that rely on electric motors. From industrial applications to household appliances and transportation systems, electric motors are integral to modern technology, providing efficient and reliable mechanical power for a wide range of purposes.

electric motor

What safety precautions should be followed when working with electric motors?

Working with electric motors requires adherence to specific safety precautions to ensure the well-being of individuals and prevent accidents. Electric motors involve electrical hazards that can cause electric shock, burns, or other injuries if proper safety measures are not followed. Here’s a detailed explanation of the safety precautions that should be followed when working with electric motors:

  1. Qualified Personnel: It is important to assign work on electric motors to qualified personnel who have the necessary knowledge, training, and experience in electrical systems and motor operation. Qualified electricians or technicians should handle installation, maintenance, and repairs involving electric motors.
  2. De-Energization and Lockout/Tagout: Before performing any work on electric motors, they should be de-energized, and appropriate lockout/tagout procedures should be followed. This involves isolating the motor from the power source, ensuring that it cannot be energized accidentally. Lockout/tagout procedures help prevent unexpected startup and protect workers from electrical hazards.
  3. Personal Protective Equipment (PPE): When working with electric motors, appropriate personal protective equipment should be worn. This may include insulated gloves, safety glasses, protective clothing, and footwear with electrical insulation. PPE helps protect against potential electrical shocks, burns, and other physical hazards.
  4. Inspection and Maintenance: Regular inspection and maintenance of electric motors are essential to identify potential issues or defects that could compromise safety. This includes checking for loose connections, damaged insulation, worn-out components, or overheating. Any defects or abnormalities should be addressed promptly by qualified personnel.
  5. Proper Grounding: Electric motors should be properly grounded to prevent electrical shock hazards. Grounding ensures that any fault currents are redirected safely to the ground, reducing the risk of electric shock to individuals working on or around the motor.
  6. Avoiding Wet Conditions: Electric motors should not be operated or worked on in wet or damp conditions unless they are specifically designed for such environments. Water or moisture increases the risk of electrical shock. If working in wet conditions is necessary, appropriate safety measures and equipment, such as waterproof PPE, should be used.
  7. Safe Electrical Connections: When connecting or disconnecting electric motors, proper electrical connections should be made. This includes ensuring that power is completely switched off, using appropriate tools and techniques for making connections, and tightening electrical terminals securely. Loose or faulty connections can lead to electrical hazards, overheating, or equipment failure.
  8. Awareness of Capacitors: Some electric motors contain capacitors that store electrical energy even when the motor is de-energized. These capacitors can discharge unexpectedly and cause electric shock. Therefore, it is important to discharge capacitors safely before working on the motor and to be cautious of potential residual energy even after de-energization.
  9. Training and Knowledge: Individuals working with electric motors should receive proper training and have a good understanding of electrical safety practices and procedures. They should be knowledgeable about the potential hazards associated with electric motors and know how to respond to emergencies, such as electrical shocks or fires.
  10. Adherence to Regulations and Standards: Safety precautions should align with relevant regulations, codes, and standards specific to electrical work and motor operation. These may include local electrical codes, occupational safety guidelines, and industry-specific standards. Compliance with these regulations helps ensure a safe working environment.

It is crucial to prioritize safety when working with electric motors. Following these safety precautions, along with any additional guidelines provided by equipment manufacturers or local regulations, helps minimize the risk of electrical accidents, injuries, and property damage. Regular training, awareness, and a safety-focused mindset contribute to a safer working environment when dealing with electric motors.

electric motor

How do electric motors handle variations in load, speed, and torque?

Electric motors are designed to handle variations in load, speed, and torque through various control mechanisms and techniques. Here’s a detailed explanation of how electric motors handle these variations:

  1. Load Variations: Electric motors can handle variations in load by adjusting the amount of torque they produce. When the load on the motor increases, such as when additional resistance or weight is applied, the motor responds by increasing the torque output. This is achieved through the control of the motor’s input current or voltage. For example, in DC motors, increasing the current supplied to the motor can compensate for the increased load, ensuring that the motor can continue to operate at the desired speed.
  2. Speed Variations: Electric motors can handle variations in speed by adjusting the frequency of the power supply or by varying the voltage applied to the motor. In AC motors, the speed is determined by the frequency of the alternating current, so changing the frequency can alter the motor’s speed. In DC motors, the speed can be controlled by adjusting the voltage applied to the motor. This can be achieved using electronic speed controllers (ESCs) or by employing pulse width modulation (PWM) techniques to control the average voltage supplied to the motor.
  3. Torque Variations: Electric motors can handle variations in torque by adjusting the current flowing through the motor windings. The torque produced by a motor is directly proportional to the current flowing through the motor. By increasing or decreasing the current, the motor can adjust its torque output to match the requirements of the load. This can be accomplished through various control methods, such as using motor drives or controllers that regulate the current supplied to the motor based on the desired torque.
  4. Control Systems: Electric motors often incorporate control systems to handle variations in load, speed, and torque more precisely. These control systems can include feedback mechanisms, such as encoders or sensors, which provide information about the motor’s actual speed or position. The feedback signals are compared to the desired speed or position, and the control system adjusts the motor’s input parameters accordingly to maintain the desired performance. This closed-loop control allows electric motors to respond dynamically to changes in load, speed, and torque.

