China Low Noise Micro Right Angle Gear Motor Planetary Electrical Motor wholesaler

Product Description

TaiBang Motor Market Team Co., Ltd.

The main items is induction motor, reversible motor, DC brush equipment motor, DC brushless equipment motor, CH/CV massive equipment motors, Planetary equipment motor ,Worm equipment motor etc, which utilised extensively in a variety of fields of producing pipelining, transportation, foods, medicine, printing, material, packing, workplace, equipment, amusement and so on, and is the favored and matched product for automatic device. 

Motor Design Instruction

4RK25GN-C 

        4 R K 25 R GN C  
Frame Size Variety Motor series Energy Speed
Manage
Motor
Shaft Variety Voltage Accent
two:60mm

3:70mm

four:80mm

5:90mm

six:104mm

I:Induction

R:Reversible

T:Torque

K sequence 6W

15W

25W

40W

60W

90W

120W

140W

180W

200W
 

A:Round Shaft

GN:Bevel Gear Shaft
       (6W,15W,25W,40W)

GU:Bevel Gear Shaft
      (60W,90W,120W,140W,180W,200W)

A:Solitary Period 110V

C:One Stage 220V

S:3-Period 220V

S3:3-Section 380V

S4:3-Period 440V

T/P:Thermally Protected

F:Supporter

M:Electro-magnetic
    Brake

Gear Head Product Instruction

4GN-100RC

four GN one hundred K  
Body Size Shaft Sort Equipment Reduction Ratio Bearing Kind Other info
two:60mm

3:70mm

4:80mm

5:90mm

six:104mm
 

GN:Bevel Equipment Shaft
      (60#,70#,80#,ninety# reduction equipment head)

GU:Bevel Gear Shaft
      (a hundred# reduction equipment head)

GM:Intermediate Gear Head

GS:Gearhead with ears

1:100 K:Regular Rolling Bearing

RT:Proper Angle With Axile

RC:Correct Angle With Hollow Shaft
 

This kind of as shaft diameter,shaft length,and so forth.

Specification of motor 25W 80mm Fixed pace AC gear motor

Type  Gear Tooth Output Shaft Power
(W)
Frequency
(Hz)
Voltage
(V)
Current
(A)
Start Torque
(g.cm)
Rated Gearbox Variety
Torque
(g.cm)
Speed
(rpm)
Bearing Gearbox Middle Gearbox
Reversible Motor 4RK25GN-C  25 50 220 .thirty 1950 1950 1250 4GN/GU-K 4GN10X
twenty five sixty 220 .27 1650 1620 1500 4GN/GU-K 4GN10X

Equipment Head Torque Desk(Kg.cm)                                                                                                                                                                                         (kg.cm×9.8÷100)=N.m

Output Pace :RPM 500 three hundred two hundred a hundred and fifty a hundred and twenty 100 75 sixty fifty thirty 20 fifteen 10 7.5 six 5 three
Speed Ratio 50Hz three 5 seven.five 10 12.5 15 twenty 25 thirty 50 75 100 one hundred fifty 200 250 300 five hundred
60Hz 3.6 six nine   15 18   thirty 36 60 ninety a hundred and twenty 180   three hundred 360 600
Allowed
Torque
25W kg.cm 4 six.seven ten 13.three 16 twenty 26.seven 32 39 65 eighty eighty eighty 80 eighty 80 eighty
30W kg.cm four.eight eight twelve sixteen 20 24 32 38 forty six 76 80 80 80 80 80 80 eighty
40W kg.cm 6.seven eleven sixteen 21.three 28 33 42 fifty four 65 80 eighty eighty 80 eighty eighty 80 eighty
Note: Velocity figures are dependent on synchronous velocity, The actual output velocity, under rated torque situations, is about ten-20% less than synchronous speed, a gray history suggests output shaft of geared motor rotates in the exact same course as output shaft of motor. A white background indicates rotates rotation in the opposite direction.

