China 42 High Efficiency Ultra-Precision Stepper Motor with Planetary Reducer Gearbox for 3D Printer manufacturer

Merchandise Description

 

Merchandise Description

Large Precision Planetary Equipment Stepper Motor

The substantial precision planetary gear stepper motor is high precision and low noise with precision steel enamel,can face up to higher axial power and radial force. Increased concentricity, much more steady transmission. These motors are available in standard:
Nema seventeen(42*34, 42*forty)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:40, 1:50,1:701:100. 
Nema 23(57*fifty five)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:forty
Nema 24(sixty*fifty five)
Reduction ratio:1:5 , 1:7 , 1:10 , 1:16 ,1:20 ,1:25 , 1:35 ,1:40
And 48 hours delivery, in stock .

Application:
Automation control, medical equipment, textile machinery, and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric  curtains, electric shutters, etc
 

Product Parameters

Planetary Equipment Box Specification:

General Specification:
Housing Content Steel
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 260N
Max.Shaft Axial Load 80N
Backlash at No-load 1 stage≤15′,2 stage≤20′

 

42HS Hybrid Stepping Motor Specs:
Model No. Motor Duration(L1) Rated Current Resistance Inductance Holding Torque # of Prospects Rotor Inertia Mass Max.Equipment Ratio
Voltage /Stage /Section /Phase
Single Shaft (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 34 two.93 1.three two.2 three.five 270 4 thirty .22 ≤1:one hundred
42HSC4409 forty 2.five 1.five 1.sixty five three.three 380 4 40 .3 ≤1:one hundred

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio three four 5 seven ten 12 15 sixteen 20 twenty five 28 35 40 fifty 70 100
Overall Peak(L1+L2) (mm) seventy four seventy four seventy four 74 74 85 85 85 85 85 85 eighty five eighty five eighty five 85 eighty five
Output torque ( mN.m) 777 1036 1296 1814 2592 3045 3807 4060 5076 6345 7106 8883 ten thousand 10000 10000 10000
Whole Excess weight(g) 470 470 470 470 470 570 570 570 570 570 570 570 570 570 570 570
Variety of equipment trains 1 2
Reducer Size(L2)   (mm) 40 51
Efficiency 96% 94%

 

Thorough Photos

 

Company Profile

ZheJiang UMot Technologies Co., Ltd. specializes in R&D and product sales of stepper motors, servo motors, linear modules and related movement management goods, customizing and planning higher-quality motor products for customers with particular needs about the globe, and offering general answers for movement control systems. Items are exported to much more than 30 international locations and regions which includes the United States, Germany, France, Italy, Russia, and Switzerland. The firm’s main merchandise and method design have been broadly used in automation control, precision devices, healthcare tools, sensible home, 3D printing and many other fields.
Our organization has been recognized as a high-tech company by pertinent departments, has a total good quality management system, has acquired ISO9001, CE, RoHs and other associated certifications, and holds a variety of electrical patent certificates. “Concentration, Professionalism, Concentration” in the area of automation of motor R&D and system manage options is the company’s organization function. “Be your most dependable partner” is the firm’s services philosophy. We have usually been aiming to “make very first-course goods with skilled technologies”, keep pace with the moments, innovate continually, and offer a lot more customers with much better items and providers.

FAQ

one. Delivery technique:
1)International Specific delivery DHL&FEDEX &UPS&TNT& 7-10days
2)Shipping by air 7-10 days
3)delivery by sea, shipping and delivery time relies upon on the vacation spot port.

2. Technical Assistance:
We can offer you with professional technological support. And our goods top quality promise is 6 months. Also, we settle for items tailored.

3. Why need to you get from us, not from other suppliers?
Professional 1-to-1 motor personalized. The world’s big enterprise of choice for higher-high quality suppliers. ISO9001:2008 high quality management technique certification, via the CE, ROHS certification.

four. How to pick types?
Before acquiring, remember to contact us to affirm product No. and specs to steer clear of any misunderstanding.

5. Are you a factory?
Of course, we are a factory, and we produce stepper motor/driver, Servo motor/driver.

 

To Be Negotiated 10 Pieces
(Min. Order)

###

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

General Specification:
Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 260N
Max.Shaft Axial Load 80N
Backlash at No-load 1 stage15′,2 stage20′

###

42HS Hybrid Stepping Motor Specifications:
Model No. Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 34 2.93 1.3 2.2 3.5 270 4 30 0.22 1:100
42HSC4409 40 2.5 1.5 1.65 3.3 380 4 40 0.3 1:100

###

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3 4 5 7 10 12 15 16 20 25 28 35 40 50 70 100
Total Height(L1+L2) (mm) 74 74 74 74 74 85 85 85 85 85 85 85 85 85 85 85
Output torque ( mN.m) 777 1036 1296 1814 2592 3045 3807 4060 5076 6345 7106 8883 10000 10000 10000 10000
Total Weight(g) 470 470 470 470 470 570 570 570 570 570 570 570 570 570 570 570
Number of gear trains 1 2
Reducer Length(L2)   (mm) 40 51
Efficiency 96% 94%
To Be Negotiated 10 Pieces
(Min. Order)

###

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

General Specification:
Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 260N
Max.Shaft Axial Load 80N
Backlash at No-load 1 stage15′,2 stage20′

###

42HS Hybrid Stepping Motor Specifications:
Model No. Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 34 2.93 1.3 2.2 3.5 270 4 30 0.22 1:100
42HSC4409 40 2.5 1.5 1.65 3.3 380 4 40 0.3 1:100

###

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3 4 5 7 10 12 15 16 20 25 28 35 40 50 70 100
Total Height(L1+L2) (mm) 74 74 74 74 74 85 85 85 85 85 85 85 85 85 85 85
Output torque ( mN.m) 777 1036 1296 1814 2592 3045 3807 4060 5076 6345 7106 8883 10000 10000 10000 10000
Total Weight(g) 470 470 470 470 470 570 570 570 570 570 570 570 570 570 570 570
Number of gear trains 1 2
Reducer Length(L2)   (mm) 40 51
Efficiency 96% 94%

How to Assemble a Planetary Motor

A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.

VPLite

If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
Motor

VersaPlanetary

The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.

Self-centering planetary gears

A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Motor

Encoders

A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.

Cost

There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Motor

Applications

There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.

China 42 High Efficiency Ultra-Precision Stepper Motor with Planetary Reducer Gearbox for 3D Printer     manufacturer China 42 High Efficiency Ultra-Precision Stepper Motor with Planetary Reducer Gearbox for 3D Printer     manufacturer
editor by czh 2023-01-28