In summary, electric motors handle variations in load, speed, and torque through various control mechanisms. By adjusting the current, voltage, or frequency of the power supply, electric motors can accommodate changes in load and speed requirements. Additionally, control systems with feedback mechanisms enable precise regulation of motor performance, allowing the motor to respond dynamically to variations in load, speed, and torque. These control techniques ensure that electric motors can operate effectively across a range of operating conditions and adapt to the changing demands of the application.

China Standard D50 D60 D63 12V 24V Electric DC Worm Gear Motor/Planetary Gear Motor for Lifting System/Wiper Motor/Transmission Devices/Window Opener Motor   vacuum pump diyChina Standard D50 D60 D63 12V 24V Electric DC Worm Gear Motor/Planetary Gear Motor for Lifting System/Wiper Motor/Transmission Devices/Window Opener Motor   vacuum pump diy
editor by CX 2023-10-23

China aslong reversible high torque turbo worm gear motor jgy370 6-24v 5rpm mini micro gear electric dc motor with worm gearbox manufacturer

Warranty: 3months-1year
Model Number: JGY-370
Utilization: BOAT, Auto, Electric Bicycle, Supporter, House Equipment, Cosmetic instrument, Sensible Home
Sort: Equipment MOTOR
Torque: .seventy four-58kg.cm
Development: Long term Magnet
Commutation: Brush
Protect Feature: Explosion-proof
Velocity(RPM): 2-160r/min
Steady Existing(A): .06a
Efficiency: IE 2
model: ASLONG
workable voltage: 3-24v
rated voltage: 6V 12V 24V DC
contruction: permament magnet
no load current: .06a
port of supply: HK
MOQ: 2pcs
Terms of payment: paypal,T/T
certification: CE/ROHS/CCC
Application: Home and place of work Automation,sensible property
Packaging Information: 24v dc worm equipment motorcarbon+bubble or blister packing