Exterior Dimension

4I(R)K25/4A(GN)(   )

Sort Reduction Ratio L1
mm
L2
mm
L3
mm
4RK25GN 1:3~1:twenty 86 32 118
1:twenty five~1:180 eighty five 44 130

4I(R)K25/4GN(    )RC

4I(R)K25/4GN(    )RT
Previously mentioned drawing is for regular screw gap.If want by means of gap, terminal box, or digital magnet brake, need to have to tell the vendor.
 

Connection Diagram:

FAQ

Q: How about your business?
A:We are equipment motor manufacturing facility located in HangZhou metropolis of China,we begin from 1995 ,we have far more than 1200 personnel ,primary merchandise is AC micro equipment motor 6W to 250W, AC small equipment motor 100W to 3700W,brush DC motor 10W to 400W,brushless motor 10W to 750W,drum motor 60W to 3700W ,Planetary gearbox ,worm gearbox etc .

Q: How to choose a suited motor?
A:If you have gear motor images or drawings to display us, or you explain to us detailed specs like voltage, velocity, torque, motor dimension, functioning method of the motor, essential life span and sounds amount etc, please do not be reluctant to let us know, then we can advise suited motor for each your ask for .

Q: Can you make the equipment motor with customize specifications ?
Sure, we can customize for each your request for the voltage, pace, torque and shaft size and condition. If you need to have additional wires or cables soldered on the terminal or need to incorporate connectors, or capacitors or EMC we can make it way too.

Q: What’s your lead time?
A: Usually our standard normal item will need 10-15days, a bit longer for personalized merchandise. But we are really versatile on the direct time, it will depend on the distinct orders.
Q: What is your MOQ?
A: If delivery by sea ,the minimal purchase is one hundred parts, if provide by categorical, there is no limit.
Q: Do you have the item in inventory?
A: I am sorry we do not have the item in inventory, All goods are manufactured with orders.
Q: How to speak to us ?
A: You can send out us enquiry . 

US $20-100
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industrial
Speed: Constant Speed
Number of Stator: Single-Phase
Function: Driving, Control
Casing Protection: Closed Type
Number of Poles: 4

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

        4 R K 25 R GN C  
Frame Size Type Motor series Power Speed
Control
Motor
Shaft Type Voltage Accessory
2:60mm

3:70mm

4:80mm

5:90mm

6:104mm

I:Induction

R:Reversible

T:Torque

K series 6W

15W

25W

40W

60W

90W

120W

140W

180W

200W
 

A:Round Shaft

GN:Bevel Gear Shaft
       (6W,15W,25W,40W)

GU:Bevel Gear Shaft
      (60W,90W,120W,140W,180W,200W)

A:Single Phase 110V

C:Single Phase 220V

S:3-Phase 220V

S3:3-Phase 380V

S4:3-Phase 440V

T/P:Thermally Protected

F:Fan

M:Electro-magnetic
    Brake

###

4 GN 100 K  
Frame Size Shaft Type Gear Reduction Ratio Bearing Type Other information
2:60mm

3:70mm

4:80mm

5:90mm

6:104mm
 

GN:Bevel Gear Shaft
      (60#,70#,80#,90# reduction gear head)

GU:Bevel Gear Shaft
      (100# reduction gear head)

GM:Intermediate Gear Head

GS:Gearhead with ears

1:100 K:Standard Rolling Bearing

RT:Right Angle With Axile

RC:Right Angle With Hollow Shaft
 

Such as shaft diameter,shaft length,etc.

###

Type  Gear Tooth Output Shaft Power
(W)
Frequency
(Hz)
Voltage
(V)
Current
(A)
Start Torque
(g.cm)
Rated Gearbox Type
Torque
(g.cm)
Speed
(rpm)
Bearing Gearbox Middle Gearbox
Reversible Motor 4RK25GN-C  25 50 220 0.30 1950 1950 1250 4GN/GU-K 4GN10X
25 60 220 0.27 1650 1620 1500 4GN/GU-K 4GN10X

###

Output Speed :RPM 500 300 200 150 120 100 75 60 50 30 20 15 10 7.5 6 5 3
Speed Ratio 50Hz 3 5 7.5 10 12.5 15 20 25 30 50 75 100 150 200 250 300 500
60Hz 3.6 6 9   15 18   30 36 60 90 120 180   300 360 600
Allowed
Torque
25W kg.cm 4 6.7 10 13.3 16 20 26.7 32 39 65 80 80 80 80 80 80 80
30W kg.cm 4.8 8 12 16 20 24 32 38 46 76 80 80 80 80 80 80 80
40W kg.cm 6.7 11 16 21.3 28 33 42 54 65 80 80 80 80 80 80 80 80
Note: Speed figures are based on synchronous speed, The actual output speed, under rated torque conditions, is about 10-20% less than synchronous speed, a grey background indicates output shaft of geared motor rotates in the same direction as output shaft of motor. A white background indicates rotates rotation in the opposite direction.