12V Volt DC Worm Geared Double Shaft Motor 6V Dual Output Shaft Reducer Motors 24V DC Reversed Reduction Self-lock JGY370 Aslong worm equipment motor sequenceBeneath are the different sort of worm geared motor in our business, you can click on the photo to buy if necessary. Merchandise Description Technical specs: * Rated Volt: DC 6v 12V 24V * Pace(No load): 2/6/ten/18/23/30/40/90/150 RPM * Max torque:24kg.cm * Major Substance:Metallic * Fat:160gThe motor has a self-locking purpose After disconnect the electricity provide, the shaft can be securely locked, can not easy to move by other drive. When your task is not connected to the power, you can make your project safely and securely continue to be somewhere. It can be used for some unique objective.These kinds of as Anti-theft sliding doorways. The shaft form of the motor : D kind, please refer to the dimensions chart underneath for all proportions of the motor. Equipment materials: Metallic gears make the motor previous for a longer time With self-locking, in the absence of electrical motors,The output shaft is not to shift.All metal gears,strong and sturdy, effectively shield the turbo worm equipment box motor entire body to improve service existence. Physical appearance & Proportions Complex Information 15years OEM&ODM in DC motor industrial,professional R&D of dc gear motors 3500+square meters creation place to offer the motors for customersHave a total top quality tests system,passed the ISO9001 administration program certification and handed the Eurpean ROHS,FCC,CE certificationMake numerous micro speed-reducing motor shafis,reduction gearbox and many others.in accordance tocustomer specifications Cooperation Associate Why choose us 1.Company Advantage:A. Our organization is a massive-scale professional producer deeply reliable by domestic and overseas clients, integrating advancement, production, wholesales and support.B. To make certain higher-good quality and greatest services ,kingly built up expert groups engaged in study,item engineering and revenue.C. We have ten years experience in the style of the investigation and growth, 350W 24V 36V 3100RPM High Pace MY1016 DC Gear Motor For E Bike Modified Automobile Equipment With robust technological innovation establishing potential and manufacturing ability, superior equipment2. Item Gain:A. Variety of goods,good quality assured, items are extensively usedB. Sophisticated merchandise testing equipmentC. Item overall flexibility, customise according to the specifications of the clientele any particular produce all varieties of molds, Impartial investigation and growth because the open mildew productsD. Goods through a variety of certification(CE,RoHs,ISO,CCC,UL….)E. Some items have patent certificate3. Primary solution advantage:A . Technical specs can be tailoer-produced in accordance to customer’s specifications.B. Can provide free of charge samplesC. Solution quality is guaranteed, a brief time period of supply Are there any related goods? Item software Opinions from clients OurTeam Organization Profile HangZhou CZPT Motor Co., Ltd. is a company of dc gear motor,bldc motor,worm equipment motor,micro motor,pwm motor and many others, with properly-geared up screening services and strong specialized drive. With a vast selection, good top quality, affordable charges and fashionable patterns, our goods are extensively utilised in many industries. Our goods are broadly recognized and trustworthy by customers and can meet continuously shifting financial and social demands. We welcome new and outdated consumers from all walks of daily life to contact us for long term enterprise associations and mutual good results! Product packaging FAQ 1)What is actually the value?We are a expert maker So the actual value is based on clients’ specifications,this kind of as the speed,voltage etc.two)What is the MOQ?We try to fulfill each and every client’s requests and do not want to disappoint our consumers.So the MOQ is versatile if the item is not challenging to produce and we are not in a active time.Kindly chat with our saler to validate it.three)What is actually the delivery time?At the initial we have an schedule, 24-72V Electrical Motor vehicle DC Brushless Motor the before you place order,the fater we end the production.In the slack year,we can make sure the shipping and delivery time is by 1 month.In the busy year,we want a lot more than 1 month if your quantity is large.The most essential,we can offer cost-free additional time prodution if your purchase is truly urgent.four)Can you send out some samples ahead of the purchase?Indeed of training course,we need to ship the sample to verify the good quality with you initial.UPS,TNT,FEDEX or DHL are all offered.five)Can you make our brand on the goods?Definitely,symbol is simple as most of our merchandise are customizable.So brand in typically emblem is required.It can be labeled on the motors.6)What is the payment term?For little quantity,we accept a hundred% payment through paypal.For huge sum,we acknowledge 30% telegraphic transfer(TT) as the deposit.And the relaxation need to be paid prior to shipping.seven)How to deliver the goods?we will supply by means of Express this kind of as UPS,FEDEX,DHL,TNT etc.It is quickly and security.If merchandise amount is large,the shipping and delivery expense will be expense-efficient.eight)Can you make our emblem on the goods?Definitely,logo is simple as most of our goods are customizable.So logo in generally emblem is needed.It can be printed,emboridered,embossed/jacquard.nine)What is the payment term?For modest sum,we settle for a hundred% payment via Western Union.For big amount,we accept thirty% telegraphic transfer(TT) as the deposit.And the relaxation need to be paid just before shipping.10)How to provide the goods?If goods amount is tiny,we will supply via Categorical this sort of as UPS,FEDEX,DHL,TNT and so forth.It is quickly and clients will not want to spend the custom made charge.If goods amount is huge,we will ship by sea.It will be quite economical.eleven)Does your business supply to any renowned hotels?As a top manufactuer of hotel items,we have several popular hotel and vacation resort consumers.This kind of as InterContinental Hotels Team,Marriott Lodge,The Ritz Carlton Resort and son on.If you need to have some samples of them,we can send out.12)Any other queries kindly chat with our income, Large High quality Health club Work out Excess weight Lifting Health Barbell Lock Clamp Collar In Shafts they will do the best to serve you.

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China aslong reversible high torque turbo worm gear motor jgy370 6-24v 5rpm mini micro gear electric dc motor with worm gearbox     manufacturer China aslong reversible high torque turbo worm gear motor jgy370 6-24v 5rpm mini micro gear electric dc motor with worm gearbox     manufacturer
editor by czh 2023-02-17

China Hot selling GM58 worm motor 24v dc gear motor with high torque 4NM gear motor with Good quality

Warranty: 3months-1year
Model Number: GM58EM545/555/575
Usage: Electric Bicycle, Home Appliance, GM58 worm motor 24v dc gear motor with high torque 4NM gear motor
Type: GEAR MOTOR
Torque: 0.2Nm
Construction: Permanent Magnet
Commutation: Brush
Protect Feature: Totally Enclosed
Speed(RPM): 100rpm
Continuous Current(A): 2.0-2.5A
Efficiency: Other
Diameter: 40*58mm
Encoder: 11ppr
Gearbox: 58*40mm
Stall current: 0.25-1.2A
Rated currrent: Customized
Rated Voltage: 12-24V or Customized
Rated torque: Customized
Stall torque: Customized
Keywords: 24v Dc Worm Gear Motor
Gears: Metal Spur Gears
Packaging Details: Polyfoam inside, strong export carton box outside, with pallet, or as the customer wished.GM5840-555PM 12vlot dc gear motor with 58mm gearbox.GM58 worm motor 24v dc gear motor with high torque 4NM gear motor

GM58 worm motor 24v dc gear motor with high torque 4NM gear motor Product Details

Motor Customized Specification, Please contact me.

Specification

L Dimension
545 Diameter —- 37mm , Length —- 50 mm
555 Diameter —- 37mm , Length —- 57 mm
575 Diameter —- 37mm , Length —- 60 mm
3157 Diameter —- 31mm , Length —- 57 mm

Motor Material

Specification
Ratio49K / 85K / 100K / 165K / 200K / 290K / 500K / 570K / 620K / 670KMax. Rated Torque30~40 Kgf.cmMax. Gear Breaked Torque60~80 Kgf.cmGearbox Efficiency10%~40%
Application
Certification
Customer Evaluation
Our Company
HangZhou Shunli Motor Co. Ltd has been established in 2005. It’s a high-tech enterprise integrating the research, development, production and sales of various kinds of micro DC motor, geared motor, planetary geared motor, shade pole geared motor and special gearbox motor. Products are widely used in automobiles, communications equipment, smart home, medical equipment, intelligent security, household appliances, western kitchen equipment, machinery and electronics and other high-end transmission structures, products are exported to more than 50 countries and regions at home and abroad.

FAQ1.Q: Are you trading company or manufacturer?A: We’re factory. We specialize in micro dc motor and dc gear motor for more than 14 years.2.Q: What is the payment term for a new customer?A: We can draw up an Ali Assurance Order Online for our new customer, which can pay online with Master Card, Visa, etc. Customer also can pay with PayPal or TT etc.3.Q: I can’t find a suitable motor on your website, can you customize the motor for me?A: Yes, we can customize a suitable motor according to our customer’s requirements.4.Q: Do you have certificates for the motors?A: Yes, we have CE, FCC, ISO, etc. If you have the other certificates requirement, we can apply it for you.5.Q: How is your Quality Control?A: We have professional checking staff on every production line process. After finishing the whole motor, we have the entire quality machine to test the motor. Such as Hardness Tester, 2.5D Image Tester, Salt Spray Chamber, Life Tester, Temperature Test Machine, and Noise tester etc.Recommend Product
Contact UsLooking forward to your feedback!
—————————Shunli Motor
HangZhou Shunli Motor Co., Ltd

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
Motor

Applications

There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

Size

The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
Motor

Cost

A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
Motor

Maintenance

Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China Hot selling GM58 worm motor 24v dc gear motor with high torque 4NM gear motor  with Good qualityChina Hot selling GM58 worm motor 24v dc gear motor with high torque 4NM gear motor  with Good quality

China Best Sales 12 Volt DC Worm Gear Small Motor China Supplier for Smart Electric-Drive Curtain wholesaler

Item Description

twelve Volt DC Worm Equipment Tiny Motor China Provider for Smart Electric-generate Curtain

Notice:With in excess of twenty years expertise in dc worm equipment motor,we can layout and manufacture according to your required like voltage,electrical power,velocity,torque,output shaft,motor dimension and motor route.
Motor sort:
modest gear motor ,worm motor,motor 24v,motor 24v dc,dc motor 24v,24v dc sliding motor,dc motor 12v 24v, 24v 100w motor, motor 24v dc 100w,dc motor 24v 500w,dc 24v motor,24 v motor,24vdc motor,24v dc motor lower rpm ,substantial torque 24v dc motor,dc electrical motor.