###

Type Reduction Ratio L1
mm
L2
mm
L3
mm
4RK25GN 1:3~1:20 86 32 118
1:25~1:180 85 44 130
US $20-100
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industrial
Speed: Constant Speed
Number of Stator: Single-Phase
Function: Driving, Control
Casing Protection: Closed Type
Number of Poles: 4

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

        4 R K 25 R GN C  
Frame Size Type Motor series Power Speed
Control
Motor
Shaft Type Voltage Accessory
2:60mm

3:70mm

4:80mm

5:90mm

6:104mm

I:Induction

R:Reversible

T:Torque

K series 6W

15W

25W

40W

60W

90W

120W

140W

180W

200W
 

A:Round Shaft

GN:Bevel Gear Shaft
       (6W,15W,25W,40W)

GU:Bevel Gear Shaft
      (60W,90W,120W,140W,180W,200W)

A:Single Phase 110V

C:Single Phase 220V

S:3-Phase 220V

S3:3-Phase 380V

S4:3-Phase 440V

T/P:Thermally Protected

F:Fan

M:Electro-magnetic
    Brake

###

4 GN 100 K  
Frame Size Shaft Type Gear Reduction Ratio Bearing Type Other information
2:60mm

3:70mm

4:80mm

5:90mm

6:104mm
 

GN:Bevel Gear Shaft
      (60#,70#,80#,90# reduction gear head)

GU:Bevel Gear Shaft
      (100# reduction gear head)

GM:Intermediate Gear Head

GS:Gearhead with ears

1:100 K:Standard Rolling Bearing

RT:Right Angle With Axile

RC:Right Angle With Hollow Shaft
 

Such as shaft diameter,shaft length,etc.

###

Type  Gear Tooth Output Shaft Power
(W)
Frequency
(Hz)
Voltage
(V)
Current
(A)
Start Torque
(g.cm)
Rated Gearbox Type
Torque
(g.cm)
Speed
(rpm)
Bearing Gearbox Middle Gearbox
Reversible Motor 4RK25GN-C  25 50 220 0.30 1950 1950 1250 4GN/GU-K 4GN10X
25 60 220 0.27 1650 1620 1500 4GN/GU-K 4GN10X

###

Output Speed :RPM 500 300 200 150 120 100 75 60 50 30 20 15 10 7.5 6 5 3
Speed Ratio 50Hz 3 5 7.5 10 12.5 15 20 25 30 50 75 100 150 200 250 300 500
60Hz 3.6 6 9   15 18   30 36 60 90 120 180   300 360 600
Allowed
Torque
25W kg.cm 4 6.7 10 13.3 16 20 26.7 32 39 65 80 80 80 80 80 80 80
30W kg.cm 4.8 8 12 16 20 24 32 38 46 76 80 80 80 80 80 80 80
40W kg.cm 6.7 11 16 21.3 28 33 42 54 65 80 80 80 80 80 80 80 80
Note: Speed figures are based on synchronous speed, The actual output speed, under rated torque conditions, is about 10-20% less than synchronous speed, a grey background indicates output shaft of geared motor rotates in the same direction as output shaft of motor. A white background indicates rotates rotation in the opposite direction.

###

Type Reduction Ratio L1
mm
L2
mm
L3
mm
4RK25GN 1:3~1:20 86 32 118
1:25~1:180 85 44 130

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China Low Noise Micro Right Angle Gear Motor Planetary Electrical Motor     wholesaler China Low Noise Micro Right Angle Gear Motor Planetary Electrical Motor     wholesaler
editor by czh 2022-12-16