Model:D49SR-12v40w-130rpm
 

Type China tiny electrical motor
Motor  Diameter  49mm 59mm 63mm 76mm 88mm 110mm
Voltage 12v 24v 36v 42v 48v 
Electrical power 10w 15w 20w 40w 
Torque ≤15N.M
Pace 130rpm
Gear of ratio 30:1 
Equipment Modulus 30:1  M=one
Content of gear Plastic / copper
OEM/ODM Service Accept
Use Electric peak adjustable table ,electric forklift ,vending macine,car garage doorway opener,electric  glass lifter, vacuum cleaner,industrial device,other electrical resources .
Motor Gain 1.Reduced sound < 60db
two.Long daily life span > 4000hr(constantly functioning)
three.Aggressive factory value
4.Sample purchase are welcome
 

HangZhou CZPT Science & Technological innovation Co.,Ltd is a subsidiary of HangZhou CZPT Motor Co.,Ltd.The manufacturing unit is situated in Xihu (West Lake) Dis.,HangZhou,we can style and manufacture of motors according to all our customers’ requires so far,we can manufacture about 60,000 motors for each thirty day period.

Our major industry:

Europe,America and Asia,including United Kingdom, Germany, Italy, France, Sweden, United Condition,Brazil,India,Korea and so on.

Company Benefits:

  1. Massive creation capability, rapidly delivery.

  2. Rigid QC inspecting principles: all merchandise need to be one hundred% inspected ahead of supply.

  3. OEM/ODM companies are obtainable

 4. 24 hours on the internet services.

 5. Prompt quotation for your inquiry

  6. Good quality,reliability and lengthy item lifestyle.

  7. Skilled company offers competitive price.

  8. Diversified wealthy skilled skilled employees.

Much more Programs:

Vehicle simulator ,garage door opener,gate operator, packing barrier,vending machine,sewing machine, welding device,place of work clever tools,flooring polisher,truck carry,stair raise,hospital bed ,hydraulic pump electrical forklift.

RFQ:

Q: Are you buying and selling business or maker ?

A: We are Integration of industry and trade, with above twenty many years expertise in DC worm gear motor. Our firm have amassed experienced creation line, complete management and strong investigation help, which could match all of the customers’ demands and make them pleasure.
 

Q: What is your major merchandise?

DC Motor: Equipment motor and CZPT motor CZPT gearbox 
-Welding tools: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier
 

Q: What if I do not know which DC motor I need to have?

A: Do not fret, Send as considerably data as you can, our team will support you uncover the correct 1 you are searching for.
 

Q: What is your phrases of payment ?

A: Payment=1000USD, thirty% T/T in CZPT ,harmony ahead of shippment.
If you have an additional issue, pls truly feel totally free to contact us as underneath:
 

Q: How to shipping:

A: By sea – Buyer appoint forwarder, or our sales group discover appropriate forwarder for purchasers. 

By air – Buyer supply accumulate specific account, or our revenue crew locate appropriate express for consumers. (Primarily for sample)
Other folks – Really,samples send by DHL,UPS, TNT and Fedex and many others. We organize to supply items to some spot from China appointed by purchasers.

Q: How extended is your shipping and delivery time?
A: Typically it is 5-10 times if the items are in inventory. or it is 15-20 times if the items are not in stock, it is in accordance to quantity.

 

Induction motors, also recognized as asynchronous motors, use the electromagnetic induction generated by the magnetic subject of the stator to make recent in the rotor, thus creating torque. These motors do not operate at a velocity in sync with the recent, hence the title. They use the phenomenon of electromagnetic induction to change electrical strength into mechanical vitality. Induction motor rotors are the most widespread type of AC motor discovered in pumps, compressors, and other devices of all sorts.
These NEMA c-plane reducers are gear power, upkeep-cost-free, and can be set up in any orientation with a slip match “O” ring style. Available in lower to large reduction ratios, flange mount or base mount designs, correct angle or hollow shaft right angle versions. Set up NEMA C-Encounter AC motors, brushless DC motors, and brushed DC motors. For 1/2 HP to 3 HP Motors NEMA 56C, 140TC, and 180TC Input Flange Inline Helical Gear Reducers Correct Angle Hypoid Equipment Reducers

China Best Sales 12 Volt DC Worm Gear Small Motor China Supplier for Smart Electric-Drive Curtain     wholesaler

China supplier 24V 103rpm 300W-450W DC Worm Gear Reducer Motor on Electric Powering Golf Trolley with Great quality

Solution Description

Item Description

We are 1 OEM Manufacturer for various dump truck gear motor, trap device motor,NMRV worm gear motor, agricultural seeder motor,  DC wiper motor, electric powered mobility motor, electric powered transaxle motor and so forth.
1. Motor kind: Long term CZPT DC
2. Rated velocity: 2200rpm-3500rpm
three. Protection: IP44, IP55
four. Voltage: 12V, 24V
5.Gear Ratio: 25:1, thirty:1, fifty:1, 60:1
six.Output pace: 52rpm, 80rpm, 98rpm, 103rpm, 184rpm
seven. Output electricity: 130W, 180W, 240W, 320W on this DC wiper motor variety
8. Gearbox: worm and wheel
nine. Insulation: Course F
10. Effectiveness: sixty five%

In depth Photographs

 

Packaging & Transport

1. Internal packing: CZPT bag, air bubble bag, carton, in accordance to buyer’s request.
2. Outer packing: wooden circumstance, double corrugated carton or including pallet. 
3. You should bear in mind to leave the appropriate make contact with Address info for shipping.

Solution Parameters

Firm Profile

Our Main range of DC motors, electrical transaxle motor, wheelchair motor and gearboxes  are exclusively developed to be interchangeable and flexible, this aids us preserve lower inventory amounts although obtaining the customization essential for so several applications. The core offer you has also enabled us to offer you excellent pricing ranges for low quantities, often prototypes are very expensive due to deficiency of economies of scale we have tried to support with this as much as possible. HangZhou CZPT can supply bespoke models for greater portions and offer you a Supply Chain services exactly where we operate carefully with our buyers to identify the optimal shipping routine in accordance with OEM generation amounts. If you are seeking for DC motors, wiper motors, electric powered transaxle motor, wheelchair motor and gearboxes, you have occur to the correct area, our specialist technological income personnel will advocate the very best attainable alternative for equally your software and your pocket. Speak to us now to go over your application.
HangZhou CZPT TRADE CO., LTD is accountable for exporting the earlier mentioned items, and we also import some critical goods from oversea markets.
Our organization has received the appropriate of import and export from the Government department.
It is required to get your certain prerequisite when getting in touch with us,
(1) for example of motor, voltage, electrical power, speed, output torque, connecting type and size of shaft, exterior structure drawing or appropriate pictures and so on.
(2) for illustration of electric powered transaxle, confirm its wheel foundation, power, voltage, business discipline, managing speed, wheel tyre’s diameter and width, loaded bodyweight and many others, and then we will give the precise offers.
Therefore, hope to get your comments before long.

Please view our method actions as under
(1) procedure these output shafts

(2)process these spur gears and sprockets

(3) turning machining

(4) assembly planning

(5) assembly workshop

(6) inspection examination prior to cargo

Our Benefits

Decide on US FOR:
one. We offer you engineer recommendation to your specified design in generation enhancement and value saving.
2. R&D and QC department focus on the merchandise to meet up with your strict needs.
three. Various area treatment options offered, plating, electrical power coating, portray, anodized,sprucing, electrophoresis, and so forth.
4. Different dimensions in accordance to buyer’s ask for.
five. A variety of packagings according to particular demands.
6. Personalized and tailor-made orders are welcome.
seven. Very good quality and Fast action.
8. Our items have been exported to America, Australia,German,Korea,Indian.
 
Confidential Policy:
one) The appointed items are only for you. 
two) Your informations&files are confidential.
three) Your drawings&sketch are confidential.

Soon after Revenue Services

Our goods can be fixed or replaced the new parts with totally free expense in 3 months. 

FAQ

Concern:
one.Q:How about CZPT cost? 
  A: primarily count on : 1.Drawing, 2.content, 3.weight and amount. 
      We need to know the framework of each parts to examine the mildew answer by: 

one) –Full design drawing or real sample  —– the best way
    –PDF drawing with complete dimension for every areas
    –Obviously photographs for each areas with a lot more angle-sights to display every single attributes.

2)The materials and surface therapies.

three)The quantity of purchase.

two.Q:How to control the item processing?
   A: The processing report or pictures will be despatched to the buyer every week/ every thirty day period for review.

three.Q:Who will very own the mould?
   A:Client, also the CZPT can be kept in our manufacturing unit for potential order.

four.Q:How long do you make your quotation? 
   A:After getting element informations we will quote in 1 to 3 times.

five.Q: Are the samples/prototype free of charge?

   A: billed,but it will be returned to consumer when an get confirmed and purchase quantity is over 5000 pcs.
      After your drawing confirmed and fees completed for the prototype, we will generate a sample
      by CNC machining. And the 1st demo samples (1-3pcs) will be transported to consumer
      by the DHL /Fedex at buyer’s categorical account or prepay the categorical fees. 

MOQ?  — 100units and settle for sample buy.

These NEMA c-plane reducers are equipment strength, servicing-cost-free, and can be installed in any orientation with a slip match “O” ring design and style. Obtainable in reduced to high reduction ratios, flange mount or base mount designs, appropriate angle or hollow shaft right angle variations. Set up NEMA C-Face AC motors, brushless DC motors, and brushed DC motors. For 1/2 HP to 3 HP Motors NEMA 56C, 140TC, and 180TC Enter Flange Inline Helical Equipment Reducers Correct Angle Hypoid Gear Reducers
The rotor of a reluctance motor is composed of a reliable forged metal part with a convex toothed rack. Their starting up approach is similar to an induction motor, but it operates like a synchronous motor. Generally, their rotors have fewer poles than stators, which minimizes torque ripple and helps prevent ideal pole alignment, as no torque is developed in that area. Reluctance motors selection in electrical power scores from a few watts to about 22 kilowatts.

China supplier 24V 103rpm 300W-450W DC Worm Gear Reducer Motor on Electric Powering Golf Trolley     with Great quality

China manufacturer 12V 16rpm DC Worm Gear Motor 70kg. Cm High Torque Turbine Electric Gearbox Motor Self-Locking Reversed Mini Engine Geared Motor for DIY Robot Door Lock Curtain near me supplier

Solution Description

12V 16rpm DC Worm Equipment Motor 70kg.cm High Torque Turbine Electric Gearbox Motor Self-locking Reversed Mini Motor Geared Motor for Do-it-yourself Robot Doorway Lock Curtain Machine (12V 16rpm)

1)Item Description:
    
1°size:Diameter 63mm 
    2°lifespan:2000 hours 
    3°gear content: plastic or brass
    4°IP price:IP54
   

2)Drawing of Motor:

three)Drawing of shaft view:

3)Total Specification:

Variety dc worm gear motor 
Motor  Diameter  63mm
Voltage 12v 24v 36v 42v 48v 
Electrical power ≤80W
Torque ≤15N.M
Pace ≤250RPM
Equipment of ratio 75:1  60:1  47:2  twenty:1 
Gear Modulus 75:1   M=.eight
47:2 M=1.twenty five
60:1 twenty:1 M=one
Substance of gear Plastic or Brass
OEM/ODM Provider Accept
Utilization Electric peak adjustable desk ,electric forklift ,vending macine,auto garage door opener,sweeper,vacuum cleaner,industrial machine,other electrical instruments .

 welding device, electrical family, CZPT equipment, workplace smart tools, hotel leisure, antomated machine and so on.

Motor Voltage: DC12V, 24V,42V,48V,90V,110V ,300V

Motor Rated Electrical power:15W, 25W,30W,45W,65W, 95W,120W,150W,180W

Motor no-load Pace:15RPM, 30RPM,60RPM,80RM,120RPM,150RPM,180RPM,200RPM,220RPM.

five)Factory demonstrate:

Transfer way:

 

six)RFQ:

Q: Are you trading organization or maker ?

A: We are Integration of market and trade, with more than twenty many years knowledge in DC worm equipment motor. Our business have gathered expert creation line, complete administration and strong study support, which could match all of the customers’ needs and make them gratification.
 

Q: What is your primary item?

DC Motor: Equipment motor, Square motor, Stepped motor, and CZPT motor
-Welding tools: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier
 

Q: What if I don’t know which DC motor I require?

A: Will not worry, Deliver as a lot details as you can, our team will assist you find the appropriate 1 you are seeking for.
 

Q: What is your terms of payment ?

A: Payment=1000USD, thirty% T/T in CZPT ,equilibrium just before shippment.
If you have an additional query, pls really feel free to speak to us as underneath:
 

Q: How to shipping:

A: By sea – Purchaser appoint forwarder, or our income crew find ideal forwarder for consumers. 

By air – Purchaser offer you accumulate convey account, or our sales group find appropriate express for buyers. (Primarily for sample)
Other individuals – In fact,samples ship by DHL,UPS, TNT and Fedex and so on. We organize to shipping merchandise to some area from China appointed by buyers.

Q: How long is your shipping time?
A: Generally it is 5-10 times if the items are in stock. or it is 15-twenty days if the goods are not in inventory, it is in accordance to quantity. 

7)Make contact with details:

 

 

AC motors vary from several other sorts of motors, especially some of the more acquainted DC (direct existing) motors, by a number of important standards. The most basic of these is the truth that an AC motor depends fully on the alternating current about its circuit to make successful mechanical energy. We are going to discuss this exclusive approach in more depth in the pursuing sections of this information.
Induction motors, also recognized as asynchronous motors, use the electromagnetic induction produced by the magnetic subject of the stator to generate existing in the rotor, thereby making torque. These motors do not run at a pace in sync with the present, therefore the title. They use the phenomenon of electromagnetic induction to transform electrical power into mechanical vitality. Induction motor rotors are the most widespread sort of AC motor found in pumps, compressors, and other devices of all types.

China manufacturer 12V 16rpm DC Worm Gear Motor 70kg. Cm High Torque Turbine Electric Gearbox Motor Self-Locking Reversed Mini Engine Geared Motor for DIY Robot Door Lock Curtain     near me supplier

12V Cost made in China – replacement parts – in Cochabamba Bolivia 24V Pm DC Worm Gear Electric Motor for Lifting Table Door with top quality

12V  Cost  made in China - replacement parts -  in Cochabamba Xihu (West Lake) Dis.via   24V Pm DC Worm Gear Electric Motor for Lifting Table  Door with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 diverse branches. For more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828

12v 24v PM DC Worm Equipment Electrical Motor for Lifting Desk/ Door 

Product:D76R(72)-24v120w-65rpm
 

Variety electric dc worm equipment motor 
Motor  Diameter  76mm
Voltage 12v 24v 36v 42v 48v 
Power ≤150W
Torque ≤23N.M
Pace ≤300RPM
Equipment of ratio 60:1 20:1 forty seven:2 
Equipment Modulus 60:1 twenty:1  M=one
Materials of equipment Plastic /brass
OEM/ODM Services Accept
Use Hydraulic pump,electrical forklift truck,vacuum cleaner , sweep,scrubber ,welding device ,electrical home, vending macine, industrial device,vehicle garage door opener,roller shutter doorway,other electric instruments .

HangZhou Huiyun Science & Engineering Co.,Ltd is a subsidiary of HangZhou Wewin Motor Co.,Ltd.The manufacturing unit is found in Xihu (West Lake) Dis.,HangZhou,we can design and manufacture of motors according to all our customers’ calls for so significantly,we can manufacture about 60,000 motors for each thirty day period.

Our major marketplace:

Europe,The usa and Asia,including United Kingdom, Germany, Italy, France, Sweden, United State,India,Korea and so on.

Organization Positive aspects:

  1. Big creation capability, quick supply.

  2. Rigid QC inspecting principles: all items have to be a hundred% inspected just before shipping and delivery.

  3. OEM/ODM providers are obtainable

 4. 24 hours on the web provider.

 5. Prompt quotation for your inquiry

  6. Quality,dependability and prolonged merchandise lifestyle.

  7. Specialist company delivers competitive price.

  8. Diversified prosperous seasoned experienced personnel.

Much more Applications:

Auto simulator ,garage doorway opener ,gate operator, packing barrier,wheelchair ,welding machine,electrical family,electric motor vehicle ,water pump ,oil pump, floor polisher,truck lift,stair raise,healthcare facility bed ,place of work smart products,hydraulic pump electric powered forklift.

RFQ:

Q: Are you buying and selling firm or producer ?

A: We are Integration of business and trade, with more than twenty many years encounter in DC worm equipment motor. Our company have accumulated expert production line, full management and potent research assist, which could match all of the customers’ needs and make them fulfillment.
 

Q: What is your principal item?

DC Motor: Equipment motor, Sq. motor, Stepped motor, and Micro motor
-Welding gear: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier
 

Q: What if I will not know which DC motor I want?

A: Never worry, Deliver as considerably info as you can, our staff will assist you discover the right 1 you are hunting for.
 

Q: What is your phrases of payment ?

A: Payment=1000USD, 30% T/T in advance ,stability before shippment.
If you have yet another issue, pls come to feel free to contact us as underneath:
 

Q: How to delivery:

A: By sea – Buyer appoint forwarder, or our revenue group find suited forwarder for purchasers. 

By air – Consumer offer you accumulate convey account, or our income team discover appropriate express for customers. (Mainly for sample)
Other individuals – Really,samples send out by DHL,UPS, TNT and Fedex etc. We prepare to supply products to some place from China appointed by customers.

Q: How extended is your supply time?
A: Normally it is 5-ten times if the goods are in stock. or it is 15-twenty days if the merchandise are not in stock, it is in accordance to quantity.

 

The use of original equipment manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our organization and the outlined replacement parts contained herein are not sponsored, approved, or produced by the OEM.

12V  Cost  made in China - replacement parts -  in Cochabamba Xihu (West Lake) Dis.via   24V Pm DC Worm Gear Electric Motor for Lifting Table  Door with top quality

12V  Cost  made in China - replacement parts -  in Cochabamba Xihu (West Lake) Dis.via   24V Pm DC Worm Gear Electric Motor for Lifting Table  Door with top quality